Applying Adsorption Kinetics of Modified Fiber to Four Components of Asphalt
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 10
Abstract
Fiber-modified asphalt has excellent road performance, but the mechanism of this enhancement still requires deeper understanding. Herein, the interfacial interaction between fibers and asphalt is explored using an adsorption kinetic model with the adsorption of fibers on the four components of asphalt as a criterion. The proposed pseudo-first-order kinetic model and pseudo-second-order kinetic model were developed using aramid fibers (AF) and AF-polydopamine (PDA)-octadecylamine (ODA) (AF-PDA-ODA), which were prepared by grafting ODA onto AF with PDA and nacre fibers and molybdenum disulfide (). Fourier-transform infrared (FT-IR) spectroscopy analysis confirmed that the modified fibers exhibit physical and chemical cross-linking with the four components of asphalt, which facilitated the uniform distribution of fiber and effectively improved its compatibility with asphalt. This led to the formation of an excellent network structure that consequently boosted the rheological properties of the modified-fiber-incorporated asphalt.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This work was supported by Natural Science Foundation of Guangxi Province and the Innovative Research Group Project of the National Natural Science Foundation of China (51768007).
References
Ali, S., A. Ismail, N. Yusoff, M. R. Karim, R. A. Al-Mansob, and D. I. Alhamali. 2015. “Physical and rheological properties of acrylate–styrene–acrylonitrile modified asphalt cement.” Constr. Build. Mater. 93 (Sep): 326–334. https://doi.org/10.1016/j.conbuildmat.2015.05.016.
Antonio, H. 1995. A guide to the complete interpretation of infrared spectra of organic structures. New York: Wiley.
ASTM. 2009. Standard test method for separation of asphalt into four fractions. ASTM D4124–09. West Conshohocken, PA: ASTM.
Badeli, S., A. Carter, G. Doré, and S. Saliani. 2018. “Evaluation of the durability and the performance of an asphalt mix involving Aramid Pulp Fiber (APF): Complex modulus before and after freeze-thaw cycles, fatigue, and TSRST tests.” Constr. Build. Mater. 174 (Jun): 60–71. https://doi.org/10.1016/j.conbuildmat.2018.04.103.
Chen, H., and Q. Xu. 2010. “Experimental study of fibers in stabilizing and reinforcing asphalt binder.” Fuel 89 (7): 1616–1622. https://doi.org/10.1016/j.fuel.2009.08.020.
Chen, J., Y. Zhu, Q. Ni, Y. Fu, and F. Xiang. 2014. “Surface modification and characterization of aramid fibers with hybrid coating.” Appl. Surf. Sci. 321 (321): 103–108. https://doi.org/10.1016/j.apsusc.2014.09.196.
Chen, S., H. Xu, X. He, Y. Su, B. Zhang, and Q. Liu. 2022. “Oil-grinded recycled kapok fiber as a bio-packing for eco-friendly modified asphalt and its aging resistance behavior.” Constr. Build. Mater. 320 (12): 126293. https://doi.org/10.1016/j.conbuildmat.2021.126293.
Chen, Y., Z. Li, and Z. Li. 2012. “Study of road property of basalt fiber asphalt concrete.” Appl. Mech. Mater. 238 (8): 22–25. https://doi.org/10.4028/www.scientific.net/AMM.238.22.
Cheng, Z., L. Zhang, C. Jiang, Y. Dai, C. Meng, L. Luo, and X. Liu. 2018. “Aramid fiber with excellent interfacial properties suitable for resin composite in a wide polarity range.” Chem. Eng. J. 347 (8): 483–492. https://doi.org/10.1016/j.cej.2018.04.149.
Chohan, Z. H., M. H. Youssoufi, A. Jarrahpour, and T. B. Hadda. 2010. “Identification of antibacterial and antifungal pharmacophore sites for potent bacteria and fungi inhibition: Indolenyl sulfonamide derivatives.” Eur. J. Med. Chem. 45 (3): 1189–1199. https://doi.org/10.1016/j.ejmech.2009.11.029.
Fan, Z., J. Lin, J. Xu, B. Hong, P. Liu, D. Wang, and M. Oeser. 2022. “Molecular insights into the adsorption configuration of bitumen colloidal on aggregate surface.” J. Mater. Civ. Eng. 34 (4): 04022033. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004180.
Gamboa, F., P. I. Gonzalez-Chi, G. Canché-Escamilla, S. Duarte-Aranda, M. Yazdani-Pedra, P. Toro, M. A. Mazo, and A. Nistal. 2016. “Deposition of carbon nanotubes onto aramid fibers using as-received and chemically modified fibers.” Appl. Surf. Sci. 385 (Nov): 379–390. https://doi.org/10.1016/j.apsusc.2016.05.037.
Gonzalez-Chi, P. I., O. Rodriguez-Uicab, C. Martin-Barrera, J. Uribe-Calderon, G. Canche-Escamilla, M. Yazdani-Pedram, A. May-Pat, and F. Aviles. 2017. “Influence of aramid fiber treatment and carbon nanotubes on the interfacial strength of polypropylene hierarchical composites.” Composites, Part B 122 (Aug): 16–22. https://doi.org/10.1016/j.compositesb.2017.04.006.
Han, J. K., and J. H. Song. 2019. “Improvement in the mechanical properties of carbon and aramid composites by fiber surface modification using polydopamine.” Composites, Part B 160 (Mar): 31–36. https://doi.org/10.1016/j.compositesb.2018.10.027.
Hirschberg, A., L. N. J. Dejong, B. A. Schipper, and J. G. Meijer. 1984. “Influence of temperature and pressure on asphaltene flocculation.” Soc. Pet. Eng. J. 24 (3): 283–293. https://doi.org/10.2118/11202-PA.
Khandelwal, S., and K. Y. Rhee. 2020. “Recent advances in basalt-fiber-reinforced composites: Tailoring the fiber-matrix interface.” Composites, Part B 192 (Aug): 108011. https://doi.org/10.1016/j.compositesb.2020.108011.
Khare, S. K., K. K. Panday, R. M. Srivastava, and V. N. Singh. 1987. “Removal of victoria blue from aqueous solution by fly ash.” J. Chem. Technol. Biotechnol. 38 (2): 99–104. https://doi.org/10.1002/jctb.280380206.
Kou, C., Z. Chen, A. Kang, M. Zhang, and R. Wang. 2022. “Rheological behaviors of asphalt binders reinforced by various fibers.” Constr. Build. Mater. 323 (Jul): 126626. https://doi.org/10.1016/j.conbuildmat.2022.126626.
Lagergren, S. 1898. “Zur theorie der sogenannten adsorption geloster stoffe.” Kungliga svenska vetenskapsakademiens. Handlingar 24: 1–39.
Lertwassana, W., T. Parnklang, P. Mora, C. Jubsilp, and S. Rimdusit. 2019. “High performance aramid pulp/carbon fiber reinforced polybenzoxazine composites as friction materials.” Composites, Part B. 177 (9): 107280. https://doi.org/10.1016/j.compositesb.2019.107280.
Li, C., S. Fan, and T. Xu. 2021a. “Method for evaluating compatibility between SBS modifier and asphalt matrix using molecular dynamics models.” J. Mater. Civ. Eng. 33 (8): 04021207. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003863.
Li, J., Z. Su, J. Huang, W. Feng, T. Wei, K. Meng, and Y. Muhammad. 2021b. “Performance of biomimetic coating modified fiber incorporated styrene butadiene styrene modified asphalt.” J. Appl. Polym. Sci. 138 (10): 49967. https://doi.org/10.1002/app.49967.
Li, S., S. Tian, Y. Feng, J. Lei, P. Wang, and Y. Xiong. 2010. “A comparative investigation on absorption performances of three expanded graphite-based complex materials for toluene.” J. Hazard. Mater. 183 (1–3): 506–511. https://doi.org/10.1016/j.jhazmat.2010.07.052.
Li, X., L. Zhang, Z. Yang, P. Wang, Y. Yan, and J. Ran. 2020. “Adsorption materials for volatile organic compounds (VOCs) and the key factors for VOCs adsorption process: A review.” Sep. Purif. Technol. 235 (Aug): 116213. https://doi.org/10.1016/j.seppur.2019.116213.
Liu, G., and C. J. Glover. 2015. “A study on the oxidation kinetics of warm mix asphalt.” Chem. Eng. J. 280 (Jun): 115–120. https://doi.org/10.1016/j.cej.2015.05.074.
Liu, J., B. Yu, and Q. Hong. 2020. “Molecular dynamics simulation of distribution and adhesion of asphalt components on steel slag.” Constr. Build. Mater. 255 (Aug): 119332. https://doi.org/10.1016/j.conbuildmat.2020.119332.
Morozov, V. A., D. S. Starov, N. M. Shakhova, and V. S. Kolobkov. 2004. “Production of paving asphalts from high-wax crude oils.” Chem. Technol. Fuels Oils 40: 382–388. https://doi.org/10.1007/s10553-005-0005-8.
Pasquarelli, C. H., and D. T. Wasan. 1981. The effect of film-forming materials on the dynamic interfacial properties in crude oil-aqueous systems. Berlin: Springer.
Patterson, B. A., M. H. Malakooti, J. Lin, A. Okorom, and H. A. Sodano. 2018. “Aramid nanofibers for multiscale fiber reinforcement of polymer composites.” Compos. Sci. Technol. 161 (Jun): 92–99. https://doi.org/10.1016/j.compscitech.2018.04.005.
Pei, X., W. Fan, Y. Liu, C. Qian, Y. Wang, Y. Jiang, S. Chen, Z. Wang, and L. Han. 2020. “The effect of oil sands de-oiled asphalt on rheological properties, compatibility and stability of asphalt binder.” Constr. Build. Mater. 263 (Jun): 120594. https://doi.org/10.1016/j.conbuildmat.2020.120594.
Plata-Gryl, M., M. Momotko, S. Makowiec, and G. Boczkaj. 2021. “Characterization of diatomaceous earth coated with nitrated asphaltenes as superior adsorbent for removal of VOCs from gas phase in fixed bed column.” Chem. Eng. J. 427 (6): 130653. https://doi.org/10.1016/j.cej.2021.130653.
Ryu, J. H., P. B. Messersmith, and H. Lee. 2018. “Polydopamine surface chemistry—A decade of discovery.” ACS. Appl. Mater. Interf. 10: 7523–7540. https://doi.org/10.1021/acsami.7b19865.
Sa, R., Y. Yan, Z. Wei, L. Zhang, W. Wang, and M. Tian. 2014. “Surface modification of aramid fibers by bio-inspired poly(dopamine) and epoxy functionalized silane grafting.” Appl. Mater. Interfaces 6 (23): 21730–21738. https://doi.org/10.1021/am507087p.
Scott, J. 1978. “Adhesion and disbonding mechanisms of asphalt used in highway construction and maintenance.” Assoc. Asphalt Pav. Technol. Proc 47: 19–48.
Serfass, J. P., and J. Samanos. 1996. “Fiber-modified asphalt concrete characteristics, applications and behavior.” Asph. Pav. Technol. 65: 193–230.
Sheena, Y., T. Hema, M. Varghese, and C. Yohannan. 2008. “Vibrational spectroscopic studies and ab initio calculations of 5-nitro-2-(p-fluorophenyl) benzoxazole.” Spectrochim. Acta A Mol. Biomol. Spectrosc. 69 (3): 782–788.
Soares, C. J., F. R. Santana, J. C. Pereira, T. S. Araujo, and M. S. Menezes. 2008. “Influence of airborne-particle abrasion on mechanical properties and bond strength of carbon/epoxy and glass/bis-gma fiber-reinforced resin posts.” J. Prosthet Dent. 99 (6): 444–454.
Su, Z., Y. Muhammad, M. Sahibzada, J. Li, F. Meng, Y. Wei, Z. Zhao, and L. Zhang. 2019. “Preparation and properties of aminated graphene fiber incorporated modified asphalt.” Constr. Build. Mater. 229 (Jun): 116836. https://doi.org/10.1016/j.conbuildmat.2019.116836.
Sugano, M., J. Kajita, M. Ochiai, N. Takagi, S. Iwai, and K. Hirano. 2011. “Mechanisms for chemical reactivity of two kinds of polymer modified asphalts during thermal degradation.” Chem. Eng. J. 176 (Nov): 231–236. https://doi.org/10.1016/j.cej.2011.08.080.
Topacli, C., and A. Topacli. 2003. “Ab initio calculations and vibrational structure of sulfanilamide.” J. Mol. Struct. 644 (1): 145–150. https://doi.org/10.1016/S0022-2860(02)00473-8.
Wang, X., W. Xing, X. Feng, B. Yu, L. Song, G. H. Yeoh, and Y. Hu. 2016. “Enhanced mechanical and barrier properties of polyurethane nanocomposite films with randomly distributed molybdenum disulfide nanosheets.” Compos. Sci. Technol. 127 (18): 142–148. https://doi.org/10.1016/j.compscitech.2016.02.029.
Wang, Y., and K. Zhao. 2016. “Different forms of asphaltene microstructures discovered in transmission electron microscopy.” J. Mater. Civ. Eng. 28 (11): 04016137. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001660.
Yang, G., M. Park, and S. J. Park. 2019. “Recent progresses of fabrication and characterization of fibers-reinforced composites: A review.” Compos. Commun. 14 (Aug): 34–42. https://doi.org/10.1016/j.coco.2019.05.004.
Yaseen, M., S. Subhan, K. Khan, M. U. Farooq, W. Ahmad, H. Seema, R. Naz, and F. Subhan. 2022. “Deep desulfurization of real fuel oils over tin-impregnated graphene oxide-hydrogen peroxide and formic acid catalyst-oxidant system.” J. Sulfur Chem. 2022 (1): 1–16. https://doi.org/10.1080/17415993.2022.2131429.
Zenkevich, I. G., and A. I. Ukolov. 2011. “Features of the chromatography-mass spectrometric identification of condensation products of the carbonyl compounds.” Russ. J. Gen. Chem. 81 (9): 1818–1828. https://doi.org/10.1134/S1070363211090143.
Zhang, B., L. Jia, M. Tian, N. Ning, and W. Wang. 2021. “Surface and interface modification of aramid fiber and its reinforcement for polymer composites: A review.” Eur. Polym. J. 147 (21): 110352. https://doi.org/10.1016/j.eurpolymj.2021.110352.
Zhang, G., Y. Liu, S. Zheng, and Z. Hashisho. 2019. “Adsorption of volatile organic compounds onto natural porous minerals.” J. Hazard. Mater. 364 (Feb): 317–324. https://doi.org/10.1016/j.jhazmat.2018.10.031.
Zhang, T., Y. Ma, and L. Qi. 2013. “Bioinspired colloidal materials with special optical, mechanical, and cell-mimetic functions.” J. Mater. Chem. B 1 (3): 251–264. https://doi.org/10.1039/C2TB00175F.
Zhu, Z., Y. Liu, Y. Muhammad, W. Lu, Z. Zhao, and J. Li. 2021. “Study on the modified fiber with nacre layer structure based on bionic coating and molybdenum disulfide co-construction incorporated asphalt.” Polym. Compos. 42 (10): 5374–5387. https://doi.org/10.1002/pc.26230.
Zhu, Z., Y. Liu, S. Subhan, L. Ma, Z. Zhao, and J. Li. 2022. “Boosting the mechanical and fracture resistance of asphalt via biomimetic poly dopamine-octadecylamine aramid fiber interface.” J. Appl. Polym. Sci. 139 (2): 51468. https://doi.org/10.1002/app.51468.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 35 • Issue 10 • October 2023
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Nov 1, 2022
Accepted: Mar 15, 2023
Published online: Jul 26, 2023
Published in print: Oct 1, 2023
Discussion open until: Dec 26, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.