Experimental and Numerical Investigation of Ballistic Impact Response of Polymethylmetacrylate
Publication: Journal of Materials in Civil Engineering
Volume 36, Issue 6
Abstract
For understanding characteristics of polymethylmetacrylate (PMMA) under impact, the damage behavior of PMMA plates with various thicknesses (1.5 to 6.0 mm) subjected to ballistic impacts with various velocities (63 to ) is experimentally investigated using a specialized testing apparatus. Moreover, numerical simulations using FEM are conducted for the corresponding experimentally studied cases. Ductile response and brittle tensile failure behavior are considered in the FEM to describe the nonlinear response and the failure mode of the PMMA plates. The numerical simulations effectively describe the shape of cracks and perforations of the PMMA plates for all studied 25 cases, verifying the validity of the numerical model. Although the PMMA plates are generally brittle in the selected range of impact velocity, it was found that these plates exhibit ductile behavior under low-velocity impacts. Moreover, the numerical simulations imply that the kinetic energy loss of the projectile is linearly dependent on the plate thickness, whereas the impact velocity hardly affects this loss. This behavior obtained experimentally and numerically illustrates the usefulness of the PMMA material for the use as a protective layer in many applications involving ballistic (high-velocity) impacts.
Practical Applications
This study delves into the impact behavior of PMMA plates, offering insights with a range of practical implications. This research positions PMMA as a promising protective material for applications exposed to high-velocity impacts. The comprehensive understanding of failure modes aids in designing resilient PMMA structures. By subjecting PMMA plates of varying thicknesses (1.5 to 6.0 mm) to ballistic impacts at different velocities (63 to ), this research reveals a nuanced interplay between ductile and brittle behavior within the material. The study uncovers a ductile response of the PMMA plates under low-velocity impacts, expanding the material’s potential use in scenarios with lower impact velocities. Moreover, the linear relationship established between plate thickness and kinetic energy loss of the projectile, independent of the impact velocity, provides a practical basis for designing impact-resistant PMMA structures. The practical applications of the study extend to fields such as architectural glazing, automotive safety, and aerospace engineering, where protective materials play a crucial role in safeguarding against unexpected impacts. In summary, this study empowers practical decision-making by uncovering the PMMA’s impact response, thereby contributing to optimized protective solutions across various domains.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This work has been financially supported by the Taisei Chair of Civil Engineering at the University of California, Berkeley. The assistance of the laboratory staff at the Pacific Earthquake Engineering Research Center (PEER) Center is highly appreciated. The authors thank Professor T. Zohdi for his technical input during this study.
References
Barthes, C. 2022. “OpteCAL.” Accessed January 20, 2022. https://optecal.com/.
Bless, S., B. Peden, I. Guzman, M. Omidvar, and M. Iskander. 2014. “Poncelet coefficients of granular media.” In Dynamic Behavior of Materials, Volume 1: Proc., 2013 Annual Conf. on Experimental and Applied Mechanics, edited by B. Song, D. Casem, and J. Kimberley, 373–380. Berlin: Springer. https://doi.org/10.1007/978-3-319-00771-7_45.
Dong, Y., S. Feng, G. Huang, C. Liu, L. Xiao, and Q. Song. 2012. “Ballistic impact characteristics of flat-nose projectile penetrating concrete and soil compound target.” Int. J. Nonlinear Sci. Numer. Simul. 13 (3–4): 255–260. https://doi.org/10.1515/ijnsns-2011-0144.
Dorogoy, A., and D. Rittel. 2014. “Impact of thick PMMA plates by long projectiles at low velocities. Part II: Effect of confinement.” Mech. Mater. 70 (Mar): 53–66. https://doi.org/10.1016/j.mechmat.2013.11.009.
Dorogoy, A., D. Rittel, and A. Brill. 2010. “A study of inclined impact in polymethylmethacrylate plates.” Int. J. Impact Eng. 37 (3): 285–294. https://doi.org/10.1016/j.ijimpeng.2009.06.013.
Gama, B. A., S. L. Lopatnikov, and J. W. Gillespie Jr. 2004. “Hopkinson bar experimental technique: A critical review.” Appl. Mech. Rev. 57 (4): 223–250. https://doi.org/10.1115/1.1704626.
Gee, B., M. Parchei-Esfahani, and R. Gracie. 2020. “XFEM simulation of a mixed-mode fracture experiment in PMMA.” Eng. Fract. Mech. 229 (Apr): 106945. https://doi.org/10.1016/j.engfracmech.2020.106945.
Hanifehzadeh, M., and M. M. R. Mousavi. 2019. “Predicting the structural performance of sandwich concrete panels subjected to blast load considering dynamic increase factor.” J. Civ. Eng. Sci. Technol. 10 (1): 45–58. https://doi.org/10.33736/jcest.1067.2019.
Hibbitt, Karlsson, & Sorensen. 1998. Vol. 1 of ABAQUS/Explicit: User’s manual. Pawtucket, RI: Hibbitt, Karlsson and Sorenson.
Hsieh, A. J., D. DeSchepper, P. Moy, P. G. Dehmer, and J. W. Song. 2004. “The effects of PMMA on ballistic impact performance of hybrid hard/ductile all-plastic- and glass-plastic-based composites.” Army Research Laboratory. Accessed January 10, 2022. https://apps.dtic.mil/sti/citations/ADA420878.
Jiang, F., and K. S. Vecchio. 2009. “Hopkinson bar loaded fracture experimental technique: A critical review of dynamic fracture toughness tests.” Appl. Mech. Rev. 62 (6): 1–39. https://doi.org/10.1115/1.3124647.
Kajisa, T., H. Miyauchi, K. Mizuhara, K. Hayashi, T. Tokimitsu, M. Inoue, K. Hara, and A. Masuda. 2014. “Novel lighter weight crystalline silicon photovoltaic module using acrylic-film as a cover sheet.” Jpn. J. Appl. Phys. 53 (9): 092302. https://doi.org/10.7567/JJAP.53.092302.
Kueh, A. B. H., and Y. Y. Siaw. 2021. “Impact resistance of bio-inspired sandwich beam with side-arched and honeycomb dual-core.” Compos. Struct. 275 (Nov): 114439. https://doi.org/10.1016/j.compstruct.2021.114439.
Martins, A. C., V. Chapuis, F. Sculati-Meillaud, A. Virtuani, and C. Ballif. 2018. “Light and durable: Composite structures for building-integrated photovoltaic modules.” Prog. Photovolt. Res. Appl. 26 (9): 718–729. https://doi.org/10.1002/pip.3009.
Ogihara, S., T. Ishigure, and A. Kobayashi. 1998. “Study on impact perforation fracture mechanism in PMMA.” J. Mater. Sci. Lett. 17 (8): 691–692. https://doi.org/10.1023/A:1006653231432.
Pan, B. 2018. “Digital image correlation for surface deformation measurement: Historical developments, recent advances and future goals.” Meas. Sci. Technol. 29 (8): 082001. https://doi.org/10.1088/1361-6501/aac55b.
Patel, P. J., A. J. Hsieh, and G. A. Gilde. 2006. “Improved low-cost multi-hit transparent armor.” In Proc., 25th Army Science Conf. Orlando, FL: Defense Technical Information Center.
Pawar, E. 2016. “Strength appraisal of fibre reinforced concrete with partial replacement of OPC with mineral admixtures (fly ash, GGBS, metakaolin).” IOSR J. Mech. Civ. Eng. 13 (2): 1–04. https://doi.org/10.9790/1684-1302010104.
Pereira, L. F., J. Weerheijm, and L. J. Sluys. 2018. “Simulation of compaction and crushing of concrete in ballistic impact with a new damage model.” Int. J. Impact Eng. 111 (Jan): 208–221. https://doi.org/10.1016/j.ijimpeng.2017.09.014.
Petrudi, A. M., K. Vahedi, M. Rahmani, and M. M. Petrudi. 2020. “Numerical and analytical simulation of ballistic projectile penetration due to high velocity impact on ceramic target.” Frattura Ed Integrita Strutturale 14 (54): 226–248. https://doi.org/10.3221/IGF-ESIS.54.17.
Rittel, D., and A. Brill. 2008. “Dynamic flow and failure of confined polymethylmethacrylate.” J. Mech. Phys. Solids 56 (4): 1401–1416. https://doi.org/10.1016/j.jmps.2007.09.003.
Rittel, D., and A. Dorogoy. 2008. “A methodology to assess the rate and pressure sensitivity of polymers over a wide range of strain rates.” J. Mech. Phys. Solids 56 (11): 3191–3205. https://doi.org/10.1016/j.jmps.2008.08.001.
Sarva, S., A. D. Mulliken, M. C. Boyce, and A. J. Hsieh. 2006. “Mechanics of transparent polymeric material assemblies under projectile impact: Simulations and experiments.” In Transformational science and technology for the current and future force: (With CD-ROM), 227–234. Toh Tuck, Singapore: World Scientific. https://doi.org/10.1142/9789812772572_0029.
Scari, A. D. S., B. C. Pockszevnicki, J. Landre Junior, and P. A. A. Magalhaes Junior. 2014. “Stress-strain compression of AA6082-T6 aluminum alloy at room temperature.” J. Struct. 2014 (Nov): 1–7. https://doi.org/10.1155/2014/387680.
Smith, M. 2009. ABAQUS/standard user’s manual. Version 6. Johnston, RI: Dassault Systemes Simulia.
Zahid, M. A., H. Park, Y. H. Cho, and J. Yi. 2021. “Plasma etched PMMA/CaF2 anti-reflection coating for light weight PV module.” Opt. Mater. 112 (Feb): 110813. https://doi.org/10.1016/j.optmat.2021.110813.
Zhang, J., T. Jin, Z. Wang, and L. Zhao. 2016. “Experimental investigation on yield behavior of PMMA under combined shear-compression loading.” Results Phys. 6 (Jun): 265–269. https://doi.org/10.1016/j.rinp.2016.05.004.
Zhang, W., S. A. Tekalur, and L. Huynh. 2010. “Impact behavior and dynamic failure of PMMA and PC plates.” In Dynamic Behavior of Materials, Volume 1: Proc., 2010 Annual conf. on Experimental and Applied Mechanics, 93–104. Berlin: Springer.
Zhou, Z., B. Su, Z. Wang, Z. Li, X. Shu, and L. Zhao. 2013. “Shear-compression failure behavior of PMMA at different loading rates.” Mater. Lett. 109 (Oct): 151–153. https://doi.org/10.1016/j.matlet.2013.05.081.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Mar 9, 2023
Accepted: Nov 15, 2023
Published online: Mar 25, 2024
Published in print: Jun 1, 2024
Discussion open until: Aug 25, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.