Subgrade Strength Performance Behavior of Alkali-Activated Binder and Cement Stabilized Expansive Soil: A Semifield Study
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 10
Abstract
Expansive subgrade soil possesses a dual nature of swelling and shrinkage, resulting in a premature failure on pavement surfaces. In the present investigation, an effort has been made to compare the field performance of expansive subgrade soil stabilized with cement and an alkali-activated binder (AAB). A 12-m-long semifield test section with cement, AAB treated, and untreated expansive soil as a subgrade was constructed to evaluate the strength properties. The AAB was produced by combining dry pozzolanic precursors (steel slag and fly ash) with an activator solution (sodium silicate and sodium hydroxide) in a ratio. The in situ subgrade strength behavior was evaluated by embedding a series of stress meters and strain gauges in the subgrade layer and applying a load through a dual wheel truck load (12-t rear axle load) on the test section. The influences of AAB, curing time, and steel slag/fly ash proportion in alkaline soil mixture on microstructural and geomechanical properties of soil were analyzed on samples collected from the field section. It is observed that the AAB treated subgrade layers achieved higher geomechanical strength than cement treated and untreated layers. The combined inclusion of slag-fly ash in the AAB mixture increases the subgrade strength by 23%–26% compared to cement treated soil. The recommendations for practical implementation of AAB stabilization for expansive soils as a subgrade are provided based on the semifield test section studies.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data and material that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors would like to express their sincere gratitude to the Student Activity Center (SAC) and Central Analytical Laboratory (CAL) at BITS-Pilani, Hyderabad Campus, for providing the mini road roller and carrying out the microstructural investigations, and Innovative Geotechnical Instrument, Lucknow, for supplying the readout unit at the field track.
References
AS (Australian Standard). 2008. Methods of testing soils for engineering purposes—Soil classification tests—Determination of the linear shrinkage of a soil—Standard method. AS-1289.34.1. Sydney, NSW, Australia: AS.
Ashfaq, M., A. A. Baig Moghal, B. Munwar Basha, and A. A. Baig Moghal. 2021. “Carbon footprint analysis on the expansive soil stabilization techniques.” In Proc., IFCEE 2021, 213–222. Reston, VA: ASCE.
ASTM. 2006. Standard test method for unconfined compressive strength of cohesive soil. ASTM D2166. West Conshohocken, PA: ASTM.
ASTM. 2016. Standard test method for California bearing ratio (CBR) of laboratory-compacted soils. ASTM D1883. West Conshohocken, PA: ASTM.
ASTM. 2017. Standard test methods for liquid limit, plastic limit, and plasticity index of soils. ASTM D4318. West Conshohocken, PA: ASTM.
ASTM. 2019. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete. ASTM C618-17a. West Conshohocken, PA: ASTM.
ASTM. 2021. Standard test methods for laboratory compaction characteristics of soil using standard effort [12,400 ft-lbf/ft3 (600 kN-m/m3)]. ASTM D698. West Conshohocken, PA: ASTM.
BIS (Bureau of Indian Standards). 1997. Methods of test for soils. Part 40: Determination of free swell index of soils. IS:2720 (Part-40). New Delhi, India: BIS.
Corrêa-Silva, M., N. Araújo, N. Cristelo, T. Miranda, A. T. Gomes, and J. Coelho. 2018. “Improvement of a clayey soil with alkali activated low-calcium fly ash for transport infrastructures applications.” Road Mater. Pavement Des. 20 (8): 1912–1926. https://doi.org/10.1080/14680629.2018.1473286.
Gartner, E. 2004. “Industrially interesting approaches to ‘low-’ cements.” Cem. Concr. Res. 34 (9): 1489–1498. https://doi.org/10.1016/j.cemconres.2004.01.021.
Kang, X., G.-C. Kang, K.-T. Chang, and L. Ge. 2015. “Chemically stabilized soft clays for road-base construction.” J. Mater. Civ. Eng. 27 (7): 1–9. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001156.
Kar, A. 2013. Characterizations of concretes with alkali-activated binder and correlating their properties from micro-to-specimen level. Morgantown, WV: West Virginia Univ.
Kiran, R. K. 2021. “Evaluation of high-temperature, bond, and shrinkage characteristics of alkali-activated binder concrete.” Ph.D. thesis, Dept. of Civil Engineering, Birla Institute of Technology and Science (BITS)–Pilani Hyderabad Campus, Hyderabad, India.
Latifi, N., F. Vahedifard, E. Ghazanfari, S. Horpibulsuk, A. Marto, and J. Williams. 2017. “Sustainable improvement of clays using low-carbon nontraditional additive.” Int. J. Geomech. 18 (3): 04017162. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001086.
Leong, H. Y., D. E. L. Ong, J. G. Sanjayan, and A. Nazari. 2016. “The effect of different Na2O and K2O ratios of alkali activator on compressive strength of fly ash based-geopolymer.” Constr. Build. Mater. 106 (Mar): 500–511. https://doi.org/10.1016/j.conbuildmat.2015.12.141.
Moghal, A. A. B., B. C. S. Chittoori, and B. M. Basha. 2018. “Effect of fibre reinforcement on CBR behaviour of lime-blended expansive soils: Reliability approach.” Road Mater. Pavement Des. 19 (3): 690–709. https://doi.org/10.1080/14680629.2016.1272479.
Mohammadinia, A., A. Arulrajah, J. Sanjayan, M. M. Disfani, M. Win Bo, and S. Darmawan. 2016. “Stabilization of demolition materials for pavement base/subbase applications using fly ash and slag geopolymers: Laboratory investigation.” J. Mater. Civ. Eng. 28 (7): 04016033. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001526.
Mubaraki, M. 2018. “Improving road construction on sabkha soil by using lime stabilization and groundwater table monitoring.” J. Test. Eval. 47 (3): 14. https://doi.org/10.1520/JTE20180273.
Pacheco-Torgal, F., J. Castro-Gomes, and S. Jalali. 2008. “Alkali-activated binders: A review. Part 2. About materials and binders manufacture.” Constr. Build. Mater. 22 (7): 1315–1322. https://doi.org/10.1016/j.conbuildmat.2007.03.019.
Phanikumar, B. R., and R. Singla. 2016. “Swell-consolidation characteristics of fibre-reinforced expansive soils.” Soils Found. 56 (1): 138–143. https://doi.org/10.1016/j.sandf.2016.01.011.
Phetchuay, C., S. Horpibulsuk, A. Arulrajah, C. Suksiripattanapong, and A. Udomchai. 2016. “Strength development in soft marine clay stabilized by fly ash and calcium carbide residue based geopolymer.” Appl. Clay Sci. 127–128 (Jul): 134–142. https://doi.org/10.1016/j.clay.2016.04.005.
Pourakbar, S., A. Asadi, B. B. K. Huat, and M. H. Fasihnikoutalab. 2015. “Soil stabilisation with alkali-activated agro-waste.” Environ. Geotech. 2 (6): 359–370. https://doi.org/10.1680/envgeo.15.00009.
Rios, S., N. Cristelo, A. Viana da Fonseca, and C. Ferreira. 2016. “Structural performance of alkali-activated soil ash versus soil cement.” J. Mater. Civ. Eng. 28 (2): 04015125. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001398.
Robayo-Salazar, R., J. Mejía-Arcila, R. Mejía de Gutiérrez, and E. Martínez. 2018. “Life cycle assessment of an alkali-activated binary concrete based on natural volcanic pozzolan: A comparative analysis to OPC concrete.” Constr. Build. Mater. 176 (Jul): 103–111. https://doi.org/10.1016/j.conbuildmat.2018.05.017.
Saride, S., and T. T. Dutta. 2016. “Effect of fly-ash stabilization on stiffness modulus degradation of expansive clays.” J. Mater. Civ. Eng. 28 (12): 04016166. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001678.
Sharma, A. K., and P. V. Sivapullaiah. 2017. “Swelling behaviour of expansive soil treated with fly ash–GGBS based binder.” Geomech. Geoeng. 12 (3): 191–200. https://doi.org/10.1080/17486025.2016.1215548.
Sridharan, A., A. Sreepada Rao, and P. V. Sivapullaiah. 1986. “Swelling pressure of clays.” Geotech. Test. J. 9 (1): 24–33. https://doi.org/10.1520/GTJ10608J.
Syed, M., A. GuhaRay, and A. Garg. 2021. “Performance evaluation of lime, cement and alkali-activated binder in fiber-reinforced expansive subgrade soil: A comparative study.” J. Test. Eval. 51 (1). https://doi.org/10.1520/JTE20210054.
Syed, M., A. GuhaRay, and A. Kar. 2020. “Stabilization of expansive clayey soil with alkali activated binders.” Geotech. Geol. Eng. 9 (1): 1–21.
Tang, C.-S., D.-Y. Wang, Y.-J. Cui, B. Shi, and J. Li. 2016. “Tensile strength of fiber-reinforced soil.” J. Mater. Civ. Eng. 28 (7): 04016031. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001546.
Turner, L. K., and F. G. Collins. 2013. “Carbon dioxide equivalent (-e) emissions: A comparison between geopolymer and OPC cement concrete.” Constr. Build. Mater. 43 (Jun): 125–130. https://doi.org/10.1016/j.conbuildmat.2013.01.023.
Xia, W.-Y., Y.-S. Feng, Y.-J. Du, K. R. Reddy, and M.-L. Wei. 2018. “Solidification and stabilization of heavy metal–contaminated industrial site soil using KMP binder.” J. Mater. Civ. Eng. 30 (6): 04018080. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002264.
Zhang, M., H. Guo, T. El-Korchi, G. Zhang, and M. Tao. 2013. “Experimental feasibility study of geopolymer as the next-generation soil stabilizer.” Constr. Build. Mater. 47 (Oct): 1468–1478. https://doi.org/10.1016/j.conbuildmat.2013.06.017.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Sep 7, 2022
Accepted: Mar 1, 2023
Published online: Jul 18, 2023
Published in print: Oct 1, 2023
Discussion open until: Dec 18, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.