IoT-Enabled Real-Time Monitoring System for Plastic Shrinkage of Concrete
Publication: Journal of Infrastructure Systems
Volume 29, Issue 3
Abstract
When exposed to hot and dry weather, concrete slabs and pavements frequently develop plastic shrinkage cracks. Such cracks have an influence on the quality and durability of concrete infrastructure, which is a cause of concern for the concrete construction sector. Existing methods for monitoring plastic shrinkage on the job site are inconvenient for the construction industry and are rarely used because they are time-consuming, labor-intensive, and costly. This research proposes two unique, cost-effective, and easily deployable IoT-enabled smart prototype systems for real-time monitoring of plastic shrinkage. Existing codes and standards advocate monitoring plastic shrinkage merely based on evaporation rate, ignoring the critical aspect of “bleed water status.” Accordingly, the first system is developed considering the evaporation rate, in accordance with ACI 305R standards. The novelty of the present research is the design of the second system, which considers the bleed water status to monitor plastic shrinkage. The combination of the first and second systems, as well as cloud communication, allows for precise monitoring in real-time without the need for human intervention from any remote location. Laboratory tests on three sets of concrete specimens demonstrate the efficiency of the proposed systems.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Data generated or analyzed during the study are available from the corresponding author by request.
References
Abdel-Jaber, H., and B. Glisic. 2015. “Analysis of the status of pre-release cracks in prestressed concrete structures using long-gauge sensors.” Smart Mater. Struct. 24 (2): 025038. https://doi.org/10.1088/0964-1726/24/2/025038.
ACI (American Concrete Institute). 2010. Guide to hot weather concreting. ACI 305R. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2014. Specification for hot weather concreting. ACI 305.1. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2016. Guide to external curing of concrete. ACI 308R. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2019. Building code requirements for structural concrete. ACI 318R. Farmington Hills, MI: ACI.
ADAFRUIT. 2021. “Anemometer wind speed sensor.” ADAFRUIT 1733. Accessed March 18, 2021. https://cdn-shop.adafruit.com/product-files/1733/C2192+datasheet.pdf.
Al-Fadhala, M., and K. C. Hover. 2001. “Rapid evaporation from freshly cast concrete and the Gulf environment.” Constr. Build. Mater. 15 (1): 1–7. https://doi.org/10.1016/S0950-0618(00)00064-7.
AS (Australian Standards). 2007. Specification and supply of concrete. AS 1379. Sydney, NSW: AS.
ASTM. 2006. Standard test method for evaluating plastic shrinkage cracking of restrained fiber reinforced concrete. ASTM C1579. West Conshohocken, PA: ASTM.
ASTM. 2009. Standard specification for ready-mixed concrete. ASTM C94. West Conshohocken, PA: ASTM.
ASTM. 2017. Standard test method for temperature of freshly mixed hydraulic-cement concrete. ASTM C1064. West Conshohocken, PA: ASTM.
ASTM. 2018. Standard specification for concrete aggregates. ASTM C33/C33M. West Conshohocken, PA: ASTM.
Australian Bulletin. 1995. Cracks in concrete due to plastic shrinkage and plastic settlement. Melbourne, VIC, Australia: Australian Pre-Mixed Concrete Association.
Banthia, N., and R. Gupta. 2006. “Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete.” Cem. Concr. Res. 36 (7): 1263–1267. https://doi.org/10.1016/j.cemconres.2006.01.010.
Bendimerad, A. Z., E. Rozière, and A. Loukili. 2016. “Plastic shrinkage and cracking risk of recycled aggregates concrete.” Constr. Build. Mater. 121 (6): 733–745. https://doi.org/10.1016/j.conbuildmat.2016.06.056.
Bertelsen, I. M. G., L. M. Ottosen, and G. Fischer. 2019. “Quantitative analysis of the influence of synthetic fibres on plastic shrinkage cracking using digital image correlation.” Constr. Build. Mater. 199 (Apr): 124–137. https://doi.org/10.1016/j.conbuildmat.2018.11.268.
Bhalla, N., S. Sharma, S. Sharma, and R. Siddique. 2018. “Monitoring early-age setting of silica fume concrete using wave propagation techniques.” Constr. Build. Mater. 162 (Dec): 802–815. https://doi.org/10.1016/j.conbuildmat.2017.12.032.
Boshoff, W. P. 2012. Plastic shrinkage cracking of concrete, part 1: Guideline. Stellenbosch, South Africa: Stellenbosch Univ.
BSI (British Standards Institution). 2000. Concrete. Specification, performance, production and conformity. BS EN 206-1. London: BSI.
Chao, A. 2011. “Investigation of portland cement concrete hydration behavior at its early age using embedded fiber optic temperature sensors.” Doctoral dissertation, Dept. of Civil and Environmental Engineering, Univ. of Massachusetts Lowell.
Chen, Q., X. J. Zhang, W. L. Lim, Y. S. Kwok, and S. Sun. 2019. “High reliability, low latency and cost effective network planning for industrial wireless mesh networks.” IEEE/ACM Trans. Networking 27 (6): 2354–2362. https://doi.org/10.1109/TNET.2019.2947077.
Chung, J., and T. H. Meyer. 2017. “Comparing Kestrel 3000 handheld weather meter measurements of temperature and relative humidity against those of the WEKSLER Sling Psychrometer (Model# 315-1).” Surv. Land Info. Sci. 76 (2): 131–144.
Cohen, M. D., J. Olek, and W. L. Dolch. 1990. “Mechanism of plastic shrinkage cracking in portland cement and portland cement-silica fume paste and mortar.” Cem. Concr. Res. 20 (1): 103–119. https://doi.org/10.1016/0008-8846(90)90121-D.
CSA (Standards Council of Canada). 2014. Concrete materials and methods of concrete construction/test methods and standard practices for concrete. CSA A23.1. Ottawa: CSA.
Day, R., and J. Clarke. 2003. “Plastic and thermal cracking.” Adv. Concr. Technol. 1 (Jan): 3–17. https://doi.org/10.1016/B978-075065686-3/50249-4.
Dzaye, E. D., E. Tsangouri, G. De Schutter, and D. G. Aggelis. 2019. “Full-field settlement measurement at fresh cementitious material by digital image correlation.” J. Adv. Concr. Technol. 17 (4): 168–176. https://doi.org/10.3151/jact.17.168.
Eren, Ö., and K. Marar. 2010. “Effect of steel fibers on plastic shrinkage cracking of normal and high strength concretes.” Mater. Res. 13 (2): 135–141. https://doi.org/10.1590/S1516-14392010000200004.
Espressif. 2021. “ESP8266EX datasheet.” Accessed March 18, 2021. https://www.espressif.com/sites/default/files/documentation/0a-esp8266ex_datasheet_en.pdf.
Ghourchian, S., M. Wyrzykowski, and P. Lura. 2018. “A poromechanics model for plastic shrinkage of fresh cementitious materials.” Cem. Concr. Res. 109 (Jul): 120–132. https://doi.org/10.1016/j.cemconres.2018.04.013.
IS (Indian Standard). 1975. Extreme weather concreting, recommended practice for hot weather concreting. IS 7861-1. New Delhi, India: IS.
John, S. T., B. K. Roy, P. Sarkar, and R. Davis. 2020. “IoT enabled real-time monitoring system for early-age compressive strength of concrete.” J. Constr. Eng. Manage. 146 (2): 05019020. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001754.
Jothi Saravanan, T., K. Balamonica, C. Bharathi Priya, N. Gopalakrishnan, and S. G. N. Murthy. 2017. “Piezoelectric EMI–based monitoring of early strength gain in concrete and damage detection in structural components.” J. Infrastruct. Syst. 23 (4): 04017029. https://doi.org/10.1061/(ASCE)IS.1943-555X.0000386.
Jung, M., M. Park, H.-S. Lee, and H. Kim. 2016. “Weather-delay simulation model based on vertical weather profile for high-rise building construction.” J. Constr. Eng. Manage. 142 (6): 04016007. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001109.
Kayondo, M., R. Combrinck, and W. P. Boshoff. 2019. “State-of-the-art-review on plastic cracking of concrete.” Constr. Build. Mater. 225 (Aug): 886–899. https://doi.org/10.1016/j.conbuildmat.2019.07.197.
Kestrel Met. 2021. “Kestrel concrete pro Jobsite Weather Kit.” Accessed January 9, 2021. https://kestrelmeters.com/products/kestrel-concrete-pro-jobsite-weather-kit.
Kim, J. H., H. J. Yim, and S. H. Kwon. 2014. “Quantitative measurement of the external and internal bleeding of conventional concrete and SCC.” Cem. Concr. Compos. 54 (Jun): 34–39. https://doi.org/10.1016/j.cemconcomp.2014.05.006.
Koehn, E., and G. Brown. 1985. “Climatic effects on construction.” J. Constr. Eng. Manage. 111 (2): 129–137. https://doi.org/10.1061/(ASCE)0733-9364(1985)111:2(129).
Larsson, R., and M. Rudberg. 2019. “Impact of weather conditions on in situ concrete wall operations using a simulation-Based approach.” J. Constr. Eng. Manage. 145 (7): 05019009. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001662.
Lee, H. C., and K. H. Ke. 2018. “Monitoring of large-area IOT sensors using a LoRa wireless mesh network system: Design and evaluation.” IEEE Trans. Instrum. Meas. 67 (9): 2177–2187. https://doi.org/10.1109/TIM.2018.2814082.
Leemann, A., P. Nygaard, and P. Lura. 2014. “Impact of admixtures on the plastic shrinkage cracking of self-compacting concrete.” Cem. Concr. Compos. 46 (Jun): 1–7. https://doi.org/10.1016/j.cemconcomp.2013.11.002.
Lepage, S., M. Baalbaki, É. Dallaire, and P. C. Aïtcin. 1999. “Early shrinkage development in a high performance concrete.” Cem. Concr. Aggregates 21 (1): 31–35. https://doi.org/10.1520/CCA10505J.
Lerch, W. 1957. “Plastic shrinkage.” ACI J. Proc. 53 (44): 797–802. https://doi.org/10.14359/11555.
Li, C. Z., F. Xue, X. Li, J. Hong, and G. Q. Shen. 2018. “An internet of things-enabled BIM platform for on-site assembly services in prefabricated construction.” Autom. Constr. 89 (1): 146–161. https://doi.org/10.1016/j.autcon.2018.01.001.
Matalkah, F., Y. Jaradat, and P. Soroushian. 2019. “Plastic shrinkage cracking and bleeding of concrete prepared with alkali activated cement.” Heliyon 5 (4): 514–516. https://doi.org/10.1016/j.heliyon.2019.e01514.
Maxim Integrated. 2021. “Programmable resolution 1-wire digital thermometer.” Accessed March 18, 2021. https://datasheets.maximintegrated.com/en/ds/DS18B20.pdf.
McCarter, W. J., T. M. Chrisp, G. Starrs, A. Adamson, E. Owens, P. A. M. Basheer, S. V. Nanukuttan, S. Srinivasan, and N. Holmes. 2012. “Developments in performance monitoring of concrete exposed to extreme environments.” J. Infrastruct. Syst. 18 (3): 167–175. https://doi.org/10.1061/(ASCE)IS.1943-555X.0000089.
Menzel, C. A. 1954. Causes and prevention of crack development in plastic concrete, 130–136. Skokie, IL: Portland Cement Association.
Nasir, M., O. S. B. Al-Amoudi, and M. Maslehuddin. 2017. “Effect of placement temperature and curing method on plastic shrinkage of plain and pozzolanic cement concretes under hot weather.” Constr. Build. Mater. 152 (Jul): 943–953. https://doi.org/10.1016/j.conbuildmat.2017.07.068.
NORDTEST. 1995. Concrete: Cracking tendency—Exposure to drying during the first 24 hours. NT Build 433. Espoo, Finland: NORDTEST.
Olivier, G., R. Combrinck, M. Kayondo, and W. P. Boshoff. 2018. “Combined effect of nano-silica, super absorbent polymers, and synthetic fibres on plastic shrinkage cracking in concrete.” Constr. Build. Mater. 192 (10): 85–98. https://doi.org/10.1016/j.conbuildmat.2018.10.102.
OSOYOO. 2021. “DHT-11 humidity & temperature sensor.” Accessed March 18, 2021. https://osoyoo.com/driver/DHT11-datasheet.pdf.
Saliba, J., E. Rozière, F. Grondin, and A. Loukili. 2011. “Influence of shrinkage-reducing admixtures on plastic and long-term shrinkage.” Cem. Concr. Compos. 33 (2): 209–217. https://doi.org/10.1016/j.cemconcomp.2010.10.006.
Sayahi, F. 2017. “Application of ILD2300-10 laser sensor on measuring the vertical displacement of fresh concrete surface.” Tech. Rep. 46 (7): 10–16. https://doi.org/10.13140/RG.2.2.31793.28003.
Slowik, V., M. Schmidt, D. Kässler, and M. Eiserbeck. 2014. “Capillary pressure monitoring in plastic concrete for controlling early-age shrinkage cracking.” Transp. Res. Rec. 2441 (1): 1–5. https://doi.org/10.3141/2441-01.
Syrrakou, C., and G. F. Pinder. 2014. “Experimentally determined evaporation rates in pervious concrete systems.” J. Irrig. Drain. Eng. 140 (1): 04013003. https://doi.org/10.1061/(ASCE)IR.1943-4774.0000652.
Taffese, W. Z., E. Nigussie, and J. Isoaho. 2019. “Internet of things based durability monitoring and assessment of reinforced concrete structures.” Procedia Comput. Sci. 155 (2018): 672–679. https://doi.org/10.1016/j.procs.2019.08.096.
Thatte, G., and U. Mitra. 2008. “Sensor selection and power allocation for distributed estimation in sensor networks: Beyond the star topology.” IEEE Trans. Signal Process. 56 (7): 2649–2661. https://doi.org/10.1109/TSP.2008.917038.
THINGSPEAK. 2021. “ThingSpeak for IoT projects.” Accessed January 9, 2021. https://thingspeak.com/.
Turcry, P., and A. Loukili. 2006. “Evaluation of plastic shrinkage cracking of self-compacting concrete.” ACI Mater. J. Am. Concr. Inst. 103 (4): 272–279.
Uno, P. J. 1998. “Plastic shrinkage cracking and evaporation formulas.” Mater. J. Am. Concr. Inst. 95 (4): 365–375.
Wang, D., B. Ren, B. Cui, J. Wang, X. Wang, and T. Guan. 2021. “Real-time monitoring for vibration quality of fresh concrete using convolutional neural networks and IoT technology.” Autom. Constr. 123 (7): 103510. https://doi.org/10.1016/j.autcon.2020.103510.
Wittmann, F. H. 1976. “On the action of capillary pressure in fresh concrete.” Cem. Concr. Res. 6 (1): 49–56. https://doi.org/10.1016/0008-8846(76)90050-8.
Yim, H. J., J. H. Kim, H. G. Kwak, and J. K. Kim. 2013. “Evaluation of internal bleeding in concrete using a self-weight bleeding test.” Cem. Concr. Res. 53 (Aug): 18–24. https://doi.org/10.1016/j.cemconres.2013.05.015.
Zhong, R. Y., Y. Peng, F. Xue, J. Fang, W. Zou, H. Luo, S. Thomas Ng, W. Lu, G. Q. P. Shen, and G. Q. Huang. 2017. “Prefabricated construction enabled by the Internet-of-Things.” Autom. Constr. 76 (Jul): 59–70. https://doi.org/10.1016/j.autcon.2017.01.006.
Zhou, C., and L. Y. Ding. 2017. “Safety barrier warning system for underground construction sites using internet-of-things technologies.” Autom. Constr. 83 (7): 372–389. https://doi.org/10.1016/j.autcon.2017.07.005.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jun 5, 2021
Accepted: Mar 15, 2023
Published online: May 23, 2023
Published in print: Sep 1, 2023
Discussion open until: Oct 23, 2023
ASCE Technical Topics:
- Concrete
- Concrete slabs
- Construction engineering
- Construction industry
- Construction management
- Engineering materials (by type)
- Evaporation
- Hydrologic engineering
- Infrastructure construction
- Material mechanics
- Material properties
- Materials engineering
- Plastics
- Shrinkage (material)
- Slabs
- Standards and codes
- Structural engineering
- Structural members
- Structural systems
- Synthetic materials
- Water and water resources
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.