Technical Papers
Nov 23, 2023

Fatigue Performance of Double-Layer Beams with an Interlayer Based on the Method of Equivalent Fatigue Life

Publication: Journal of Materials in Civil Engineering
Volume 36, Issue 2

Abstract

The bonding performance between a thin overlay and the pavement is an important basis for good performance of asphalt pavement. To research the effect of interlayer bonding on the fatigue life of thin overlays, three-point bending fatigue test was carried out on the double-layer beams with interlayer (DLBI). The equivalent fatigue life obtained by the Weibull distribution function was used to analyze the influence of stress ratio, loading frequency, immersion times, and freeze–thaw cycles on the fatigue life. The results suggest that the fatigue performance of DLBI was affected significantly by stress ratio, loading frequency, immersion times, and freeze–thaw cycles. The higher the loading frequency, the greater the effect of the stress ratio on the fatigue performance of the DLBI. The lower the stress ratio, the greater the effect of the loading frequency on fatigue performance of the DLBI. The fatigue life of the DLBI declined by 31.4% and 24.7% after 6 immersion days and five freeze–thaw cycles, respectively. The damage to DLBI caused by one freeze–thaw cycle was equivalent to that caused by 4 days of immersion. Models that take into account four kinds of environment factors to equivalent fatigue life prediction based on 50% failure probability and 5% failure probability, respectively, are proposed, with the equivalent fatigue life method. Taking the equivalent fatigue life as the indicator, the DLBI crack length expansion model is obtained, and the axle load conversion coefficients considering the influence of dynamic loads and adverse seasons factors are calculated. A method is proposed to judge the fracture of double-layer beams.

Get full access to this article

View all available purchase options and get full access to this article.

Data Availability Statement

All data and models generated or used during the study appear in the published article.

Acknowledgments

This work was supported by the Shandong Provincial Transportation Science and Technology Plan Project (2021B24), Ministry of Education’s Cooperative Education Project (202102102097), Enterprise Technology Innovation Project of Shandong Province (202160101409), and Shandong Jianzhu University Graduate Education Quality Improvement Program funded projects (No. 201107).

References

Castro, M., and J. A. Sánchez. 2008. “Estimation of asphalt concrete fatigue curves—A damage theory approach.” Constr. Build. Mater. 22 (6): 1232–1238. https://doi.org/10.1016/j.conbuildmat.2007.01.012.
Chen, J., and X. Huang. 2008. “Fatigue performance of old pavement asphalt mixtures after overlay.” J. Southeast Univ. (Nat. Sci. Ed.) 38 (3): 516–519.
Chen, Z., J. Wu, M. Feng, and J. Dai. 2003. “Season correcting coefficient of axle load conversion for asphalt pavement.” J. Chang’an Univ. (Nat. Sci. Ed.) 23 (6): 1–3.
Cheng, H. L., J. N. Liu, L. J. Sun, L. P. Liu, and Y. N. Zhang. 2021. “Fatigue behaviours of asphalt mixture at different temperatures in four-point bending and indirect tensile fatigue tests.” Constr. Build. Mater. 273 (May): 121675. https://doi.org/10.1016/j.conbuildmat.2020.121675.
Cui, Y., Q. Zhang, and X. Zhang. 2022. “Analysis of macro and meso fatigue characteristics of asphalt mixture composite small beam.” J. Build. Mater. 26 (1): 1–11.
Das, B. P., S. Das, and A. K. Siddaramaiah. 2021. “Probabilistic modeling of fatigue damage in asphalt mixture.” Constr. Build. Mater. 269 (Feb): 121300. https://doi.org/10.1016/j.conbuildmat.2020.121300.
Doh, Y. S., S. H. Baek, and K. W. Kim. 2009. “Estimation of relative performance of reinforced overlaid asphalt concretes against reflection cracking due to bending more fracture.” Constr. Build. Mater. 23 (5): 1803–1807. https://doi.org/10.1016/j.conbuildmat.2008.09.027.
Dong, J. 2015. “Research on axle load conversion of rubber particle asphalt mixture based on deflection and fatigue equivalence.” J. China Foreign Highway 35 (6): 260–264.
Du, J. 2017. Experimental study on fatigue of single and double deck asphalt mixtures. Chengdu, China: Southwest Jiaotong Univ.
Han, D., F. Shen, and L. Li. 2015. “Conversion of dynamic axle load on asphalt pavement considering friction coefficient.” J. South China Univ. Technol. (Nat. Sci. Ed.) 43 (4): 41–47.
Hristov, B. 2018. “Influence of different interface properties on the interlayer bond shear stiffness.” IOP Conf. Ser.: Mater. Sci. Eng. 365: 032056.
Hu, P., and X. Pan. 2011. “Equivalent standard axle load conversion in theory considering dynamic load.” J. Harbin Inst. Technol. 43 (6): 91–95.
Huang, X. 2017. Road subgrade and pavement engineering. Chengdu, China: People’s Transportation Publishing House.
Liu, H., X. Y. Yang, L. J. Jiang, S. T. Lv, T. Huang, and Y. Yang. 2020. “Fatigue-creep damage interaction model of asphalt mixture under the semi-sine cycle loading.” Constr. Build. Mater. 251 (Aug): 119070. https://doi.org/10.1016/j.conbuildmat.2020.119070.
Liu, P., J. Wang, W. Zhuang, H. Chen, S. Chen, and Y. Bi. 2019. “Study on the influence of asphalt content on fatigue life of asphalt mixture.” IOP Conf. Ser.: Earth Environ. 300 (2): 022023. https://doi.org/10.1088/1755-1315/300/2/022023.
Lv, S. 2012. “Axleload conversion of asphalt pavement based on nonlinear fatigue damage.” Eng. Mech. 29 (10): 268–274.
Lv, S., C. Liu, F. Qu, and J. Zheng. 2020. “Test methods and characterization of fatigue performance of asphalt mixtures: A review.” China J. Highway Transp. 33 (10): 67–75.
Mannan, U. A., M. R. Islam, and R. A. Tarefder. 2015. “Effects of recycled asphalt pavements on the fatigue life of asphalt under different strain levels and loading frequencies.” Int. J. Fatigue 78 (Jun): 72–80. https://doi.org/10.1016/j.ijfatigue.2015.04.004.
Ministry of Transport of the People’s Republic of China. 2011. Standard test methods of bitumen and bituminous mixtures for highway engineering. JTG E20-2011. Beijing: Ministry of Transport of the People’s Republic of China.
Ministry of Transport of the People’s Republic of China. 2017. Specifications for design of highway asphalt pavement. JTG D50/1-2017. Beijing: Ministry of Transport of the People’s Republic of China.
Modarres, A., and P. Ayar. 2016. “Comparing the mechanical properties of cold recycled mixture containing coal waste additive and ordinary portland cement.” Int. J. Pavement Eng. 17 (3): 211–224. https://doi.org/10.1080/10298436.2014.979821.
Ni, C., Y. Jiang, N. Zhang, and D. Yang. 2022. “Fatigue performance of SMA-13 formed by different compaction methods.” J. Nanjing Univ. Sci. Technol. 46 (3): 352–359.
Nian, T. 2019. Interlayer adhesive materials and anti-shearing performance of asphalt pavement on steep slope sections in seasonal frozen soil region. Lanzhou, China: Lanzhou Univ.
Nian, T. F., J. G. Li, P. Li, Z. C. Liu, R. Guo, J. Ge, and M. Wang. 2022. “Method to predict the interlayer shear strength of asphalt pavement based on improved back propagation neural network.” Constr. Build. Mater. 351 (Oct): 128969. https://doi.org/10.1016/j.conbuildmat.2022.128969.
Rahman, A. 2019. Experimental and computational investigation of the interface shear bonding performance between asphalt pavement layers. Chengdu, China: Southwest Jiaotong Univ.
Ren, J. L., D. Li, Y. S. Xu, J. D. Huang, and W. Liu. 2021. “Fatigue behavior of rock asphalt concrete considering moisture, high-temperature, and stress level.” Int. J. Pavement Eng. 23 (13): 4638–4648. https://doi.org/10.1080/10298436.2021.1969018.
Sadek, H., M. Sadeq, E. Masad, H. Al-Khalid, and O. Sirin. 2019. “Probabilistic viscoelastic continuum damage analysis of fatigue life of warm-mix asphalt.” J. Transp. Eng. Part B Pavements 145 (3): 04019024. https://doi.org/10.1061/JPEODX.0000128.
Safavizadeh, S. A., A. Wargo, M. Guddati, and Y. R. Kim. 2015. “Investigating reflective cracking mechanisms in grid-reinforced asphalt specimens: Use of four-point bending notched beam fatigue tests and digital image correlation.” Transp. Res. Rec. 2507 (1): 29–38. https://doi.org/10.3141/2507-04.
Shafabakhsh, G., M. Rajabi, and A. Sahaf. 2019. “The fatigue behavior of SBS/nanosilica composite modified asphalt binder and mixture.” Constr. Build. Mater. 229 (Dec): 116796. https://doi.org/10.1016/j.conbuildmat.2019.116796.
Shafabakhsh, G., and A. Saeed. 2021. “Reflective cracking reduction by a comparison between modifying asphalt overlay and sand asphalt interlayer: An experimental evaluation.” Int. J. Pavement Eng. 22 (2): 192–200. https://doi.org/10.1080/10298436.2019.1593410.
Sharma, H., and A. K. Swamy. 2016. “Development of probabilistic fatigue curve for asphalt concrete based on viscoelastic continuum damage mechanics.” Int. J. Pavement Res. Technol. 9 (4): 270–279. https://doi.org/10.1016/j.ijprt.2016.07.004.
Singh, P., and A. K. Swamy. 2019. “Probabilistic characterization of damage characteristic curve of asphalt concrete mixtures.” Int. J. Pavement Eng. 20 (6): 659–668. https://doi.org/10.1080/10298436.2017.1321420.
Su, X., H. Yan, and S. Lu. 2013. “Influencing factors on bonding effect between asphalt layers.” J. Chang’an Univ. (Nat. Sci. Ed.) 33 (3): 21–26.
Sun, N. 2014. Study on the performance contrast analysis of SBS and SBR modified emulsified asphalt for bonding layer. Xi’an, China: Chang’an Univ.
Tahami, S. A., M. Arabani, and A. F. Mirhosseini. 2018. “Usage of two biomass ashes as filler in hot mix asphalt.” Constr. Build. Mater. 170 (May): 547–556. https://doi.org/10.1016/j.conbuildmat.2018.03.102.
Wang, C., Y. Sun, and W. Wang. 2018. “Study on shear fatigue performance of tack coat materials and interlayer design method.” Mater. Rep. 32 (16): 2750–2756.
Wang, X., and Y. Zhong. 2019. “Influence of tack coat on reflective cracking propagation in semi-rigid base asphalt pavement.” Eng. Fract. Mech. 213 (May): 172–181.
Yang, K., R. Li, Y. Yu, and J. Z. Pei. 2021. “Unified laboratorial evaluation of interlayer bond property in asphalt pavements based on strength parameters.” Constr. Build. Mater. 273 (Mar): 121738. https://doi.org/10.1016/j.conbuildmat.2020.121738.
Yang, K., R. Li, Y. Yu, J. Z. Pei, and T. Liu. 2020. “Evaluation of interlayer stability in asphalt pavements based on shear fatigue property.” Constr. Build. Mater. 258 (Oct): 119628. https://doi.org/10.1016/j.conbuildmat.2020.119628.
Yin, H., Y. Zhu, and C. Yin. 2013. “Study on the mechanical properties of tack coat between asphalt layers by interlaminar shear tests.” Appl. Mech. Mater. 361–363 (Oct): 1490–1494. https://doi.org/10.4028/www.scientific.net/AMM.361-363.1490.
Zeng, M., L. Peng, and C. Wu. 2012. “Experimental study of the performance of ultrathin asphalt friction course.” J. Wuhan Univ. Technol. 34 (4): 27–31.
Zhang, B., Y. Ma, Q. Zhang, L. Wang, and L. Wang. 2014. “Checking measures of asphalt pavement structure under overloading.” J. Chang’an Univ. (Nat. Sci. Ed). 34 (1): 1–6.
Zhang, H. W., B. L. Sun, and Y. X. Li. 2022. “Adhesive property and road performance evaluation of asphalt overlay pavement with geotextile interlayer.” Adv. Mater. Sci. Eng. 2022 (Jun): 3084668. https://doi.org/10.1155/2022/3084668.
Zhang, X. 2021. Study on fatigue characteristics of asphalt mixture with interlayer interface under long-term aging. Inner Mongolia, China: Inner Mongolia Univ. of Technology.
Zhang, Z. Y., Q. Liu, Q. Wu, H. N. Xu, P. F. Liu, and M. Oeser. 2021. “Damage evolution of asphalt mixture under freeze-thaw cyclic loading from a mechanical perspective.” Int. J. Fatigue 142 (Jan): 105923. https://doi.org/10.1016/j.ijfatigue.2020.105923.
Zhang, Z. Y., and M. Oeser. 2020. “Residual strength model and cumulative damage characterization of asphalt mixture subjected to repeated loading.” Int. J. Fatigue 135 (Jun): 105534. https://doi.org/10.1016/j.ijfatigue.2020.105534.
Zhao, Q., X. Lu, S. Jing, Y. Liu, W. Hu, M. Su, P. Wang, J. Liu, M. Sun, and Z. Li. 2022. “Properties of SBS/MCF-modified asphalts mixtures used for ultra-thin overlays.” Coatings 12 (4): 432. https://doi.org/10.3390/coatings12040432.
Zhao, Q., X. Lu, S. Jing, X. Yao, M. Sun, L. Geng, R. Ren, L. Wang, J. Liu, and L. Qiu. 2023. “The fatigue mechanism of asphalt mixture with an interlayer under the combined effect of multiple factors.” Constr. Build. Mater. 384 (Jun): 131428. https://doi.org/10.1016/j.conbuildmat.2023.131428.
Zhou, J. 2021. Research on mechanical properties of asphalt mixture with interlayer interface under water and salt erosion. Inner Mongolia, China: Inner Mongolia Univ. of Technology.
Zhu, X. 2019. Study on asphalt mixture design and pavement performance for ultra-thin overlay. Guangzhou, China: Guangzhou Univ.

Information & Authors

Information

Published In

Go to Journal of Materials in Civil Engineering
Journal of Materials in Civil Engineering
Volume 36Issue 2February 2024

History

Received: Apr 12, 2023
Accepted: Jul 24, 2023
Published online: Nov 23, 2023
Published in print: Feb 1, 2024
Discussion open until: Apr 23, 2024

Permissions

Request permissions for this article.

Authors

Affiliations

Quanman Zhao [email protected]
Assistant Professor, School of Transportation Engineering, Shandong Jianzhu Univ., Jinan 250101, China; Assistant Professor, School of Traffic Institute, Kashi Univ., Kashi 844008, China. Email: [email protected]
Xiaojin Lu
Postgraduate Student, School of Transportation Engineering, Shandong Jianzhu Univ., Jinan 250101, China.
Li Wu
Postgraduate Student, School of Transportation Engineering, Shandong Jianzhu Univ., Jinan 250101, China.
Shuo Jing
Postgraduate Student, School of Transportation Engineering, Shandong Jianzhu Univ., Jinan 250101, China.
Lecturer, School of Transportation Engineering, Shandong Jianzhu Univ., Jinan 250101, China (corresponding author). Email: [email protected]
Wenjun Hu
Assistant Professor, School of Transportation Engineering, Shandong Jianzhu Univ., Jinan 250101, China.
Jifa Liu
Deputy Director, Shandong Taishan Communications Planning and Design Consulting Co., Ltd., Taian 271000, China.

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share