Numerical Analysis of the Impacts of Multiscale Fractures on Geothermal Reservoir Capacity
Publication: Journal of Energy Engineering
Volume 149, Issue 6
Abstract
A fracture network as the main channel of seepage and heat transfer has been a key focus in an enhanced geothermal system. The fractures in the geothermal reservoir usually have a strong multiscale nature in length, but the impacts of each scale fracture on geothermal reservoir productivity have not been studied so far. This paper investigates these impacts based on a discrete fracture matrix model. Firstly, the fractures are divided into four scales of micro-scale, small-scale, medium-scale, and large-scale in the dimension of a representative volume element (RVE). Secondly, governing equations are carefully formulated for matrix deformation, matrix percolation, fracture percolation, matrix heat transfer, and fracture heat transfer, thus a thermal-hydraulic-mechanical (THM) coupling model is established. Thirdly, the distribution of pore pressure and temperature, the fluid flow in fractures, and the deformation of multiscale fractured reservoirs are numerically simulated and those numerical results are comprehensively evaluated by three indicators. Finally, the impacts of each scale fracture on geothermal reservoir productivity are explored. The productivity of reservoirs with single-scale and full-scale fractures is compared. It is found that three pressure zones are formed along the mining direction in the fractured geothermal reservoir: high-pressure zone, medium-pressure zone, and low-pressure zone. Both pressure and temperature influence the reservoir deformation with a trend of first decreasing and then increasing. The impact of large-scale fractures on the steady power and cumulative heat recovery exceeds 90%. Excessive heat production from single medium-scale and large-scale fractured reservoirs induces a local thermal breakthrough prematurely. In contrast, the synergistic action of multiscale fractures can prolong thermal breakthrough time and maintain the reservoir at a higher steady power.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors are grateful for the financial support from the National Natural Science Foundation of China (Grant Nos. 51674246, 42030810).
References
Baisch, S., R. Vörös, R. Weidler, and D. Wyborn. 2009. “Investigation of fault mechanisms during geothermal reservoir stimulation experiments in the Cooper Basin, Australia.” Bull. Seismol. Soc. Am. 99 (1): 148–158. https://doi.org/10.1785/0120080055.
Berre, I., F. Doster, and E. Keilegavlen. 2018. “Flow in fractured porous media: A review of conceptual models and discretization approaches.” Transp. Porous Media 130 (1): 215–236. https://doi.org/10.1007/s11242-018-1171-6.
Bour, O., P. Davy, C. Darcel, and N. Odling. 2002. “A statistical scaling model for fracture network geometry, with validation on a multiscale mapping of a joint network (Hornelen Basin, Norway).” J. Geophys. Res.: Solid Earth 107 (B6): ETG 4-1–ETG 4-12. https://doi.org/10.1029/2001JB000176.
Breede, K., K. Dzebisashvili, X. Liu, and G. Falcone. 2013. “A systematic review of enhanced (or engineered) geothermal systems: Past, present and future.” Geotherm. Energy 1 (Dec): 1–27. https://doi.org/10.1186/2195-9706-1-4.
Bruel, D. 1995. “Heat extraction modelling from forced fluid flow through stimulated fractured rock masses: Application to the Rosemanowes hot dry rock reservoir.” Geothermics 24 (3): 361–374. https://doi.org/10.1016/0375-6505(95)00014-H.
Cao, W., W. Huang, and F. Jiang. 2016. “A novel thermal-hydraulic-mechanical model for the enhanced geothermal system heat extraction.” Int. J. Heat Mass Transfer 100 (Sep): 661–671. https://doi.org/10.1016/j.ijheatmasstransfer.2016.04.078.
Chen, J., T. Xu, X. Liang, and S. Zhang. 2023. “Evaluation and optimization of heat extraction strategies based on deep neural network in the enhanced geothermal system.” J. Energy Eng. 149 (1): 04022050. https://doi.org/10.1061/JLEED9.EYENG-4579.
Chen, T. 2020. “Equivalent permeability distribution for fractured porous rocks: The influence of fracture network properties.” Geofluids 2020 (Dec): 6751349. https://doi.org/10.1155/2020/6751349.
Chen, Y., G. Ma, H. Wang, and T. Li. 2018. “Evaluation of geothermal development in fractured hot dry rock based on three-dimensional unified pipe-network method.” Appl. Therm. Eng. 136 (May): 219–228. https://doi.org/10.1016/j.applthermaleng.2018.03.008.
Cui, G., W. Wang, B. Dou, Y. Liu, H. Tian, J. Zheng, and Y. Liu. 2022. “Geothermal energy exploitation and power generation via a single vertical well combined with hydraulic fracturing.” J. Energy Eng. 148 (1): 04021058. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000809.
Davy, P., O. Bour, J. R. De Dreuzy, and C. Darcel. 2006. “Flow in multiscale fractal fracture networks.” Geol. Soc. London Spec. Publ. 261 (1): 31–45. https://doi.org/10.1144/GSL.SP.2006.261.01.03.
Ezekiel, J., A. Ebigbo, B. M. Adams, and M. O. Saar. 2020. “Combining natural gas recovery and -based geothermal energy extraction for electric power generation.” Appl. Energy 269 (Jul): 115012. https://doi.org/10.1016/j.apenergy.2020.115012.
Flemisch, B., I. Berre, W. Boon, A. Fumagalli, N. Schwenck, A. Scotti, I. Stefansson, and A. Tatomir. 2018. “Benchmarks for single-phase flow in fractured porous media.” Adv. Water Resour. 111 (Jan): 239–258. https://doi.org/10.1016/j.advwatres.2017.10.036.
Fumagalli, A., E. Keilegavlen, and S. Scialò. 2019. “Conforming, non-conforming and non-matching discretization couplings in discrete fracture network simulations.” J. Comput. Phys. 376 (Jan): 694–712. https://doi.org/10.1016/j.jcp.2018.09.048.
Genter, A., K. Evans, N. Cuenot, D. Fritsch, and B. Sanjuan. 2010. “Contribution of the exploration of deep crystalline fractured reservoir of Soultz to the knowledge of enhanced geothermal systems (EGS).” C. R. Geosci. 342 (7–8): 502–516. https://doi.org/10.1016/j.crte.2010.01.006.
Gong, F., T. Guo, W. Sun, Z. Li, B. Yang, Y. Chen, and Z. Qu. 2020. “Evaluation of geothermal energy extraction in enhanced geothermal system (EGS) with multiple fracturing horizontal wells (MFHW).” Renewable Energy 151 (May): 1339–1351. https://doi.org/10.1016/j.renene.2019.11.134.
Han, C., G. Wu, and X. B. Yu. 2018. “Performance analyses of geothermal and geothermoelectric pavement snow melting system.” J. Energy Eng. 144 (6): 04018067. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000585.
Holzbecher, O. E. 1998. Modeling density-driven flow in porous media principles, numerics, software. Berlin: Springer.
Hou, J., M. Cao, and P. Liu. 2018. “Development and utilization of geothermal energy in China: Current practices and future strategies.” Renewable Energy 125 (Sep): 401–412. https://doi.org/10.1016/j.renene.2018.02.115.
Hu, B., J. Wang, and Z. Ma. 2020. “A fractal discrete fracture network based model for gas production from fractured shale reservoirs.” Energies 13 (7): 1857. https://doi.org/10.3390/en13071857.
Hu, B., J. Wang, Z. Ma, and S. Sang. 2021a. “Permeability and thermal conductivity models of shale matrix with a bundle of tortuous fractal tree-like branching micropore networks.” Int. J. Therm. Sci. 164 (Jun): 106876. https://doi.org/10.1016/j.ijthermalsci.2021.106876.
Hu, Y., H. Cheng, and S. Tao. 2021b. “Opportunity and challenges in large-scale geothermal energy exploitation in China.” Crit. Rev. Environ. Sci. Technol. 52 (21): 3813–3834. https://doi.org/10.1080/10643389.2021.1971004.
Jafari, A., and T. Babadagli. 2012. “Estimation of equivalent fracture network permeability using fractal and statistical network properties.” J. Pet. Sci. Eng. 92 (Aug): 110–123. https://doi.org/10.1016/j.petrol.2012.06.007.
Ju, Y., J. Dong, F. Gao, and J. Wang. 2019. “Evaluation of water permeability of rough fractures based on a self-affine fractal model and optimized segmentation algorithm.” Adv. Water Resour. 129 (Jul): 99–111. https://doi.org/10.1016/j.advwatres.2019.05.007.
Kelkar, S., G. WoldeGabriel, and K. Rehfeldt. 2016. “Lessons learned from the pioneering hot dry rock project at Fenton Hill, USA.” Geothermics 63 (Sep): 5–14. https://doi.org/10.1016/j.geothermics.2015.08.008.
Li, J., Z. Lei, H. Tang, C. Tian, and B. Gong. 2016. “Efficient evaluation of gas recovery enhancement by hydraulic fracturing in unconventional reservoirs.” J. Nat. Gas Sci. Eng. 35 (Sep): 873–881. https://doi.org/10.1016/j.jngse.2016.08.067.
Li, M., Z. Zhou, M. Chen, and J. Wu. 2022. “Topological representative element volume of fractured rock mass.” Appl. Sci. 12 (6): 2844. https://doi.org/10.3390/app12062844.
Li, T., D. Han, F. Yang, J. Li, D. Wang, B. Yu, and J. Wei. 2021. “Modeling study of the thermal-hydraulic-mechanical coupling process for EGS based on the framework of EDFM and XFEM.” Geothermics 89 (Jan): 101953. https://doi.org/10.1016/j.geothermics.2020.101953.
Liang, W., J. Wang, S. Sang, and P. Li. 2022. “The influence of closed pores and stacked coal grains on gas transport in injection enhanced recovery process.” J. Pet. Sci. Eng. 212 (May): 110303. https://doi.org/10.1016/j.petrol.2022.110303.
Lu, S. 2018. “A global review of enhanced geothermal system (EGS).” Renewable Sustainable Energy Rev. 81 (Jan): 2902–2921. https://doi.org/10.1016/j.rser.2017.06.097.
Ma, G., T. Li, Y. Wang, and Y. Chen. 2019. “The equivalent discrete fracture networks based on the correlation index in highly fractured rock masses.” Eng. Geol. 260 (Oct): 105228. https://doi.org/10.1016/j.enggeo.2019.105228.
Mahmoodpour, S., M. Singh, K. Bar, and I. Sass. 2022. “Thermo-hydro-mechanical modeling of an enhanced geothermal system in a fractured reservoir using carbon dioxide as heat transmission fluid—A sensitivity investigation.” Energy 254 (Sep): 124266. https://doi.org/10.1016/j.energy.2022.124266.
Moradi, M., A. Shamloo, and A. D. Dezfuli. 2017. “A sequential implicit discrete fracture model for three-dimensional coupled flow-geomechanics problems in naturally fractured porous media.” J. Pet. Sci. Eng. 150 (Feb): 312–322. https://doi.org/10.1016/j.petrol.2016.12.027.
Oda, M. 1988. “A method for evaluating the representative elementary volume based on joint survey of rock masses.” Can. Geotech. J. 25 (3): 440–447. https://doi.org/10.1139/t88-049.
Pang, Z., Y. Kong, H. Shao, and O. Kolditz. 2018. “Progress and perspectives of geothermal energy studies in China: From shallow to deep systems.” Environ. Earth Sci. 77 (16): 580. https://doi.org/10.1007/s12665-018-7757-z.
Qu, Z., W. Zhang, and T. Guo. 2017. “Influence of different fracture morphology on heat mining performance of enhanced geothermal systems based on COMSOL.” Int. J. Hydrogen Energy 42 (29): 18263–18278. https://doi.org/10.1016/j.ijhydene.2017.04.168.
Rutqvist, J., Y. S. Wu, C. F. Tsang, and G. Bodvarsson. 2002. “A modeling approach for analysis of coupled multiphase fluid flow, heat transfer, and deformation in fractured porous rock.” Int. J. Rock Mech. Min. Sci. 39 (4): 429–442. https://doi.org/10.1016/S1365-1609(02)00022-9.
Shi, Y., X. Song, J. Li, G. Wang, R. Zheng, and F. YuLong. 2019. “Numerical investigation on heat extraction performance of a multilateral-well enhanced geothermal system with a discrete fracture network.” Fuel 244 (May): 22–30. https://doi.org/10.1016/j.fuel.2019.01.164.
Sun, Q., Z. E. Lee, Z. Li, K. M. Zhang, P. Yang, and J. Wang. 2021. “Thermodynamic and economic analysis of a novel solar-assisted ground source absorption heat pump system.” J. Energy Eng. 147 (2): 04021004. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000747.
Sun, Z., X. Zhang, Y. Xu, J. Yao, H. Wang, S. Lv, Z. Sun, Y. Huang, M. Cai, and X. Huang. 2017. “Numerical simulation of the heat extraction in EGS with thermal-hydraulic-mechanical coupling method based on discrete fractures model.” Energy 120 (Feb): 20–33. https://doi.org/10.1016/j.energy.2016.10.046.
Wang, K., H. Liu, J. Luo, K. Wu, and Z. Chen. 2017. “A comprehensive model coupling embedded discrete fractures, multiple interacting continua, and geomechanics in shale gas reservoirs with multiscale fractures.” Energy Fuels 31 (8): 7758–7776. https://doi.org/10.1021/acs.energyfuels.7b00394.
Wang, L., and Q. Lei. 2021. “A dual-scale fracture network model for computing hydro-mechanical properties of fractured rock.” Comput. Geotech. 138 (Oct): 104357. https://doi.org/10.1016/j.compgeo.2021.104357.
Witherspoon, P. A., J. S. Y. Wang, K. Iwai, and J. E. Gale. 1980. “Validity of cubic law for fluid flow in a deformable rock fracture.” Water Resour. Res. 16 (6): 1016–1024. https://doi.org/10.1029/WR016i006p01016.
Xie, J., H. Cao, D. Wang, S. Peng, G. Fu, and Z. Zhu. 2022. “A comparative study on the hydraulic fracture propagation behaviors in hot dry rock and shale formation with different structural discontinuities.” J. Energy Eng. 148 (6): 04022040. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000869.
Yamaguchi, S., S. Akibayashi, S. Rokugawa, Y. Fujinaga, N. Tenma and Y. Sato. 2000. “The numerical modeling study of the Hijiori HDR test site.” In Proc., World Geothermal Congress. Akita, Japan: Akita Univ.
Yao, J., X. Zhang, Z. Sun, Z. Huang, J. Liu, Y. Li, Y. Xin, X. Yan, and W. Liu. 2018. “Numerical simulation of the heat extraction in 3D-EGS with thermal hydraulic-mechanical coupling method based on discrete fractures model.” Geothermics 74 (Jul): 19–34. https://doi.org/10.1016/j.geothermics.2017.12.005.
Ye, Z., and J. Wang. 2020a. “A coupling analysis for heat transfer and water flow in a fractal rough fracture of geothermal reservoirs.” Fractals 28 (6): 2050100. https://doi.org/10.1142/S0218348X20501005.
Ye, Z., and J. Wang. 2020b. “A thermal-hydraulic-mechanical coupling study of heat extraction from the geothermal reservoir with a discrete fracture network.” Geofluids 2020 (Nov): 8875918. https://doi.org/10.1155/2020/8875918.
Ye, Z., J. Wang, and B. Hu. 2021. “Comparative study on heat extraction performance of geothermal reservoirs with presupposed shapes and permeability heterogeneity in the stimulated reservoir volume.” J. Pet. Sci. Eng. 206 (Nov): 109023. https://doi.org/10.1016/j.petrol.2021.109023.
Zhang, D., R. Zhang, S. Chen, and W. E. Soll. 2000. “Pore scale study of flow in porous media: Scale dependency, REV, and statistical REV.” Geophys. Res. Lett. 27 (8): 1195–1198. https://doi.org/10.1029/1999GL011101.
Zhang, L., S. Chen, and C. Zhang. 2019a. “Geothermal power generation in China: Status and prospects.” Energy Sci. Eng. 7 (5): 1428–1450. https://doi.org/10.1002/ese3.365.
Zhang, L., J. Ezekiel, D. Li, J. Pei, and S. Ren. 2014. “Potential assessment of injection for heat mining and geological storage in geothermal reservoirs of China.” Appl. Energy 122 (Jun): 237–246. https://doi.org/10.1016/j.apenergy.2014.02.027.
Zhang, W., W. Diab, H. Hajibeygi, and M. Al Kobaisi. 2020. “A computational workflow for flow and transport in fractured porous media based on a hierarchical nonlinear discrete fracture modeling approach.” Energies 13 (24): 6667. https://doi.org/10.3390/en13246667.
Zhang, W., Z. Qu, T. Guo, and Z. Wang. 2019b. “Study of the enhanced geothermal system (EGS) heat mining from variably fractured hot dry rock under thermal stress.” Renewable Energy 143 (Dec): 855–871. https://doi.org/10.1016/j.renene.2019.05.054.
Zhang, W., S. Wang, S. Song, C. Tan, Z. Ma, B. Shan, and P. Xu. 2023. “Determination of representative volume element with consideration of linear anisotropy using geostatistics approach.” Eur. J. Environ. Civ. Eng. 27 (9): 2783–2799. https://doi.org/10.1080/19648189.2020.1815588.
Zhang, X., J. Yu, N. Li, and C. Wang. 2021. “Multi-scale fracture prediction and characterization method of a fractured carbonate reservoir.” J. Pet. Explor. Prod. 11 (1): 191–202. https://doi.org/10.1007/s13202-020-01033-w.
Zhang, Y., and G. Zhao. 2020. “A global review of deep geothermal energy exploration: From a view of rock mechanics and engineering.” Geomech. Geophys. Geo-Energy Geo-Resour. 6 (1): 4. https://doi.org/10.1007/s40948-019-00126-z.
Zhao, Y., Z. Feng, Z. Feng, D. Yang, and W. Liang. 2015. “THM (thermo-hydro-mechanical) coupled mathematical model of fractured media and numerical simulation of a 3D enhanced geothermal system at 573 K and buried depth 6000-7000 m.” Energy 82 (Mar): 193–205. https://doi.org/10.1016/j.energy.2015.01.030.
Zheng, J., T. Fan, B. Dou, G. Cui, and H. Tian. 2022. “A thermal-hydraulic-mechanical coupling simulation of fluid flow and heat transfer specifically in crossed-rough fractures in a geothermal reservoir.” J. Energy Eng. 148 (6): 04022032. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000859.
Zhou, D., A. Tatomir, A. Niemi, C. Tsang, and M. Sauter. 2022. “Study on the influence of randomly distributed fracture aperture in a fracture network on heat production from an enhanced geothermal system (EGS).” Energy 250 (Jul): 123781. https://doi.org/10.1016/j.energy.2022.123781.
Zhuang, D., T. Yin, Q. Li, Y. Wu, and X. Tan. 2022. “Effect of injection flow rate on fracture toughness during hydraulic fracturing of hot dry rock (HDR).” Eng. Fract. Mech. 260 (Feb): 108207. https://doi.org/10.1016/j.engfracmech.2021.108207.
Information & Authors
Information
Published In
Journal of Energy Engineering
Volume 149 • Issue 6 • December 2023
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jan 2, 2023
Accepted: Jul 20, 2023
Published online: Sep 19, 2023
Published in print: Dec 1, 2023
Discussion open until: Feb 19, 2024
ASCE Technical Topics:
- Continuum mechanics
- Cracking
- Deformation (mechanics)
- Energy engineering
- Energy sources (by type)
- Engineering fundamentals
- Engineering mechanics
- Fracture mechanics
- Heat transfer
- Hydraulic engineering
- Hydraulic structures
- Mathematical functions
- Mathematics
- Matrix (mathematics)
- Models (by type)
- Numerical models
- Renewable energy
- Reservoirs
- Solid mechanics
- Structural mechanics
- Thermal effects
- Thermal power
- Thermodynamics
- Water and water resources
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.