Suitability Assessment Constraints of Potential Aggregate Resources Using an Integrated GIS Approach
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 9
Abstract
The commercial use of aggregate is ubiquitous in the construction of buildings and roads because aggregates provide strength, resistance, and support. This paper analyzes the constraints of aggregate rock use in Kurram district, Northwest Pakistan, and to demarcate aggregate resource locations using GIS techniques, weighted overlay analysis, and the analytic hierarchy process (AHP). The undertaken study has considered several appropriate socioeconomic and environmental factors such as land use, distance from highways, rock type, elevation, and slope to diminish conflicts between land users. These variables were mapped using the weighted overlay analysis and the AHP analysis and then ranked in order of importance. The geographical relationships between all thematic data were used to generate the final suitability map of weighted overlay analysis and AHP analysis. The enumerated results have depicted that a number of aggregate prospective areas are prevalent in the study area. The research areas have been classified as low, moderate, or highly suitable based on environmental constraints, transportation network availability, current land use, and mineral-deposit availability. Furthermore, an accuracy comparison between AHP and weighted overlay analysis revealed that AHP analysis has a very high level of precision. As a consequence, the AHP-GIS approach is highly recommended for investigating land resources and resource categorization, which assists policymakers and regional authorities in making decisions and approving quarry authorizations.
Practical Applications
The purpose of this research is to analyze aggregate resources using GIS techniques. The authors defined the aggregate resources using two different approaches: weighted overlay analysis and the analytic hierarchy process (AHP). The criteria for selecting the quarry site were developed and implemented in a GIS environment. These criteria consider a variety of factors, including the slope, the distance to the road, land use and land cover, accessibility, slope, elevation, and geology. The final suitability maps were generated, and the locations were classified into three parts: low, medium, and high. Operators and decision-makers can use the undertaken analysis as a reference to create an appropriate aggregate plan for spatial development and management. This will make it easier to ensure that aggregate resources are accessible to both present and future generations while balancing extraction activities with an environmentally friendly perspective.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request. List items: Geological shape files and Geotechnical Methodology.
Acknowledgments
The authors gratefully acknowledge the financial support from the National Natural Science Foundation of China (No. 42177166). The authors are also very thankful to Dr. H. M. Herath, Dr. M. Shoaib, Dr. Syed Muhammad Iqbal, Dr. Wajid Ali, and Syed Irshad Hussain for their review and valuable suggestions in this article.
Author contributions: The paper is to be attributed in equal parts to the authors. The contribution is the result of the joint work of the authors. In particular: conceptualization, J. H., J. Z., S. A., J. H., and H. H.; methodology, J. H., J. Z., Y. I., H. H., M. A. H, S. A., and H. H.; writing—original draft preparation, J. H, J. Z, F. F, and W. A.; writing—review and editing, J. H., J. Z., H. H., F. F., S. A, Y. L. All authors have read and agreed to the published version of the manuscript.
References
Abbas, S. M. 2012. Geology and structure of the westernmost Hill Range, Sadda area, Kurram agency, Northwest Pakistan. Peshawar, Pakistan: Univ. of Peshawar.
Aigbedion, I., and S. E. Iyayi. 2007. “Environmental effect of mineral exploitation in Nigeria.” Int. J. Phys. Sci. 2 (2): 33–38. https://doi.org/10.5897/IJPS.9000228.
Akinci, H., and K. O. Demiraraslan. 2022. “Site selection for municipal solid waste landfill: Case study of Artvin, Turkey.” Environ. Eng. Geosci. 28 (3): 293–310. https://doi.org/10.2113/EEG-D-21-00057.
Akram, M. S., K. Mirza, M. Zeeshan, and I. Ali. 2019. “Correlation of tectonics with geologic lineaments interpreted from remote sensing data for Kandiah valley, Khyber-Pakhtunkhwa, Pakistan.” J. Geol. Soc. India 93 (5): 607–613. https://doi.org/10.1007/s12594-019-1224-7.
Appolloni, A., C. J. C. Jabbour, I. D’Adamo, M. Gastaldi, and D. Settembre-Blundo. 2022. “Green recovery in the mature manufacturing industry: The role of the green-circular premium and sustainability certification in innovative efforts.” Ecol. Econ. 193 (Mar): 107311. https://doi.org/10.1016/j.ecolecon.2021.107311.
Aswathanarayana, U. 2003. Mineral resources management and the environment. London: CRC Press.
Ayodele, T. R., A. S. O. Ogunjuyigbe, O. Odigie, and J. L. Munda. 2018. “A multi-criteria GIS based model for wind farm site selection using interval type-2 fuzzy analytic hierarchy process: The case study of Nigeria.” Appl. Energy 228 (Oct): 1853–1869. https://doi.org/10.1016/j.apenergy.2018.07.051.
Badshah, M. S., E. Gnos, M. Q. Jan, and M. I. Afridi. 2000. “Stratigraphic and tectonic evolution of the northwestern Indian plate and Kabul Block.” Geol. Soc. London, Spec. Publ. 170 (1): 467–476. https://doi.org/10.1144/GSL.SP.2000.170.01.25.
Barakat, A., M. El Baghdadi, and J. Rais. 2015. “A GIS-based inventory of ornamental stone and aggregate operations in the Beni-Mellal region (Morocco).” Arabian J. Sci. Eng. 40 (7): 2021–2031. https://doi.org/10.1007/s13369-015-1672-3.
Barakat, A., Z. Ouargaf, and F. Touhami. 2016. “Identification of potential areas hosting aggregate resources using GIS method: A case study of Tadla-Azilal Region, Morocco.” Environ. Earth Sci. 75 (9): 1–16. https://doi.org/10.1007/s12665-016-5613-6.
Bascetin, A. 2007. “A decision support system using analytical hierarchy process (AHP) for the optimal environmental reclamation of an open-pit mine.” Environ. Geol. 52 (4): 663–672. https://doi.org/10.1007/s00254-006-0495-7.
Bender, F., and H. A. Raza. 1995. Geology of Pakistan. Berlin: Schweizerbart’sche Verlagsbuchhandlung.
Blengini, G. A., and D. J. Shields. 2010. “Green labels and sustainability reporting: Overview of the building products supply chain in Italy.” Manage. Environ. Qual. An Int. J. 21 (4): 477–493. https://doi.org/10.1108/14777831011049115.
Bolen, W. P., and V. V. Tepordei. 2001. “Construction aggregates.” USGS 53 (6): 30–31.
Burbank, D. W., and G. D. Johnson. 1983. “The late Cenozoic chronologic and stratigraphic development of the Kashmir intermontane basin, northwestern Himalaya.” Palaeogeogr. Palaeoclimatol. Palaeoecol. 43 (3–4): 205–235. https://doi.org/10.1016/0031-0182(83)90012-3.
Clarke, K. C., S. L. McLafferty, and B. J. Tempalski. 1996. “On epidemiology and geographic information systems: A review and discussion of future directions.” Emerging Infect. Dis. 2 (2): 85. https://doi.org/10.3201/eid0202.960202.
Clinkenbeard, J. P., E. G. Brown Jr., J. Laird, and M. Nechodom. 2012. Aggregate sustainability in California. Seal Beach, CA: Southwest Concrete Pavement Association.
Dhingra, T., A. Sengar, and S. Sajith. 2022. “A fuzzy analytic hierarchy process-based analysis for prioritization of barriers to offshore wind energy.” J. Cleaner Prod. 345 (Apr): 131111. https://doi.org/10.1016/j.jclepro.2022.131111.
Dolui, S., and S. Sarkar. 2022. “Land suitability analysis for settlement concentration in fringe area of siliguri town, West Bengal (India)—A GIS-based multi-criteria decision-making approach.” In Livelihood enhancement through agriculture, tourism, and health, 349–387. Singapore: Springer.
Escavy, J. I., M. J. Herrero, F. Lopez-Acevedo, and L. Trigos. 2022. “The progressive distancing of aggregate quarries from the demand areas: Magnitude, causes, and impact on emissions in Madrid Region (1995–2018).” Resour. Policy 75 (Mar): 102506. https://doi.org/10.1016/j.resourpol.2021.102506.
Gallagher, L., and P. Peduzzi. 2019. Sand and sustainability: Finding new solutions for environmental governance of global sand resources. Geneva: United Nations Environment Programme.
Gansser, A. 1964. Geology of the Himalayas. London: Interscience.
Goepel, K. D. 2013. “BPMSG AHP Excel template with multiple inputs.” Accessed June 28, 2015. http://bpmsg.com/.
Goswami, H. M., and S. S. Li. 2022. “Superposition-based approach to generating river bathymetry: A case study.” Can. J. Civ. Eng. 49 (8): 1325–1339. https://doi.org/10.1139/cjce-2021-0420.
Hodges, K. V., R. R. Parrish, and M. P. Searle. 1996. “Tectonic evolution of the central Annapurna range, Nepalese Himalayas.” Tectonics 15 (6): 1264–1291. https://doi.org/10.1029/96TC01791.
Hussain, J., J. Zhang, F. Fitria, M. Shoaib, H. Hussain, A. Asghar, and S. Hussain. 2022a. “Aggregate suitability assessment of wargal limestone for pavement construction in Pakistan.” Open J. Civ. Eng. 12 (1): 56–74. https://doi.org/10.4236/ojce.2022.121005.
Hussain, J., J. Zhang, X. Lina, K. Hussain, S. Yasir, A. Shah, S. Ali, and A. Hussain. 2022b. “Resource assessment of limestone based on engineering and petrographic Analysis.” Civ. Eng. J. 8 (3): 421–437. https://doi.org/10.28991/CEJ-2022-08-03-02.
Hussain, K., D. Bin, J. Hussain, S. Y. A. Shah, H. Hussain, A. Hussain, and S. Hussain. 2022c. “Engineering geological and geotechnical investigations for design of oxygen plant.” Int. J. Geosci. 13 (4): 303–318. https://doi.org/10.4236/ijg.2022.134016.
Kallas, G., G. Palacios-Rodríguez, and S. Kattar. 2022. “Land suitability for biological wastewater treatment in lebanon and the litani river basin using fuzzy logic and analytical hierarchy process.” Forests 13 (2): 139. https://doi.org/10.3390/f13020139.
Karakaş, A. 2014. “Defining the suitability of new crushed rock aggregate source areas in the North of Kocaeli Province using GIS.” Bull. Eng. Geol. Environ. 73 (4): 1183–1197. https://doi.org/10.1007/s10064-013-0557-5.
Khan, S. R., and M. A. Khan. 2003. “Petrology and geochemistry of trondhjemites from the waziristan ophiolite, NW Pakistan.” Geol. Bull. Univ. 36 (Jan): 369–377.
Klootwijk, C. T., P. J. Conaghan, R. Nazirullah, and K. A. de Jong. 1994. “Further palaeomagnetic data from Chitral (Eastern Hindukush): Evidence for an early India-Asia contact.” Tectonophysics 237 (1–2): 1–25. https://doi.org/10.1016/0040-1951(94)90156-2.
Kuff, K. R. 1984. “Rates of preemption of sand and gravel deposits in an urban area.” In Proc., 20th Forum on the Geology of Industrial Minerals, 73–79. Champaign, IL: Illinois State Geological State Survey.
Lake, P. S., M. A. Palmer, P. Biro, J. Cole, A. P. Covich, C. Dahm, J. Gibert, W. Goedkoop, K. Martens, and J. O. S. Verhoeven. 2000. “Global change and the biodiversity of freshwater ecosystems: Impacts on linkages between above-sediment and sediment biota: All forms of anthropogenic disturbance—Changes in land use, biogeochemical processes, or biotic addition or loss—Not only damage the biota of freshwater sediments but also disrupt the linkages between above-sediment and sediment-dwelling biota.” Bioscience 50 (12): 1099–1107. https://doi.org/10.1641/0006-3568(2000)050[1099:GCATBO]2.0.CO;2.
Langer, W. H. 2002. Managing and protecting aggregate resources. Denver: US Dept. of the Interior, USGS.
Le Fort, P. 1975. “Himalayas: The collided range. Present knowledge of the continental arc.” Am. J. Sci. 275 (1): 1–44.
Liao, S., Z. Bai, and Y. Bai. 2012. “Errors prediction for vector-to-raster conversion based on map load and cell size.” Chin. Geogr. Sci. 22 (6): 695–704. https://doi.org/10.1007/s11769-012-0544-y.
Lüttig, G. W. 1994. “Rational management of the geo-environment—A view in favour of ‘Geobased Planning.’” In Proc., Aggregates-Raw Minerals Giant Report 2nd Int. Aggregate Symp. Erlangen, 1–34. Cambridge, UK: Cambridge University Press.
Malkani, M. S., and Z. Mahmood. 2016. “Revised stratigraphy of Pakistan.” Geol. Surv. Pak., Rec. 127: 1–87.
Malkani, M. S., and Z. Mahmood. 2017. “Stratigraphy of Pakistan.” Geol. Surv. Pak., Mem. 24: 1–134.
Meissner, C. R., Jr., M. Hussain, M. A. Rashid, and U. B. Sethi. 1975. Geology of the parachinar quadrangle, Pakistana. Washington, DC: US Government Printing Office.
Memarbashi, E., H. Azadi, A. A. Barati, F. Mohajeri, S. Van Passel, and F. Witlox. 2017. “Land-use suitability in Northeast Iran: Application of AHP-GIS hybrid model.” ISPRS Int. J. Geo-Info. 6 (12): 396. https://doi.org/10.3390/ijgi6120396.
Myronidis, D., C. Papageorgiou, and S. Theophanous. 2016. “Landslide susceptibility mapping based on landslide history and analytic hierarchy process (AHP).” Nat. Hazards 81 (1): 245–263. https://doi.org/10.1007/s11069-015-2075-1.
Powell, C. M. 1979. “A morphological classification of rock cleavage.” Tectonophysics 58 (1–2): 21–34. https://doi.org/10.1016/0040-1951(79)90320-2.
Quadros, S. G. R., and C. D. Nassi. 2015. “An evaluation on the criteria to prioritize transportation infrastructure investments in Brazil.” Transp. Policy 40 (May): 8–16. https://doi.org/10.1016/j.tranpol.2015.02.002.
Rademeyer, B. 2012. A generic environmental management programme for the quarrying of aggregate resources. Johannesburg, South Africa: Univ. of Johannesburg.
Ren, Z., M. Jiang, D. Chen, Y. Yu, F. Li, M. Xu, S. Bringezu, and B. Zhu. 2022. “Stocks and flows of sand, gravel, and crushed stone in China (1978–2018): Evidence of the peaking and structural transformation of supply and demand.” Resour. Conserv. Recycl. 180 (May): 106173. https://doi.org/10.1016/j.resconrec.2022.106173.
Robinson, G. R., K. E. Kapo, and G. L. Raines. 2004. “A GIS analysis to evaluate areas suitable for crushed stone aggregate quarries in New England, USA.” Nat. Resour. Res. 13 (3): 143–159. https://doi.org/10.1023/B:NARR.0000046917.21649.8d.
Saaty, T. L. 1990. “How to make a decision: The analytic hierarchy process.” Eur. J. Oper. Res. 48 (1): 9–26. https://doi.org/10.1016/0377-2217(90)90057-I.
Shah, S. Y. A., D. Bin, J. Hussain, K. Hussain, A. Asghar, H. Hussain, and A. U. Rahman. 2022. “Physio-mechanical properties and petrographic analysis of NikanaiGhar Limestone KPK, Pakistan.” Open J. Civ. Eng. 12 (2): 169–188. https://doi.org/10.4236/ojce.2022.122011.
Singh, P. K., O. A. Bhardwaj, and A. Kumar. 2011. “Site selection for ground water recharge using treated municipal wastewaters—A case study of Varanasi (India).” Recent Adv. Civ. Eng. 122–130.
Smith, M. R., and L. Collis. 2001. Aggregates: Sand, gravel and crushed rock aggregates for construction purposes. London: Geological Society of London. https://doi.org/10.1144/GSL.ENG.2001.017.
Srivastava, P., and G. Mitra. 1994. “Thrust geometries and deep structure of the outer and lesser Himalaya, Kumaon and Garhwal (India): Implications for evolution of the Himalayan fold-and-thrust belt.” Tectonics 13 (1): 89–109. https://doi.org/10.1029/93TC01130.
Stanley, M. C., J. E. Marlow, and D. P. Harris. 2000. “Land-use issues and the aggregates industry—an introduction to the issues we face.” Aggregates Manage. 5 (9): 30–33.
Stöcklin, J. 1980. “Geology of Nepal and its regional frame: Thirty-third William Smith Lecture.” J. Geol. Soc. London 137 (1): 1–34. https://doi.org/10.1144/gsjgs.137.1.0001.
Tajbakhshian, M., G. M. H. MAHMUDI, A. Mahboubi, H. R. MUSSAVI, and I. Ejlali. 2017. “Effects of environmental factors and recovered Sulfur in Shahid Hashemi Nezhad Gas Refinery on the Soils Quality for Irrigation.” J. Water Soil 862 (Jan): 846. https://doi.org/10.22067/JSW.V31I3.54415.
Tepordei, V. V. 2001. “US aggregates industry—An overview.” Aggregates Manage. 5 (11): 13–15.
Vaidya, O. S., and S. Kumar. 2006. “Analytic hierarchy process: An overview of applications.” Eur. J. Oper. Res. 169 (1): 1–29. https://doi.org/10.1016/j.ejor.2004.04.028.
Vasistha, P., and R. Ganguly. 2022. “Water quality assessment in two lakes of Panchkula, Haryana, using GIS: Case study on seasonal and depth wise variations.” Environ. Sci. Pollut. Res. 29 (28): 43212–43236. https://doi.org/10.1007/s11356-022-18635-y.
Wang, B., H.-L. Xie, H.-Y. Ren, X. Li, L. Chen, and B.-C. Wu. 2019. “Application of AHP, TOPSIS, and TFNs to plant selection for phytoremediation of petroleum-contaminated soils in shale gas and oil fields.” J. Cleaner Prod. 233 (Oct): 13–22. https://doi.org/10.1016/j.jclepro.2019.05.301.
Wang, X., W. Zheng, W. Tian, Y. Gao, X. Wang, Y. Tian, J. Li, and X. Zhang. 2022. “Groundwater hydrogeochemical characterization and quality assessment based on integrated weight matter-element extension analysis in Ningxia, upper Yellow River, northwest China.” Ecol. Indic. 135 (Feb): 108525. https://doi.org/10.1016/j.ecolind.2021.108525.
Xue, R., C. Wang, M. Liu, D. Zhang, K. Li, and N. Li. 2019. “A new method for soil health assessment based on Analytic Hierarchy Process and meta-analysis.” Sci. Total Environ. 650 (Feb): 2771–2777. https://doi.org/10.1016/j.scitotenv.2018.10.049.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Apr 17, 2022
Accepted: Jan 24, 2023
Published online: Jun 24, 2023
Published in print: Sep 1, 2023
Discussion open until: Nov 24, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.