Research on Rebound Strength Measurement Curve of Modified Carbonation Depth of Machine-Made Sand Concrete
Publication: Journal of Materials in Civil Engineering
Volume 36, Issue 5
Abstract
In order to investigate the influence of carbonation treatment on the rebound strength measurement curve of machine-made sand concrete, this study conducted research on the carbonation mechanism sand concrete rebound strength measurement curve through rebound and compressive strength tests using carbonation degree and concrete strength grade as control variables. The results showed that in the short aging period, carbonation treatment had little effect on the compressive strength of manufactured sand concrete but could cause an increase in the rebound value measured by the high-strength and heavy rebound hammers. As the strength grade of the manufactured sand concrete increased, the rebound value measured by both the high-strength and heavy rebound hammers increased accordingly. Compared with the high-strength rebound hammer, the heavy rebound hammer had higher accuracy in detecting the rebound of the carbonated manufactured sand concrete. This study established measurement curves for uncorrected and corrected carbonation depths, among which the accuracy of the corrected carbonation depth measurement curve was higher. At the same time, this measurement curve has been applied to the rebound test of the Pinglu Canal Extra-Large Bridge Project in Guangxi, China, and its practicality and reliability have been verified.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This work was supported by the National Natural Science Foundation of China (Grant No. 52268064).
References
Agrawal, U. S., S. P. Wanjari, and D. N. Naresh. 2017. “Characteristic study of geopolymer fly ash sand as a replacement to natural river sand.” Constr. Build. Mater. 150 (Sep): 681–688. https://doi.org/10.1016/j.conbuildmat.2017.06.029.
Agrawal, U. S., S. P. Wanjari, and D. N. Naresh. 2019. “Impact of replacement of natural river sand with geopolymer fly ash sand on hardened properties of concrete.” Constr. Build. Mater. 209 (Jun): 499–507. https://doi.org/10.1016/j.conbuildmat.2019.03.134.
Akashi, T., S. Amasaki, and M. Kawasaki. 1984. Estimation of concrete strength by combined non-destructive testing method. Farmington Hills, MI: American Concrete Institute.
Arulmoly, B., C. Konthesingha, and A. Nanayakkara. 2021. “Performance evaluation of cement mortar produced with manufactured sand and offshore sand as alternatives for river sand.” Constr. Build. Mater. 297 (Aug): 123784. https://doi.org/10.1016/j.conbuildmat.2021.123784.
Auroy, M., S. Poyet, P. Le Bescop, J.-M. Torrenti, T. Charpentier, M. Moskura, and X. Bourbon. 2015. “Impact of carbonation on unsaturated water transport properties of cement-based materials.” Cem. Concr. Res. 74 (Aug): 44–58. https://doi.org/10.1016/j.cemconres.2015.04.002.
Barman, B., B. Kumar, and A. K. Sarma. 2019. “Impact of sand mining on alluvial channel flow characteristics.” Ecol. Eng. 135 (Sep): 36–44. https://doi.org/10.1016/j.ecoleng.2019.05.013.
Chen, X., G. Yuguang, B. Li, M. Zhou, B. Li, Z. Liu, and J. Zhou. 2020. “Coupled effects of the content and methylene blue value (MBV) of microfines on the performance of manufactured sand concrete.” Constr. Build. Mater. 240 (Mar): 117953. https://doi.org/10.1016/j.conbuildmat.2019.117953.
Chinese Standard. 2009. Test method for long-term performance and durability of ordinary concrete. GB/T50082-2009. Beijing: Chinese Standard.
Chinese Standard. 2011a. Pebbles and crushed stones for construction. GB/T 14685-2011. Beijing: Chinese Standard.
Chinese Standard. 2011b. Sand for construction. GB/T 14684-2011. Beijing: Chinese Standard.
Chinese Standard. 2011c. Specification for mix design of ordinary concrete. JGJ 55-2011. Beijing: Chinese Standard.
Chinese Standard. 2011d. Standard test methods of bitumen and bituminous mixtures for highway engineering. JTG 3420-2020. Beijing: Chinese Standard.
Chinese Standard. 2013. Technical specification for application of concrete admixtures. GB 50119-2013. Beijing: Chinese Standard.
Chinese Standard. 2015. Code for acceptance of construction quality of concrete structures. GB 50204-2015. Beijing: Chinese Standard.
Ding, X., C. Li, Y. Xu, F. Li, and S. Zhao. 2016a. “Dataset of long-term compressive strength of concrete with manufactured sand.” Data Brief 6 (Mar): 959–964. https://doi.org/10.1016/j.dib.2016.01.065.
Ding, X., C. Li, Y. Xu, F. Li, and S. Zhao. 2016b. “Experimental study on long-term compressive strength of concrete with manufactured sand.” Constr. Build. Mater. 108 (Mar): 67–73. https://doi.org/10.1016/j.conbuildmat.2016.01.028.
Dinh, H. L., J. Liu, D. E. L. Ong, and J. H. Doh. 2022. “A sustainable solution to excessive river sand mining by utilizing by-products in concrete manufacturing: A state-of-the-art review.” Cleaner Mater. 6 (Mar): 100140. https://doi.org/10.1016/j.clema.2022.100140.
Duong, V. B., R. Sahamitmongkol, and S. Tangtermsirikul. 2013. “Effect of leaching on carbonation resistance and steel corrosion of cement-based materials.” Constr. Build. Mater. 40 (Mar): 1066–1075. https://doi.org/10.1016/j.conbuildmat.2012.11.042.
Guan, M., Z. Lai, Q. Xiao, H. Du, and K. Zhang. 2019. “Bond behavior of concrete-filled steel tube columns using manufactured sand (MS-CFT).” Eng. Struct. 187 (Jul): 199–208. https://doi.org/10.1016/j.engstruct.2019.02.054.
Guo, F., C. Ye, and Z. Zeng. 2021. “Effect of curing conditions and mineral admixture content on the accuracy of concrete rebound method.” Constr. Qual. 39 (12): 53–59.
Jagadeesh, P. 2022. “Assessment of usage of manufactured sand and recycled aggregate as sustainable concrete: A review.” Mater. Today Proc. 64 (Jan): 1029–1034.
Ji, Y. S., M. Wu, B. Ding, F. Liu, and F. Gao. 2014. “The experimental investigation of width of semi-carbonation zone in carbonated concrete.” Constr. Build. Mater. 65 (Aug): 67–75. https://doi.org/10.1016/j.conbuildmat.2014.04.095.
Lakshmi, N. M., C. C. Gifta, S. S. Kumar, and S. Stephan. 2022. “Manufactured sand for the development of reinforced concrete spun pipes.” Mater. Today Proc. 64 (Jan): 1116–1121.
Li, F., K. Guo, and Y. Xu. 2011. “Experimental study on chloride diffusion and carbonation of concrete mixed with proto-machine-made sand.” Concrete 32 (12): 67–69.
Li, L. Z., W. Chen, and Q. B. Yao. 2014. “Actual measurement and analysis on the carbonization depth of the high titanium slag concrete.” In Proc., 2014 Int. Conf. on Mechanics and Civil Engineering, 796. Amsterdam, Netherlands: Atlantis Press.
Li, M., Y. Zhang, Y. Wang, Y. Li, E. Chen, and X. Yin. 2018. “Research on carbonation depth and mechanical properties of concrete of transmission lines in arid areas.” Bull. Chin. Ceram. Soc. 37 (5): 1556–1562.
Liu, M., W. Dai, C. Zhong, and X. Yang. 2023. “Study on mechanical properties and microstructure of manufactured sand reactive powder concrete with different curing methods.” Mater. Lett. 335 (Mar): 133818. https://doi.org/10.1016/j.matlet.2023.133818.
Mo, K. H., U. J. Alengaram, M. Z. Jumaat, M. Y. J. Liu, and J. Lim. 2016. “Assessing some durability properties of sustainable lightweight oil palm shell concrete incorporating slag and manufactured sand.” J. Cleaner Prod. 112 (Mar): 763–770. https://doi.org/10.1016/j.jclepro.2015.06.122.
Morandeau, A., M. Thiéry, and P. Dangla. 2014. “Investigation of the carbonation mechanism of CH and C-S-H in terms of kinetics, microstructure changes and moisture properties.” Cem. Concr. Res. 56 (May): 153–170. https://doi.org/10.1016/j.cemconres.2013.11.015.
Mupparisetty, V. K. R., and F. A. Mohammed. 2022. “Crushed stone dust as a replacement for river sand in self compacting repair mortars–A sustainable solution.” Mater. Today Proc. 52 (Jul): 1168–1174.
Needhidasan, S., B. Ramesh, and S. J. R. Prabu. 2020. “Experimental study on use of E-waste plastics as coarse aggregate in concrete with manufactured sand.” Mater. Today Proc. 22 (Mar): 715–721.
Pang, B., Z. Zhou, and H. Xu. 2015. “Utilization of carbonated and granulated steel slag aggregate in concrete.” Constr. Build. Mater. 84 (Mar): 454–467. https://doi.org/10.1016/j.conbuildmat.2015.03.008.
People’s Communications Publishing House. 2011. Technical code for construction of highway bridges and culverts. Beijing: Atlantis Press.
Rentier, E. S., and L. H. Cammeraat. 2022. “The environmental impacts of river sand mining.” Sci. Total Environ. 838 (Sep): 155877. https://doi.org/10.1016/j.scitotenv.2022.155877.
Russo, N., and F. Lollini. 2022. “Effect of carbonated recycled coarse aggregates on the mechanical and durability properties of concrete.” J. Build. Eng. 51 (Feb): 104290. https://doi.org/10.1016/j.jobe.2022.104290.
Shaanxi Academy of Building Sciences. 2011. Technical specification for testing concrete compressive strength by rebound method. Beijing: China Construction Industry Press.
Shen, W., Z. Yang, L. Cao, L. Cao, Y. Liu, H. Yang, Z. Lu, and J. Bai. 2016. “Characterization of manufactured sand: Particle shape, surface texture and behavior in concrete.” Constr. Build. Mater. 114 (Feb): 595–601. https://doi.org/10.1016/j.conbuildmat.2016.03.201.
Sheng, H. 2017. “Modified regional prediction curves of concrete strength considering carbonation depth through ultrasonic–rebound combined method.” J. Fuzhou Univ. 45 (4): 572–576.
Shi, J., J. Tan, B. Liu, J. Chen, J. Dai, and Z. He. 2021. “Experimental study on full-volume slag alkali-activated mortars: Air-cooled blast furnace slag versus machine-made sand as fine aggregates.” J. Hazard. Mater. 403 (Mar): 123983. https://doi.org/10.1016/j.jhazmat.2020.123983.
Song, S., J. Sun, and L. Shi. 2015. “Research on the misunderstanding of testing the compressive strength of commercial (pumped) concrete by rebound method.” Supplement, Archit. Technol. 46 (S2): 87–89.
Stefanoni, M., U. Angst, and B. Elsener. 2018. “Corrosion rate of carbon steel in carbonated concrete–A critical review.” Cem. Concr. Res. 103 (Nov): 35–48. https://doi.org/10.1016/j.cemconres.2017.10.007.
Sundaralingam, K., A. Peiris, A. Anburuvel, and N. Sathiparan. 2022. “Quarry dust as river sand replacement in cement masonry blocks: Effect on mechanical and durability characteristics.” Materialia 21 (Mar): 101324. https://doi.org/10.1016/j.mtla.2022.101324.
Xiao, J., H. Zhang, Y. Tang, Q. Deng, D. Wang, and C.-S. Poon. 2022. “Fully utilizing carbonated recycled aggregates in concrete: Strength, drying shrinkage and carbon emissions analysis.” J. Cleaner Prod. 377 (Mar): 134520. https://doi.org/10.1016/j.jclepro.2022.134520.
Xiaojun, T., C. Haibin, M. A. Qun, and W. U. Chunting. 2007. “Maximum likelihood method of establishing in-site the rebound strength curve.” J. Basic Sci. Eng. 15 (3): 380–386.
Xu, D. Z., G. H. Li, Z. Z. Liao, and H. W. Yan. 2013. “Study on carbonization test of manufactured sand concrete.” Appl. Mech. Mater. 423 (Dec): 1036–1040. https://doi.org/10.4028/www.scientific.net/AMM.423-426.1036.
Yang, R., R. Yu, Z. Shui, C. Guo, S. Wu, X. Gao, and S. Peng. 2019. “The physical and chemical impact of manufactured sand as a partial replacement material in Ultra-High Performance Concrete (UHPC).” Cem. Concr. Compos. 99 (May): 203–213. https://doi.org/10.1016/j.cemconcomp.2019.03.020.
Yi, C., H. Ma, H. Zhu, Z. Dong, Z. Su, Y. Zhang, and Z. Chu. 2017. “Investigation on anti-carbonation performance of coal gangue coarse aggregate concrete.” J. Build. Mater. 20 (5): 787–793.
Zhang, T., M. Chen, Y. Wang, and M. Zhang. 2023. “Roles of carbonated recycled fines and aggregates in hydration, microstructure and mechanical properties of concrete: A critical review.” Cem. Concr. Compos. 138 (Feb): 104994. https://doi.org/10.1016/j.cemconcomp.2023.104994.
Zhang, Y., L. Gu, and Q. Zhang. 2022. “Durability of manufactured sand concrete in atmospheric acidification environment.” Case Stud. Constr. Mater. 17 (Dec): e01613. https://doi.org/10.1016/j.cscm.2022.e01613.
Zhao, M., M. Dai, J. Li, and C. Li. 2023. “Case study on performance of pumping concrete with super-fine river-sand and manufactured-sand.” Case Stud. Constr. Mater. 18 (Jul): e01850. https://doi.org/10.1016/j.cscm.2023.e01850.
Zhao, S., F. Hu, X. Ding, M. Zhao, C. Li, and S. Pei. 2017. “Dataset of tensile strength development of concrete with manufactured sand.” Data Brief 11 (Apr): 469–472. https://doi.org/10.1016/j.dib.2017.02.043.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: May 9, 2023
Accepted: Oct 19, 2023
Published online: Feb 24, 2024
Published in print: May 1, 2024
Discussion open until: Jul 24, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.