Interface Shear Behavior of Ultrahigh-Performance Fiber-Reinforced Concrete Using Digital Image Correlation Technique
Publication: Journal of Materials in Civil Engineering
Volume 36, Issue 3
Abstract
Ensuring good interface shear resistance is essential in structural applications. Hence, understanding the interface shear behavior of ultrahigh-performance fiber-reinforced concrete (UHPFRC) is essential. The interface behavior of UHPFRC will be different from conventional concrete due to the absence of coarse aggregates and the presence of steel fibers. Therefore, this study involves testing 10 monolithically cast UHPFRC Z-shaped interface specimens with different volume fractions and types of fibers. The parameters considered in the study are 1.0% and 2.0% fiber volume and straight and hybrid (a combination of hooked-ended and straight steel) fibers. The interface shear crack load and possible types of failure modes are identified using the digital image correlation (DIC) technique. A direct tensile stress–strain and interface shear stress–strain relationship is also identified to propose a simplified interface shear capacity model. The cracking tensile strain across the shear interface is identified beyond the direct tension localization strain range. Similarly, the crack slip and width at different loading stages are evaluated, and it is identified that the crack-slip response is the same along the interface plane. On the contrary, the crack opening varies along the shear interface plane. Shear cracking and ultimate shear stress increased at higher fiber volume fractions due to the increased tensile strength of UHPFRC. The reduction in interface shear capacity is significant with the addition of hybrid fibers compared to the specimens with only straight steel fibers. This reduction is due to the lesser number of fibers across the shear interface in hybrid fiber-reinforced specimens. A simplified interface shear design model was developed based on experimental and literature data, where concrete tensile strength is a critical parameter in determining interface shear resistance.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors would also like to thank the Prime Minister’s Research Fellowship (ID: 2000825) and Fulbright Nehru Doctoral Research Fellowship (Grant No. 2746/FNDR/2022-2023) for supporting the researcher. The authors would also like to thank UltraTech Cement Limited, Master Builder’s Solutions-India (Mr.Neeraj Singh), Elkem Silicones South Asia Pvt. Ltd., for supplying materials for this research and Pyrodynamics for giving DIC license for analysis. Thanks to all CASTCON lab members.
References
Aaleti, S., and S. Sritharan. 2017. Investigation of a suitable shear friction interface between UHPC and normal strength concrete for bridge deck applications. Ames, IA: Iowa State Univ.
AASHTO. 2012. AASHTO LRFD bridge design specifications. Washington, DC: AASHTO.
Al-Osta, M. A., A. M. Sharif, S. Ahmad, S. K. Adekunle, M. Al-Huri, and A. M. Sharif. 2021. “Effect of hybridization of straight and hooked steel fibers and curing methods on the key mechanical properties of UHPC.” J. Mater. Res. Technol. 15 (Nov): 3222–3239. https://doi.org/10.1016/j.jmrt.2021.10.005.
Amr, A. S., and R. Ravi. 2022. “Shear behaviour of UHPC.” In Proc., ACI Fall Convention, Farmington Hills, MI: American Concrete Institute.
Andreasen, A. M., and J. Andersen. 1930. “Relation between grain size and interstitial space in products of unconsolidated granules.” Kolloid Z. 50 (3): 217–228. https://doi.org/10.1007/BF01422986.
Blunt, J., and C. P. Ostertag. 2009. “Performance-based approach for the design of a deflection hardened hybrid fiber-reinforced concrete.” J. Eng. Mech. 135 (9): 978–986. https://doi.org/10.1061/(ASCE)0733-9399(2009)135:9(978).
Correlated Solutions. 2021. Vic-2D software manual. Columbia, SC: Correlated Solutions.
Deng, Y., Z. Zhang, C. Shi, Z. Wu, and C. Zhang. 2023. “Steel fiber–matrix interfacial bond in ultra-high performance concrete: A review.” Engineering 22 (Mar): 215–232. https://doi.org/10.1016/j.eng.2021.11.019.
El-Helou, R. G., Z. B. Haber, and B. A. Graybeal. 2022. “Mechanical behavior and design properties of ultra-high-performance concrete.” ACI Mater. J. 119 (1): 181–194. https://doi.org/10.14359/51734194.
Fan, D. Q., R. Yu, Z. H. Shui, C. F. Wu, Q. L. Song, Z. J. Liu, Y. Sun, X. Gao, and Y. J. He. 2020. “A new design approach of steel fibre reinforced ultra-high performance concrete composites: Experiments and modeling.” Cem. Concr. Compos. 110 (Jul): 103597. https://doi.org/10.1016/j.cemconcomp.2020.103597.
Gesoglu, M., E. Güneyisi, G. F. Muhyaddin, and D. S. Asaad. 2016. “Strain hardening ultra-high performance fiber reinforced cementitious composites: Effect of fiber type and concentration.” Composites, Part B 103 (Oct): 74–83. https://doi.org/10.1016/j.compositesb.2016.08.004.
Gopal, B. A., F. Hejazi, M. Hafezolghorani, and Y. L. Voo. 2020. “Shear strength of dry and epoxy joints for ultra-high-performance fiber-reinforced concrete.” ACI Struct. J. 117 (1): 279–288. https://doi.org/10.14359/51718078.
Haber, Z. B., I. De la Varga, B. A. Graybeal, B. Nakashoji, and R. El-Helou. 2018. Properties and behavior of UHPC-class materials. Washington, DC: Federal Highway Administration, Office of Infrastructure Research and Development.
Hoang, K. H., P. Hadl, and N. V. Tue. 2016. “A new mix design method for UHPC based on stepwise optimization of particle packing density.” In Proc., 1st Int. Interactive Symp. on UHPC, 1–8. Ames, IA: Iowa State University Digital Press.
Hsu, T. T. C., S. T. Mau, and B. Chen. 1987. “Theory of shear transfer strength of reinforced concrete.” ACI Struct. J. 84 (2): 149–160. https://doi.org/10.14359/2834.
Jang, H. O., H. S. Lee, K. Cho, and J. Kim. 2017. “Experimental study on shear performance of plain construction joints integrated with ultra-high performance concrete (UHPC).” Constr. Build. Mater. 152: 16–23. https://doi.org/10.1016/j.conbuildmat.2017.06.156.
Jiang, H., T. Shao, Z. Fang, J. Xiao, and Z. Hu. 2021. “Shear-friction behavior of grooved construction joints between a precast UHPC girder and a cast-in-place concrete slab.” Eng. Struct. 228 (Feb): 111610. https://doi.org/10.1016/j.engstruct.2020.111610.
JSCE (Japan Society of Civil Engineers). 1990. Method of test for shear strength of steel fiber reinforced concrete. JSCE-SF6. Tokyo: JSCE.
Kaufmann, W., A. Amin, A. Beck, and M. Lee. 2019. “Shear transfer across cracks in steel fibre reinforced concrete.” Eng. Struct. 186 (May): 508–524. https://doi.org/10.1016/j.engstruct.2019.02.027.
Khanlou, A., G. A. Macrae, A. N. Scott, S. J. Hicks, and G. C. Clifton. 2012. “Shear performance of steel fibre-reinforced concrete.” In Proc., Australasian Structural Engineering Conf. Christchurch, New Zealand: Univ. of Canterbury Research Repository.
Li, C., Z. Feng, L. Ke, R. Pan, and J. Nie. 2019. “Experimental study on shear performance of cast-in-place ultra-high performance concrete structures.” Materials 12 (19): 3254. https://doi.org/10.3390/ma12193254.
Li, C., Z. Feng, R. Pan, L. Ke, J. He, and S. Dong. 2020. “Experimental and numerical investigation on the anchorage zone of prestressed UHPC box-girder bridge.” J. Bridge Eng. 25 (6): 04020028. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001556.
Liu, J., Z. Chen, D. Guan, Z. Lin, and Z. Guo. 2020. “Experimental study on interfacial shear behaviour between ultra-high performance concrete and normal strength concrete in precast composite members.” Constr. Build. Mater. 261 (Nov): 120008. https://doi.org/10.1016/j.conbuildmat.2020.120008.
Mansur, M. A., T. Vinayagam, and K.-H. Tan. 2008. “Shear transfer across a crack in reinforced high-strength concrete.” J. Mater. Civ. Eng. 20 (4): 294–302. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:4(294).
Mattock, A. H. 2001. “Shear friction and high-strength concrete.” ACI Struct. J. 98 (1): 50–59. https://doi.org/10.14359/10146.
Mattock, A. H., and N. M. Hawkins. 1972. “Shear transfer in reinforced concrete—Recent research.” PCI J. 17 (2): 55–75. https://doi.org/10.15554/pcij.03011972.55.75.
Muzenski, S., Z. B. Haber, and B. Graybeal. 2022. “Interface shear of ultra-high-performance concrete.” ACI Struct. J. 119 (1): 267–280. https://doi.org/10.14359/51733008.
Muzenski, S., Z. B. Haber, and B. Graybeal. 2023. “Monolithic and non-monolithic interface shear performance of ultra-high performance concrete.” Eng. Struct. 281 (Apr): 115667. https://doi.org/10.1016/j.engstruct.2023.115667.
Qi, J., Z. Wu, Z. J. Ma, and J. Wang. 2018. “Pullout behavior of straight and hooked-end steel fibers in UHPC matrix with various embedded angles.” Constr. Build. Mater. 191 (Dec): 764–774. https://doi.org/10.1016/j.conbuildmat.2018.10.067.
Soetens, T., and S. Matthys. 2017. “Shear-stress transfer across a crack in steel fibre-reinforced concrete.” Cem. Concr. Compos. 82 (Sep): 1–13. https://doi.org/10.1016/j.cemconcomp.2017.05.010.
Srikar, G., G. Anand, and S. S. Prakash. 2016. “A study on residual compression behavior of structural fiber reinforced concrete exposed to moderate temperature using digital image correlation.” Int. J. Concr. Struct. Mater. 10 (1): 75–85. https://doi.org/10.1007/s40069-016-0127-x.
Waseem, S. A., and B. Singh. 2018. “An experimental study on shear capacity of interfaces in recycled aggregate concrete.” Struct. Concr. 19 (1): 230–245. https://doi.org/10.1002/suco.201700032.
Wu, P., C. Wu, Z. Liu, and H. Hao. 2019. “Investigation of shear performance of UHPC by direct shear tests.” Eng. Struct. 183 (Mar): 780–790. https://doi.org/10.1016/j.engstruct.2019.01.055.
Yoo, D.-Y., H.-K. Sohn, P. H. R. Borges, R. Fediuk, and S. Kim. 2020. “Enhancing the tensile performance of ultra-high-performance concrete through strategic use of novel half-hooked steel fibers.” J. Mater. Res. Technol. 9 (3): 2914–2925. https://doi.org/10.1016/j.jmrt.2020.01.042.
Yu, R., P. H. J. H. Spiesz, and H. J. H. Brouwers. 2015. “Development of an eco-friendly ultra-high performance concrete (UHPC) with efficient cement and mineral admixtures uses.” Cem. Concr. Compos. 55 (Jan): 383–394. https://doi.org/10.1016/j.cemconcomp.2014.09.024.
Zhang, C., Z. Wu, C. Luo, X. Hu, K. Li, C. Shi, and N. Banthia. 2022. “Size effect of ultra-high-performance concrete under compression: Effects of steel fiber characteristics and water-to-binder ratio.” Constr. Build. Mater. 330 (May): 127170. https://doi.org/10.1016/j.conbuildmat.2022.127170.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Apr 18, 2023
Accepted: Aug 4, 2023
Published online: Dec 19, 2023
Published in print: Mar 1, 2024
Discussion open until: May 19, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.