Cofiring Coal Slime with Anthracite in a Down-Fired Utility Boiler: Experimental and Numerical Investigations
Publication: Journal of Energy Engineering
Volume 149, Issue 2
Abstract
Cofiring of coal slime in existing utility boilers is a promising approach to the disposal of coal slime. However, reports about cofiring coal slime with anthracite in the down-fired utility boiler are still few. This work presents a comprehensive study on the combustion characteristics, slagging potential, and emissions of cofiring coal slime and anthracite through lab-scale experiments, numerical simulations, and full-scale industrial measurements in a 600MW down-fired utility boiler. The lab-scale experiments show combustion interactions between anthracite and coal slime, which have both a promotive effect on the ignition of anthracite and inhibitive effect on the combustion and burnout of anthracite. Especially, the inhibitive effect is greater than the promotive effect when the blending ratio of coal slime is above 5%. The addition of coal slime can effectively improve the ash fusion temperature of blended samples. In addition, simulations and full-scale industrial measurements of anthracite cofiring with coal slime are performed in a down-fired utility boiler. The results show that as the blending ratio of coal slime increases, the carbon content in fly ash increases and the boiler efficiency and emissions decrease. A 5% ratio is validated to be a reasonable cofiring ratio of coal slime in the actual operation without no slagging phenomenon. These results provide more insights into the cofiring behavior of coal slime and anthracite and guide the application of blending coal slime in a down-fired boiler.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This work was sponsored by China Postdoctoral Science Foundation (2019M652639) and Inter-governmental International Scientific and Technological Innovation Cooperation Project of National Key R&D Program of China (No. 2021YFE0107300).
References
Backreedy, R. I., L. M. Fletcher, L. Ma, M. Pourkashanian, and A. Williams. 2006. “Modelling pulverised coal combustion using a detailed coal combustion model.” Combust. Sci. Technol. 178 (4): 763–787. https://doi.org/10.1080/00102200500248532.
Deng, C., C. Zhang, P. Tan, Q. Fang, and G. Chen. 2015. “The melting and transformation characteristics of minerals during co-combustion of coal with different sludges.” Energy Fuels 29 (10): 6758–6767. https://doi.org/10.1021/acs.energyfuels.5b01201.
Duan, L., D. Liu, X. Chen, and C. Zhao. 2012. “Fly ash recirculation by bottom feeding on a circulating fluidized bed boiler co-burning coal sludge and coal.” Appl. Energy 95 (Jul): 295–299. https://doi.org/10.1016/j.apenergy.2012.02.063.
Fan, H., B. Deng, J. Shi, S. Qin, Y. Feng, Z. Huang, B. Fan, H. Yang, Y. Jin, and M. Zhang. 2021. “Experimental research on morphology and drying characteristics of coal slime dough injected into circulating fluidized bed boiler.” Fuel Process. Technol. 222 (Nov): 106981. https://doi.org/10.1016/j.fuproc.2021.106981.
Fang, Q., A. A. Musa, Y. Wei, Z. Luo, and H. Zhou. 2012. “Numerical simulation of multifuel combustion in a 200 MW tangentially fired utility boiler.” Energy Fuels 26 (1): 313–323. https://doi.org/10.1021/ef201149p.
Fang, Q., H. Wang, Y. Wei, L. Lei, X. Duan, and H. Zhou. 2010. “Numerical simulations of the slagging characteristics in a down-fired, pulverized-coal boiler furnace.” Fuel Process. Technol. 91 (1): 88–96. https://doi.org/10.1016/j.fuproc.2009.08.022.
Fryda, L., C. Sobrino, M. Cieplik, and W. L. Van de Kamp. 2010. “Study on ash deposition under oxyfuel combustion of coal/biomass blends.” Fuel 89 (8): 1889–1902. https://doi.org/10.1016/j.fuel.2009.11.022.
Fu, B., G. Liu, M. M. Mian, C. Zhou, M. Sun, D. Wu, and Y. Liu. 2019. “Co-combustion of industrial coal slurry and sewage sludge: Thermochemical and emission behavior of heavy metals.” Chemosphere 233 (Oct): 440–451. https://doi.org/10.1016/j.chemosphere.2019.05.256.
Ji, Z., G. Song, Z. Yang, Y. Xiao, X. Yang, C. Wang, and X. Zhang. 2021. “Effect of post-combustion air distribution on NOx original emission and combustion characteristics of coal slime circulating fluidized bed boiler.” J. Energy Inst. 99 (Dec): 154–160. https://doi.org/10.1016/j.joei.2021.09.008.
Kuang, M., H. Wu, Q. Zhu, and S. Ti. 2018. “Establishing an overall symmetrical combustion setup for a 600 MWe supercritical down-fired boiler: A numerical and cold-modeling experimental verification.” Energy 147 (Mar): 208–225. https://doi.org/10.1016/j.energy.2018.01.026.
Kuang, M., Q. Zhu, Z. Ling, S. Ti, and Z. Li. 2017a. “Improving gas/particle flow deflection and asymmetric combustion of a 600 MWe supercritical down-fired boiler by increasing its upper furnace height.” Energy 127 (May): 581–593. https://doi.org/10.1016/j.energy.2017.04.002.
Kuang, M., Q. Zhu, G. Yang, S. Ti, and Z. Li. 2017b. “The fate of shrinking boiler nose to improve the flow-field deflection and asymmetric combustion in a 600 MWe supercritical down-fired boiler.” Fuel Process. Technol. 167 (Dec): 371–381. https://doi.org/10.1016/j.fuproc.2017.07.005.
Li, D., D. Wu, F. Xu, J. Lai, and L. Shao. 2018. “Literature overview of Chinese research in the field of better coal utilization.” J. Cleaner Prod. 185 (Jun): 959–980. https://doi.org/10.1016/j.jclepro.2018.02.216.
Ma, L., X. Chen, S. Yu, Q. Fang, C. Zhang, and G. Chen. 2021. “Effect of H2O on the combustion characteristics and interactions of blended coals in O2/H2O/CO2 atmosphere.” J. Energy Inst. 94 (Feb): 222–232. https://doi.org/10.1016/j.joei.2020.09.006.
Ma, L., Q. Fang, P. Tan, C. Zhang, G. Chen, D. Lv, X. Duan, and Y. Chen. 2016. “Effect of the separated overfire air location on the combustion optimization and NOx reduction of a 600 MWeFW down-fired utility boiler with a novel combustion system.” Appl. Energy 180 (Oct): 104–115. https://doi.org/10.1016/j.apenergy.2016.07.102.
Ma, L., M. Gharebaghi, R. Porter, M. Pourkashanian, J. M. Jones, and A. Williams. 2009. “Modelling methods for co-fired pulverised fuel furnaces.” Fuel 88 (12): 2448–2454. https://doi.org/10.1016/j.fuel.2009.02.030.
Ma, L., S. Yu, Q. Fang, C. Zhang, and G. Chen. 2019. “Effect of different conditions on the combustion interactions of blended coals in O2/CO2 mixtures.” J. Energy Inst. 92 (3): 413–427. https://doi.org/10.1016/j.joei.2018.05.006.
Ma, L., S. Yu, Q. Fang, C. Zhang, and G. Chen. 2020. “Effect of separated over-fire air angle on combustion and NOx emissions in a down-fired utility boiler with a novel combustion system.” Process Saf. Environ. 138 (Jun): 57–66. https://doi.org/10.1016/j.psep.2020.03.005.
Moon, C., Y. Sung, S. Ahn, T. Kim, G. Choi, and D. Kim. 2013. “Thermochemical and combustion behaviors of coals of different ranks and their blends for pulverized-coal combustion.” Appl. Therm. Eng. 54 (1): 111–119. https://doi.org/10.1016/j.applthermaleng.2013.01.009.
Sheng, C., B. Moghtaderi, R. Gupta, and T. F. Wall. 2004. “A computational fluid dynamics based study of the combustion characteristics of coal blends in pulverised coal-fired furnace.” Fuel 83 (11–12): 1543–1552. https://doi.org/10.1016/j.fuel.2004.02.011.
Song, G., Y. Xiao, Z. Yang, X. Yang, Q. Lyu, X. Zhang, and Q. Pan. 2021. “Operating characteristics and ultra-low NOx emission of coal slime circulating fluidized bed boiler with post-combustion technology.” Fuel 292 (May): 120276. https://doi.org/10.1016/j.fuel.2021.120276.
Tan, P., L. Ma, Q. Fang, C. Zhang, and G. Chen. 2015. “Application of different combustion models for simulating the co-combustion of sludge with coal in a 100 MW tangentially coal-fired utility boiler.” Energy Fuels 30 (3): 1685–1692. https://doi.org/10.1021/acs.energyfuels.5b02236.
Tian, D., L. Zhong, P. Tan, L. Ma, Q. Fang, C. Zhang, D. Zhang, and G. Chen. 2015. “Influence of vertical burner tilt angle on the gas temperature deviation in a 700 MW low NOx tangentially fired pulverised-coal boiler.” Fuel Process. Technol. 138 (Oct): 616–628. https://doi.org/10.1016/j.fuproc.2015.07.002.
Wang, C. A., Y. Liu, X. Zhang, and D. Che. 2011. “A study on coal properties and combustion characteristics of blended coals in northwestern China.” Energy Fuels 25 (8): 3634–3645. https://doi.org/10.1021/ef200686d.
Wang, Q., Z. Chen, L. Wang, L. Zeng, and Z. Li. 2018. “Application of eccentric-swirl-secondary-air combustion technology for high-efficiency and low-NOx performance on a large-scale down-fired boiler with swirl burners.” Appl. Energy 223 (Aug): 358–368. https://doi.org/10.1016/j.apenergy.2018.04.064.
Wang, X., Z. Hu, S. Deng, Y. Wang, and H. Tan. 2015. “Kinetics investigation on the combustion of biochar in O2/CO2 atmosphere.” Environ. Progress Sustainable 34 (3): 923–932. https://doi.org/10.1002/ep.12063.
Wang, X., Q. Lin, C. Wang, K. Zhou, P. Zhang, F. Li, and Y. Lei. 2019. “The ignition characteristics and combustion processes of coal gangue under different hot coflow conditions in O2/CO2 atmosphere: In pellet form.” Combust. Sci. Technol. 191 (3): 419–434. https://doi.org/10.1080/00102202.2018.1493468.
Wang, Y., L. Jia, J. Guo, B. Wang, L. Zhang, J. Xiang, and Y. Jin. 2021. “Thermogravimetric analysis of co-combustion between municipal sewage sludge and coal slime: Combustion characteristics, interaction and kinetics.” Thermochim. Acta 706 (Dec): 179056. https://doi.org/10.1016/j.tca.2021.179056.
Wei, Y., M. Kuang, Q. Zhu, Z. Ling, S. Ti, and Z. Li. 2017. “Alleviating gas/particle flow deflection and asymmetric combustion in a 600 MWe supercritical down-fired boiler by expanding its furnace throat space.” Appl. Therm. Eng. 123 (Aug): 1201–1213. https://doi.org/10.1016/j.applthermaleng.2017.05.113.
Xinjie, L., Z. Shihong, W. Xincheng, S. Jinai, Z. Xiong, W. Xianhua, Y. Haiping, and C. Hanping. 2021. “Co-combustion of wheat straw and camphor wood with coal slime: Thermal behaviour, kinetics, and gaseous pollutant emission characteristics.” Energy 234 (Nov): 121292. https://doi.org/10.1016/j.energy.2021.121292.
Zhang, J., Q. Wang, Y. Wei, and L. Zhang. 2015. “Numerical modeling and experimental investigation on the use of brown coal and its beneficiated semicoke for coal blending combustion in a 600 MWe utility furnace.” Energy Fuels 29 (2): 1196–1209. https://doi.org/10.1021/ef502287c.
Zhang, J., J. Zhu, Q. Lv, and Y. Zhang. 2022. “Experimental study on conversion path of sulfur in coal slime preheating combustion.” Waste Disposal Sustainable Energy 4 (1): 63–68. https://doi.org/10.1007/s42768-022-00094-3.
Zhang, W., J. Liu, M. M. Gao, and J. K. Huusom. 2019. “A novel operation cost optimization system for mix-burning coal slime circulating fluidized bed boiler unit.” Appl. Therm. Eng. 148 (Feb): 620–631. https://doi.org/10.1016/j.applthermaleng.2018.11.087.
Zhao, R., R. Dai, T. Chen, J. Qin, J. Zhang, and J. Wu. 2021. “Investigation on combustion, gaseous pollutants emission and ash characteristics during co-combustion of semicoke and coal slime.” J. Environ. Chem. Eng. 9 (5): 106249. https://doi.org/10.1016/j.jece.2021.106249.
Zhou, K., Q. Lin, H. Hu, F. Shan, W. Fu, P. Zhang, X. Wang, and C. Wang. 2018. “Ignition and combustion behaviors of single coal slime particles in CO2/O2 atmosphere.” Combust. Flame 194 (Aug): 250–263. https://doi.org/10.1016/j.combustflame.2018.05.004.
Zhuo, Z., J. Liu, S. Sun, J. Sun, J. Kuo, K. Chang, J. Fu, and Y. Wang. 2017. “Thermogravimetric characteristics of textile dyeing sludge, coal and their blend in N2/O2 and atmospheres.” Appl. Therm. Eng. 111 (Jan): 87–94. https://doi.org/10.1016/j.applthermaleng.2016.09.089.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Aug 22, 2022
Accepted: Oct 26, 2022
Published online: Dec 29, 2022
Published in print: Apr 1, 2023
Discussion open until: May 29, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.