Multiscale Enhancement Mechanisms of EVA on EPS-Cement Composites
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 5
Abstract
Ethylene-vinyl acetate (EVA) lotion can significantly improve the interface problems caused by the physical and chemical differences between expanded polystyrene (EPS) beads and cement, which is one of the reasons why EPS cement composites are widely used in the construction field. However, the research on its problems is often limited to phenomenological engineering methods, ignoring the potential interaction mechanism in atomic structure. Therefore, in this study, the strengthening mechanism of EVA on EPS particle–cement slurry interface was systematically studied from the aspects of macromechanical properties, microstructure characteristics, chemical composition, and molecular structure. In terms of physical test, it was found that the compressive strength and flexural strength of EPS-cement-based materials containing EVA are increased by 19% and 31%, respectively, at 28 days when the content of EPS particles is the same. It was observed through an electron microscope snapshot that EVA makes a uniform and dense interface structure between EPS particles and cement. For chemical tests, EPS particle surface hardening cement was ground into powder and tested by X-ray diffraction and Fourier transform infrared spectrometer. It was comprehensively analyzed that EVA reduced the hydration product and increased calcium silicate hydrate (C-S-H) at the interface. In terms of numerical simulation, through molecular simulation modeling and calculation, it was found that the introduction of EVA can produce more stable hydrogen and ion bonds at the EPS–C-S-H interface, which plays a vital role in reducing the interface effect and increasing the interface binding energy.
Practical Applications
Cement-based materials containing expanded polystyrene beads are considered environmentally friendly, lightweight, and high-strength green building materials widely used in construction projects, such as load-bearing concrete blocks, insulation boards or walls, cladding or structural insulation panels, composite floors, structural insulated panel, pavement base material, geogrid, road barrier, and floating offshore structure. These structures have the advantages of good durability, good thermal insulation, high fire rating, low water absorption, low price, and convenient construction. In order to promote its application in practical engineering, it is necessary to solve the problems of poor adhesion of EPS/cement-based interface and uneven separation and dispersion of EPS particles in EPS cement-based composites. As an effective method, the surface modification of EPS is worth studying. This study discussed the strengthening mechanism of EPS/cement-based interface modified by ethylene-vinyl acetate lotion from multiscale by experiment and numerical simulation. It can provide a reference for preparing more stable, uniform and excellent EPS concrete.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
No data, models, or code were generated or used during the study.
Acknowledgments
This work was financially supported by the Innovative Funds Plan of Henan University of Technology (2020ZKCJ21), Zhengzhou Collaborative Innovation Project (21ZZXTCX09), and the Cultivation Plan for Youth Backbone Teachers of Institution of Higher Vocational School by Henan Province (2019GZGG070).
References
Alkhateb, H., A. Al-Ostaz, A. Cheng, and X. Li. 2013. “Materials genome for graphene-cement nanocomposites.” J. Nanomech. Micromech. 3 (3): 67–77. https://doi.org/10.1061/(ASCE)NM.2153-5477.0000055.
Assaad, J. J., and A. El Mir. 2020. “Durability of polymer-modified lightweight flowable concrete made using expanded polystyrene.” Constr. Build. Mater. 249 (Jul): 118764. https://doi.org/10.1016/j.conbuildmat.2020.118764.
Babavalian, A., A. Ranjbaran, and S. Shahbeyk. 2020. “Uniaxial and triaxial failure strength of fiber reinforced EPS concrete.” Constr. Build. Mater. 247 (Jun): 118617. https://doi.org/10.1016/j.conbuildmat.2020.118617.
Bakhshi, M., and S. Shahbeyk. 2019. “Experimental and microstructural study of the compressive strength of concrete samples containing low volumes of expanded polystyrene beads.” Struct. Concr. 20 (4): 1379–1390. https://doi.org/10.1002/suco.201800317.
Chen, B., and J. Liu. 2007. “Mechanical properties of polymer-modified concretes containing expanded polystyrene beads.” Constr. Build. Mater. 21 (1): 7–11. https://doi.org/10.1016/j.conbuildmat.2005.08.001.
Chen, S., Z. Ren, Z. Tang, and X. Zhuo. 2021. “Long-term prediction of weather for analysis of residential building energy consumption in Australia.” Energies 14 (16): 4805. https://doi.org/10.3390/en14164805.
Cho, B., W. Chung, and B. Nam. 2020. “Molecular dynamics simulation of calcium-silicate-hydrate for nano-engineered cement composites: A review.” Nanomaterials (Basel) 10 (11): 2158. https://doi.org/10.3390/nano10112158.
Cong, X., R. J. Kirkpatrick, and S. Diamond. 1993. “29Si MAS NMR spectroscopic investigation of alkali silica reaction product gels.” Cem. Concr. Res. 23 (4): 811–823. https://doi.org/10.1016/0008-8846(93)90035-8.
CS (Chinese Standard). 2019. Standard for test methods of concrete physical and mechanical properties. GB/T 50081-2019. Beijing: China Architecture Press.
Dong, J., J. Cao, Y. Li, Y. Zhou, and L. Wang. 2019. “Interfacial modification of EPS cement based composite materials.” J. Build. Mater. 22 (6): 917–921. https://doi.org/110.3969/j.issn.1007-9629.2019.06.012.
Du, J., Y. Bu, and Z. Shen. 2018. “Interfacial properties and nanostructural characteristics of epoxy resin in cement matrix.” Constr. Build. Mater. 164 (Mar): 103–112. https://doi.org/10.1016/j.conbuildmat.2017.12.200.
Fan, D., and S. Yang. 2018. “Mechanical properties of C-S-H globules and interfaces by molecular dynamics simulation.” Constr. Build. Mater. 176 (Jul): 573–582. https://doi.org/10.1016/j.conbuildmat.2018.05.085.
Fathi, M., A. Yousefipour, and E. Farokhy. 2017. “Mechanical and physical properties of expanded polystyrene structural concretes containing micro-silica and nano-silica.” Constr. Build. Mater. 136 (Apr): 590–597. https://doi.org/10.1016/j.conbuildmat.2017.01.040.
Feng, Y., D. Qin, L. Li, Y. Li, C. Wang, and P. Wang. 2021. “EVA enhances the interfacial strength of EPS concrete: A molecular dynamics study.” J. Exp. Nanosci. 16 (1): 382–396. https://doi.org/10.1080/17458080.2021.2003338.
Grujicic, M., Y. Sun, and K. Koudela. 2007. “The effect of covalent functionalization of carbon nanotube reinforcements on the atomic-level mechanical properties of poly-vinyl-ester-epoxy.” Appl. Surf. Sci. 253 (6): 3009–3021. https://doi.org/10.1016/j.apsusc.2006.06.050.
Guo, F., J. Zhang, J. Pei, B. Zhou, A. Falchetto, and Z. Hu. 2020. “Investigating the interaction behavior between asphalt binder and rubber in rubber asphalt by molecular dynamics simulation.” Constr. Build. Mater. 252 (Aug): 118956. https://doi.org/10.1016/j.conbuildmat.2020.118956.
Hamid, S. 1981. “The crystal structure of the 11 natural tobermorite Ca2.25[Si3O7.5(OH)1.5] 1H2O.” Z. Kristallogr. - Cryst. Mater. 154 (1–4): 189–198. https://doi.org/1010.1524/zkri.1981.154.14.18.
Han, Q., Y. Yang, J. Zhang, J. Yu, D. Hou, B. Dong, and H. Ma. 2020. “Insights into the interfacial strengthening mechanism of waste rubber/cement paste using polyvinyl alcohol: Experimental and molecular dynamics study.” Cem. Concr. Compos. 114 (Nov): 103791. https://doi.org/10.1016/j.cemconcomp.2020.103791.
Horma, O., M. Charai, S. EI Hassani, A. EI Hammouti, M. A. Moussaoui, and A. Mezrhab. 2022. “Thermal performance study of a cement-based mortar incorporating EPS beads.” Front. Built Environ. 8 (May): 88294. https://doi.org/10.3389/fbuil.2022.882942.
Hou, D., T. Li, and P. Wang. 2018. “Molecular dynamics study on the structure and dynamics of NaCl solution transport in the nanometer channel of CASH gel.” ACS Sustainable Chem. Eng. 6 (7): 9498–9509. https://doi.org/10.1021/acssuschemeng.8b02126.
Hou, D., J. Yu, and P. Wang. 2019. “Molecular dynamics modeling of the structure, dynamics, energetics and mechanical properties of cement-polymer nanocomposite.” Composites, Part B 162 (Apr): 433–444. https://doi.org/10.1016/j.compositesb.2018.12.142.
Hu, K., C. Yu, Q. Yang, Y. Chen, G. Chen, and R. Ma. 2021. “Multi–scale enhancement mechanisms of graphene oxide on styrene–butadiene–styrene modified asphalt: An exploration from molecular dynamics simulations.” Mater. Des. 208 (Oct): 109901. https://doi.org/10.1016/j.matdes.2021.109901.
Ilango, N., P. Gujar, A. Nagesh, A. Alex, and P. Ghosh. 2021. “Interfacial adhesion mechanism between organic polymer coating and hydrating cement paste.” Cem. Concr. Compos. 115 (Jan): 103856. https://doi.org/10.1016/j.cemconcomp.2020.103856.
Ji, K., and C. Arson. 2020. “Tensile strength of calcite/HMWM and silica/HMWM interfaces: A molecular dynamics analysis.” Constr. Build. Mater. 251 (Aug): 118925. https://doi.org/10.1016/j.conbuildmat.2020.118925.
Kalua, A. 2020. “Urban residential building energy consumption by end-use in Malawi.” Buildings 10 (2): 31. https://doi.org/10.3390/buildings10020031.
Kaya, A., and F. Kar. 2016. “Properties of concrete containing waste expanded polystyrene and natural resin.” Constr. Build. Mater. 105 (Feb): 572–578. https://doi.org/10.1016/j.conbuildmat.2015.12.177.
Kumar, A., B. Walder, A. Mohamed, A. Hofstetter, B. Srinivasan, A. Rossini, K. Scrivener, L. Emsley, and P. Bowen. 2017. “The atomic-level structure of cementitious calcium silicate hydrate.” J. Phys. Chem. C 121 (32): 17188–17196. https://doi.org/10.1021/acs.jpcc.7b02439.
Li, C., L. Miao, Q. You, L. Lei, X. Liang, and J. Wang. 2020. “Experimental investigation on the bond behavior of deformed bars in a class of structural expanded polystyrene (EPS) concrete.” KSCE J. Civ. Eng. 24 (12): 3797–3809. https://doi.org/10.1007/s12205-020-0167-2.
Liu, N., and B. Chen. 2014. “Experimental study of the influence of EPS particle size on the mechanical properties of EPS lightweight concrete.” Constr. Build. Mater. 68 (Oct): 227–232. https://doi.org/10.1016/j.conbuildmat.2014.06.062.
Liu, Q., G. Ding, Z. Zhang, C. Fu, and M. Oeser. 2021a. “Investigation on bitumen-epoxy interface in cold mixed epoxy bitumen using experimental observation and molecular dynamics simulation.” Constr. Build. Mater. 303 (Oct): 124490. https://doi.org/10.1016/j.conbuildmat.2021.124490.
Liu, Q., J. Wu, L. Xie, Z. Zhang, X. Ma, and M. Oeser. 2021b. “Micro-scale investigation of aging gradient within bitumen film around air-binder interface.” Fuel 286 (Part 2): 119404. https://doi.org/10.1016/j.fuel.2020.119404.
Lu, Z., J. Yu, J. Yao, and D. Hou. 2020. “Experimental and molecular modeling of polyethylene fiber/cement interface strengthened by graphene oxide.” Cem. Concr. Compos. 112 (Sep): 103676. https://doi.org/10.1016/j.cemconcomp.2020.103676.
Luo, D., M. Guo, and Y. Tan. 2018. “Molecular simulation of minerals-asphalt interfacial interaction.” Minerals 8 (5): 176. https://doi.org/10.3390/min8050176.
Maghfouri, M., V. Alimohammadi, R. Gupta, M. Saberian, P. Azarsa, M. Hashemi, and R. Roychand. 2022. “Drying shrinkage properties of expanded polystyrene (EPS) lightweight aggregate concrete: A review.” Case Stud. Constr. Mater. 16 (Jun): e00919. https://doi.org/10.1016/j.cscm.2022.e00919.
Pellenq, R., A. Kushima, R. Shahsavari, K. Vliet, M. Buehler, S. Yip, and F. Ulm. 2009. “A realistic molecular model of cement hydrates.” PNAS 106 (38): 16102–16107. https://doi.org/10.1073/pnas.0902180106.
Petrella, A., R. Mundo, and M. Notarnicola. 2020. “Recycled expanded polystyrene as lightweight aggregate for environmentally sustainable cement conglomerates.” Materials (Basel) 13 (4): 988. https://doi.org/10.3390/ma13040988.
Pundienė, I., J. Pranckevičienė, M. Kligys, and O. Kizinievič. 2020. “The synergetic interaction of chemical admixtures on the properties of eco-friendly lightweight concrete from industrial technogenic waste.” Constr. Build. Mater. 256 (Sep): 119461. https://doi.org/10.1016/j.conbuildmat.2020.119461.
Qi, C., H. Manzano, D. Spagnoli, Q. Chen, and A. Fourie. 2021. “Initial hydration process of calcium silicates in portland cement: A comprehensive comparison from molecular dynamics simulations.” Cem. Concr. Res. 149 (Nov): 106576. https://doi.org/10.1016/j.cemconres.2021.106576.
Silva, D., P. Roman, and P. Gleize. 2002. “Evidences of chemical interaction between EVA and hydrating portland cement.” Cem. Concr. Res. 32 (9): 1383–1390. https://doi.org/10.1016/S0008-8846(02)00805-0.
Sun, H., P. Ren, and J. Fried. 1998. “The COMPASS force field: Parameterization and validation for phosphazenes.” Comput. Theor. Polym. Sci. 8 (1–2): 229–246. https://doi.org/10.1016/S1089-3156(98)00042-7.
Tavakoli, D., and A. Tarighat. 2016. “Molecular dynamics study on the mechanical properties of Portland cement clinker phases.” Comput. Mater. Sci. 119 (Jun): 65–73. https://doi.org/10.1016/j.commatsci.2016.03.043.
Thang, C., and H. Duc. 2020. “Effect of carbon nanotube on properties of lightweight concrete using recycled expanded polystyrene (EPS).” IOP Conf. Ser.: Mater. Sci. Eng. 869 (3): 032049. https://doi.org/10.1088/1757-899X/869/3/032049.
Tu, Y., P. Shi, D. Liu, R. Wen, Q. Yu, G. Sas, and L. Elfgren. 2022. “Mechanical properties of calcium silicate hydrate under uniaxial and biaxial strain conditions: A molecular dynamics study.” Phys. Chem. Chem. Phys. 24 (2): 1156–1166. https://doi.org/10.1039/D1CP04474E.
Tu, Y., R. Wen, Q. Yu, J. Cao, G. Sas, and L. Elfgren. 2021. “Molecular dynamics study on coupled ion transport in aluminum-doped cement-based materials.” Constr. Build. Mater. 295 (Aug): 123645. https://doi.org/10.1016/j.conbuildmat.2021.123645.
Wang, P., G. Qiao, Y. Zhang, D. Hou, J. Zhang, M. Wang, X. Wang, and X. Hu. 2020. “Molecular dynamics simulation study on interfacial shear strength between calcium-silicate-hydrate and polymer fibers.” Constr. Build. Mater. 257 (Oct): 119557. https://doi.org/10.1016/j.conbuildmat.2020.119557.
Wang, X., W. Xie, J. Ren, J. Zhu, L. Li, and F. Xing. 2021. “Interfacial binding energy between calcium-silicate-hydrates and epoxy resin: A molecular dynamics study.” Polymers (Basel) 13 (11): 1683. https://doi.org/10.3390/polym13111683.
Yu, C., K. Hu, Q. Yang, and Y. Chen. 2021. “Multi–scale observation of oxidative aging on the enhancement of high–temperature property of SBS–modified asphalt.” Constr. Build. Mater. 313 (Dec): 125478. https://doi.org/10.1016/j.conbuildmat.2021.125478.
Zhang, M., P. Hao, and Y. Li. 2021. “Interfacial adhesive property in “asphalt mixture-PMA copolymer-steel plate” system: Experimental and molecular dynamics simulation.” Constr. Build. Mater. 281 (Apr): 122529. https://doi.org/10.1016/j.conbuildmat.2021.122529.
Zhao, X., W. Tian, Y. Jiang, and M. Zhou. 2010. “Properties and microstructures of EPS lightweight concrete modified with EVA.” J. Build. Mater. 13 (2): 243–246. https://doi.org/10.3969/j.issn.1007-9629.2010.02.022.
Zhou, Y., J. Huang, X. Yang, Y. Dong, T. Feng, and J. Liu. 2021. “Enhancing the PVA fiber-matrix interface properties in ultra high performance concrete: An experimental and molecular dynamics study.” Constr. Build. Mater. 285 (May): 122862. https://doi.org/10.1016/j.conbuildmat.2021.122862.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 35 • Issue 5 • May 2023
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jun 28, 2022
Accepted: Sep 15, 2022
Published online: Mar 2, 2023
Published in print: May 1, 2023
Discussion open until: Aug 2, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.