Discussion of “Comprehensive Study on Mechanical and Environmental Characteristics of Cement-Treated Granular Steel Slag as Subballast Layer”
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Materials in Civil Engineering
Volume 35, Issue 11
Get full access to this article
View all available purchase options and get full access to this article.
References
Akcil, A., I. Agcasulu, and B. Swain. 2019. “Valorization of waste LCD and recovery of critical raw material for circular economy: A review.” Resour. Conserv. Recycl. 149 (Oct): 622–637. https://doi.org/10.1016/j.resconrec.2019.06.031.
Arrieta Baldovino, J. D. J., R. L. dos Santos Izzo, É. R. da Silva, and J. Lundgren Rose. 2020. “Sustainable use of recycled-glass powder in soil stabilization.” J. Mater. Civ. Eng. 32 (5): 04020080. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003081.
Bruschi, G. J., C. P. dos Santos, S. T. Ferrazzo, M. T. de Araújo, and N. C. Consoli. 2021. “Parameters controlling loss of mass and stiffness degradation of ‘green’ stabilised tailings.” Proc. Inst. Civ. Eng. - Geotech. Eng. (Oct): 1–9. https://doi.org/10.1680/jgeen.21.00119.
Consoli, N. C., L. Festugato, H. C. S. Filho, G. D. Miguel, A. T. Neto, and D. Andreghetto. 2020. “Durability assessment of soil-pozzolan-lime blends through ultrasonic-pulse velocity test.” J. Mater. Civ. Eng. 32 (8): 04020223. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003298.
Consoli, N. C., L. Festugato, G. D. Miguel, E. B. Moreira, and H. C. Scheuermann Filho. 2021. “Fatigue life of green stabilized fiber-reinforced sulfate-rich dispersive soil.” J. Mater. Civ. Eng. 33 (9): 04021249. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003842.
Consoli, N. C., D. Foppa, L. Festugato, and K. S. Heineck. 2007. “Key parameters for strength control of artificially cemented soils.” J. Geotech. Geoenviron. Eng. 133 (2): 197–205. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:2(197).
da Silva, A., L. Festugato, J. V. L. Daronco, and E. D. S. Menger. 2022. “Mechanical response of a sand, reclaimed-asphalt pavement, and portland cement mixture.” J. Mater. Civ. Eng. 34 (9): 04022213. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004361.
Diambra, A., E. Ibraim, L. Festugato, and M. B. Corte. 2021. “Stiffness of artificially cemented sands: Insight on characterisation through empirical power relationships.” Road Mater. Pavement Des. 22 (6): 1469–1479. https://doi.org/10.1080/14680629.2019.1705379.
Diambra, A., E. Ibraim, A. Peccin, N. C. Consoli, and L. Festugato. 2017. “Theoretical derivation of artificially cemented granular soil strength.” J. Geotech. Geoenviron. Eng. 143 (5): 04017003. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001646.
Dias Miguel, G., L. Festugato, E. Batista Moreira, and M. Bellaver Corte. 2021. “Geopolymers based on recycled glass powder for soil stabilization.” Geotech. Geol. Eng. 39 (6): 4649–4653. https://doi.org/10.1007/s10706-021-01762-7.
Ekinci, A., H. C. Scheuermann Filho, and N. C. Consoli. 2022. “Copper slag–hydrated lime–portland cement stabilised marine-deposited clay.” Proc. Inst. Civ. Eng. Ground Improv. 175 (1): 51–63. https://doi.org/10.1680/jgrim.18.00123.
Festugato, L., A. Fourie, and N. C. Consoli. 2013. “Cyclic shear response of fibre-reinforced cemented paste backfill.” Géotech. Lett. 3 (1): 5–12. https://doi.org/10.1680/geolett.12.00042.
Festugato, L., A. Peccin da Silva, A. Diambra, N. C. Consoli, and E. Ibraim. 2018. “Modelling tensile/compressive strength ratio of fibre reinforced cemented soils.” Geotext. Geomembr. 46 (2): 155–165. https://doi.org/10.1016/j.geotexmem.2017.11.003.
Gschösser, F., H. Wallbaum, and M. E. Boesch. 2012. “Life-cycle assessment of the production of Swiss road materials.” J. Mater. Civ. Eng. 24 (2): 168–176. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000375.
Hanafi, M., A. Ekinci, and E. Aydin. 2022. “Engineering and microstructural properties of alluvium clay stabilized with portland cement and coal bottom ash for sustainable future.” KSCE J. Civ. Eng. 26 (12): 5049–5066. https://doi.org/10.1007/s12205-022-2388-z.
Hoch, B. Z., A. Diambra, E. Ibraim, L. Festugato, and N. C. Consoli. 2022. “Strength and stiffness of compacted chalk putty–cement blends.” Acta Geotech. 17 (7): 2955–2969. https://doi.org/10.1007/s11440-021-01415-2.
Marques, S. F. V., L. Festugato, and N. C. Consoli. 2021. “Stiffness and strength of an artificially cemented sand cured under stress.” Granular Matter 23 (2): 35. https://doi.org/10.1007/s10035-021-01099-1.
Martins, F. F., and H. Castro. 2020. “Raw material depletion and scenario assessment in European Union: A circular economy approach.” Supplement, Energy Rep. 6 (S1): 417–422. https://doi.org/10.1016/j.egyr.2019.08.082.
Menger, E. D. S., M. Benetti, L. Festugato, L. D. S. Ibeiro, and R. D. Luza. 2020. “Hydraulic conductivity and compressive strength of cemented soils.” Geotech. Geol. Eng. 38 (6): 6031–6039. https://doi.org/10.1007/s10706-020-01411-5.
Mignacca, B., and G. Locatelli. 2021. “Modular circular economy in energy infrastructure projects: Enabling factors and barriers.” J. Manage. Eng. 37 (5): 04021053. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000949.
Pereira dos Santos, C., G. J. Bruschi, J. R. G. Mattos, and N. C. Consoli. 2022. “Stabilization of gold mining tailings with alkali-activated carbide lime and sugarcane bagasse ash.” Transp. Geotech. 32 (Jan): 100704. https://doi.org/10.1016/j.trgeo.2021.100704.
Scheuermann Filho, H. C., G. Dias Miguel, and N. Cesar Consoli. 2022. “Porosity/cement index over a wide range of porosities and cement contents.” J. Mater. Civ. Eng. 34 (3): 06021011. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004115.
Silvani, C., E. Ibraim, H. C. Scheuermann Filho, L. Festugato, A. Diambra, and N. C. Consoli. 2022. “Sand-fly ash-lime blends: Mechanical behavior under multiaxial stress condition.” J. Mater. Civ. Eng. 34 (5): 04022059. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004199.
Sinyoung, S., S. Asavapisit, and K. Kunchariyakun. 2022. “Investigation of bagasse ash as an alternative raw material in clinker production.” J. Mater. Civ. Eng. 34 (2): 04021433. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004073.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 35 • Issue 11 • November 2023
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Nov 1, 2022
Accepted: Dec 22, 2022
Published online: Aug 28, 2023
Published in print: Nov 1, 2023
Discussion open until: Jan 28, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.