Statistical Modeling of Pore Structures in Fresh Cement Paste Based on Dispersion Theory of Random Two-Phase Media
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 9
Abstract
Pore structures are critical for most properties of cementitious materials. To describe the initial pore structure of fresh cement paste, which is the foundation of the evolution of a pore network induced by hydration of cement particles in hardened concrete, statistical modelling of pore structure is carried out based on a concentric-shell sphere model, by taking cement paste as a random two-phase media. Calculations by the dispersion models agree well with the pore size distributions tested by the low-field nuclear magnetic resonance (NMR) technique. For cement paste that disperses completely with the help of a dispersant, a hard sphere model is practical. However, in most real conditions, an agglomeration of cement particles will occur both before and after mixing with water, which can be characterized by the redistribution of pore size determined by the critical grain size and the hardness parameter in the concentric-shell model, respectively. Calculation results suggest that agglomeration of particles leads to coarser pores. This work will promote the understanding of the formation mechanisms of pore networks and further offers a foundation for modelling the evolution of pore structures in cementitious materials.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This work was supported by the National Natural Science Foundations of China (Nos. 51308334 and 51479113), which is gratefully acknowledged.
References
Alonso, M., E. Sainz, F. A. Lopez, and K. Shinohara. 1995. “Void-size probability distribution in random packings of equal-sized spheres.” Chem. Eng. Sci. 50 (12): 1983–1988. https://doi.org/10.1016/0009-2509(95)00061-9.
Bentz, D. P. 1997. “Three-dimensional computer simulation of portland cement hydration and microstructure development.” J. Am. Ceram. Soc. 80 (1): 3–21. https://doi.org/10.1111/j.1151-2916.1997.tb02785.x.
Bishnoi, S., and K. L. Scrivener. 2009. “μic: A new platform for modelling the hydration of cements.” Cem. Concr. Res. 39 (4): 266–274. https://doi.org/10.1016/j.cemconres.2008.12.002.
Breugel, K. V. 1995. “Numerical simulation of hydration and microstructural development in hardening cements-based materials: (II) Applications.” Cem. Concr. Res. 25 (3): 522–530. https://doi.org/10.1016/0008-8846(95)00041-A.
Brownstein, K. R., and C. E. Tarr. 1977. “Spin-lattice relaxation in a system governed by diffusion.” J. Magn. Reson. 26 (1): 17–24. https://doi.org/10.1016/0022-2364(77)90230-X.
Chiew, Y. C., and E. Glandt. 1984. “Interfacial surface area in dispersions and porous media.” J. Colloid Interface Sci. 99 (1): 86–96. https://doi.org/10.1016/0021-9797(84)90088-2.
Chindaprasirt, P., S. Homwuttiwong, and V. Sirivivatnanon. 2004. “Influence of fly ash fineness on strength, drying shrinkage and sulfate resistance of blended cement mortar.” Cem. Concr. Res. 34 (7): 1087–1092. https://doi.org/10.1016/j.cemconres.2003.11.021.
Dodds, J. A., and P. J. Lloyd. 1972. “A model for the void structure in multi-component sphere packs applied to capillary pressure curves.” Powder Technol. 5 (2): 69–76. https://doi.org/10.1016/0032-5910(72)80002-0.
Hou, D., D. Li, P. Hua, J. Jiang, and G. Zhang. 2019. “Statistical modelling of compressive strength controlled by porosity and pore size distribution for cementitious materials.” Cem. Concr. Compos. 96 (Feb): 11–20. https://doi.org/10.1016/j.cemconcomp.2018.10.012.
Hwang, C. L., A. Le, and C. T. Chen. 2012. “Application of Fuller’s ideal curve and error function to making high performance concrete using rice husk ash.” Comput. Concr. 10 (6): 631–647. https://doi.org/10.12989/cac.2012.10.6.631.
Jennings, H. M., J. J. Thomas, J. S. Gevrenov, G. Constantinides, and F.-J. Ulm. 2007. “A multi-technique investigation of the nanoporosity of cement paste.” Cem. Concr. Res. 37 (3): 329–336. https://doi.org/10.1016/j.cemconres.2006.03.021.
Lu, B., and S. Torquato. 1992. “Nearest-surface distribution functions for polydispersed particle systems.” Phys. Rev. A: At. Mol. Opt. Phys. 45 (8): 5530. https://doi.org/10.1103/PhysRevA.45.5530.
Merkus, H. G. 2009. “Particle size measurements: Fundamentals, practice, quality.” In Particle size measurements fundamentals, 14–44. Dordrecht: Springer Science.
Monteilhet, L., J.-P. Korb, J. Mitchell, and P. J. McDonald. 2006. “Observation of exchange of micropore water in cement pastes by two-dimensional nuclear magnetic resonance relaxometry.” Phys. Rev. E: Stat. Nonlinear Soft Matter Phys. 74 (6 Pt 1): 061404. https://doi.org/10.1103/PhysRevE.74.061404.
Muller, A., K. L. Scrivener, A. M. Gajewicz, and P. J. McDonald. 2013. “Densification of C-S-H measured by 1H NMR relaxometry.” J. Phys. Chem. C 117 (1): 403–412. https://doi.org/10.1021/jp3102964.
Rikvold, P. A., and G. Stell. 1985. “D-dimensional interpenetrable-sphere models of random two-phase media: Microstructure and an application to chromatography.” J. Colloid Interface Sci. 108 (1): 158–173. https://doi.org/10.1016/0021-9797(85)90246-2.
Slanička, Š. 1991. “The influence of fly ash fineness on the strength of concrete.” Cem. Concr. Res. 21 (2–3): 285–296. https://doi.org/10.1016/0008-8846(91)90010-F.
Thomas, J. J., J. J. Biernacki, J. W. Bullard, S. Bishnoi, J. S. Dolado, G. W. Scherer, and A. Luttge. 2011. “Modeling and simulation of cement hydration kinetics and microstructure development.” Cem. Concr. Res. 41 (12): 1257–1278. https://doi.org/10.1016/j.cemconres.2010.10.004.
Torquato, S. 2002. Random heterogeneous materials. Dordrecht: Springer Science.
Torquato, S., and F. H. Stillinger. 2003. “Local density fluctuations, hyperuniformity, and order metrics.” Phys. Rev. E: Stat. Nonlinear Soft Matter Phys. 68 (4 Pt 1): 041113. https://doi.org/10.1103/PhysRevE.68.041113.
Tsakiroglou, C. D., and A. C. Payatakes. 1990. “A new simulator of mercury porosimetry for the characterization of porous materials.” J. Colloid Interface Sci. 137 (2): 315–339. https://doi.org/10.1016/0021-9797(90)90409-H.
Venkataramanan, L., Y.-Q. Song, and M. D. Hürlimann. 2002. “Solving Fredholm integrals of the first kind with tensor product structure in 2 and 2.5 dimensions.” IEEE Trans. Signal Process. 50 (5): 1017–1026. https://doi.org/10.1109/78.995059.
Yu, A. B., and N. Standish. 1991. “Estimation of the porosity of particle mixtures by a linear-mixture packing model.” Ind. Eng. Chem. Res. 30 (6): 1372–1385. https://doi.org/10.1021/ie00054a045.
Zhang, J., J. Qiu, J. Shen, M. Zhang, H. Ji, and R. Yang. 2022. “On the early behavior and microstructure of oil well cement paste incorporating with carbon nanotubes cured at a high temperature.” Constr. Build. Mater. 317 (Jan): 125670. https://doi.org/10.1016/j.conbuildmat.2021.125670.
Zhang, M., J. Shen, R. Yang, H. Ji, and J. Ding. 2021. “Effect of curing age on the microstructure and hydration behavior of oil well cement paste cured at high temperature.” J. Mater. Civ. Eng. 33 (3): 04021006. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003624.
Zingg, A., L. Holzer, A. Kaech, F. Winnefeld, J. Pakusch, S. Becker, and L. Gauckler. 2008. “The microstructure of dispersed and non-dispersed fresh cement pastes—New insight by cryo-microscopy.” Cem. Concr. Res. 38 (4): 522–529. https://doi.org/10.1016/j.conbuildmat.2021.125670.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Aug 22, 2022
Accepted: Feb 1, 2023
Published online: Jun 19, 2023
Published in print: Sep 1, 2023
Discussion open until: Nov 19, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.