Hydrothermal Carbonization of Crude Oil Tank Bottom Sludge for Energy Applications
Publication: Journal of Hazardous, Toxic, and Radioactive Waste
Volume 28, Issue 4
Abstract
Hydrothermal carbonization (HTC) is a promising technology for the conversion of waste biomass into an energy-dense coal-like product known as hydrochar. This study evaluated the application of HTC to generate a renewable solid fuel resource from hazardous oily sludge. The influence of process parameters on the energy characteristics of hydrochar was investigated. A design matrix of 20 experimental HTC runs was used as input for response surface methodology (RSM). The central point for this HTC operation was at a temperature of 200°C, with a duration of 75 min and a concentration of 5.5%. The higher heating value (HHV) increased from 18.18 to 28.7 MJ/kg. A linear correlation was derived between yield and HHV. The influence of process parameters on energy densification and energetic retention properties revealed that energy storage properties were enhanced. In total, 66.6%–80% of energy was retained in hydrochar. The enhancement of the fuel characteristics of hydrochar was demonstrated by the elevated fuel ratio of 0.31 obtained at a temperature of 250°C, thereby indicating the improvement brought about by the HTC process. The quantification of energy losses due to convection and radiation yielded 309 and 1,854 kJ/h, respectively. Maximizing the efficiency of internal heat sources is crucial to conserving energy and reducing costs in HTC.
Practical Applications
The activities of the oil industry have several impacts on the environment due to the large amounts of oily waste generated. Oily sludge is a prevalent hazardous waste generated in the petroleum industry, and effectively treating it remains a key challenge for the petroleum and petrochemical sectors. Hydrothermal carbonization is an important thermochemical conversion process that can be used as an energy-efficient alternative to enhance the dewaterability of sludge and meanwhile to convert sludge into high-value-added products, such as clean biofuel, organic fertilizers, and precursors of functional materials. Optimizing the process conditions is essential to successfully implement the HTC processing of oily sludge in real field conditions. In this study, waste oily sludge was converted to an energy-rich product, namely, hydrochar. For this, the study investigated the hydrochar characteristics for hydrothermal conditions including a reaction temperature of 175°C–250°C, a reaction time of 30–120 min, and a solid load of 3%–8%. The study also found that the majority of energy loss occurred during the cooling process and therefore suggests that this process might be operated as a continuous process rather than a batch process.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and codes generated or used during the study appear in the published article.
Acknowledgments
The corresponding author acknowledges the financial support from Anna Centenary Fellowship for carrying out this work.
Author contributions: Leena Pauline: Conceptualization, Methodology, Validation, Formal analysis, Investigation, Data curation, Writing—original draft, Writing—review and editing, Visualization. Kurian Joseph: Conceptualization, Validation, Resources, Writing—review and editing, Supervision, Funding acquisition, Project administration.
References
Berge, N. D., K. S. Ro, J. Mao, J. R. V. Flora, M. A. Chappell, and S. Bae. 2011. “Hydrothermal carbonization of municipal waste streams.” Environ. Sci. Technol. 45 (13): 5696–5703. https://doi.org/10.1021/es2004528.
Cai, C., and Y. Wang. 2009. “Novel nanocomposite materials for advanced li-ion rechargeable batteries.” Materials 2 (3): 1205–1238. https://doi.org/10.3390/ma2031205.
Carr, A. G., R. Mammucari, and N. R. Foster. 2011. “A review of subcritical water as a solvent and its utilisation for the processing of hydrophobic organic compounds.” Chem. Eng. J. 172 (1): 1–17. https://doi.org/10.1016/j.cej.2011.06.007.
Coym, J. W., and J. G. Dorsey. 2004. “Superheated water chromatography: A brief review of an emerging technique.” Anal. Lett. 37 (5): 1013–1023. https://doi.org/10.1081/AL-120030294.
Danso-Boateng, E., G. Shama, A. D. Wheatley, S. J. Martin, and R. G. Holdich. 2015. “Hydrothermal carbonisation of sewage sludge: Effect of process conditions on product characteristics and methane production.” Bioresour. Technol. 177: 318–327. https://doi.org/10.1016/j.biortech.2014.11.096.
EI (Energy Institute). 2020. Statistical review of world energy. 69th ed. London: BP.
Fang, J., B. Gao, J. Chen, and A. R. Zimmerman. 2015. “Hydrochars derived from plant biomass under various conditions: Characterization and potential applications and impacts.” Chem. Eng. J. 267: 253–259. https://doi.org/10.1016/j.cej.2015.01.026.
Fiori, L., D. Basso, D. Castello, and M. Baratieri. 2014. “Hydrothermal carbonization of biomass: Design of a batch reactor and preliminary experimental results.” Chem. Eng. Trans. 37: 55–60. https://doi.org/10.3303/CET1437010.
Gao, N., X. Jia, G. Gao, Z. Ma, C. Quan, and S. Raza. 2020a. “Modeling and simulation of coupled pyrolysis and gasification of oily sludge in a rotary kiln.” Fuel 279: 118152. https://doi.org/10.1016/j.fuel.2020.118152.
Gao, N., J. Li, C. Quan, and H. Tan. 2020b. “Product property and environmental risk assessment of heavy metals during pyrolysis of oily sludge with fly ash additive.” Fuel 266: 117090. https://doi.org/10.1016/j.fuel.2020.117090.
Gao, N., J. Li, C. Quan, X. Wang, and Y. Yang. 2020c. “Oily sludge catalytic pyrolysis combined with fine particle removal using a Ni-ceramic membrane.” Fuel 277: 118134. https://doi.org/10.1016/j.fuel.2020.118134.
Gao, P., Y. Zhou, F. Meng, Y. Zhang, Z. Liu, W. Zhang, and G. Xue. 2016. “Preparation and characterization of hydrochar from waste eucalyptus bark by hydrothermal carbonization.” Energy 97: 238–245. https://doi.org/10.1016/j.energy.2015.12.123.
Geniesse, J. C., and R. Reuter. 1930. “Effect of time and temperature on the cracking of oils.” J. Ind. Eng. Chem. 22 (12): 1274–1279. https://doi.org/10.1021/ie50252a008.
Hoekman, S. K., A. Broch, and C. Robbins. 2011. “Hydrothermal carbonization (HTC) of lignocellulosic biomass.” Energy Fuels 25 (4): 1802–1810. https://doi.org/10.1021/ef101745n.
Hu, G., J. Li, and G. Zeng. 2013. “Recent development in the treatment of oily sludge from petroleum industry: A review.” J. Hazard. Mater. 261: 470–490. https://doi.org/10.1016/j.jhazmat.2013.07.069.
Hwang, I.-H., H. Aoyama, T. Matsuto, T. Nakagishi, and T. Matsuo. 2012. “Recovery of solid fuel from municipal solid waste by hydrothermal treatment using subcritical water.” Waste Manage. (Oxford) 32 (3): 410–416. https://doi.org/10.1016/j.wasman.2011.10.006.
Islam, A., M. J. Ahmed, W. A. Khanday, M. Asif, and B. H. Hameed. 2017. “Mesoporous activated coconut shell-derived hydrochar prepared via hydrothermal carbonization-NaOH activation for methylene blue adsorption.” J. Environ. Manage. 203: 237–244. https://doi.org/10.1016/j.jenvman.2017.07.029.
Jasmine, J., and S. Mukherji. 2019. “Impact of bioremediation strategies on slurry phase treatment of aged oily sludge from a refinery.” J. Environ. Manage. 246: 625–635. https://doi.org/10.1016/j.jenvman.2019.06.029.
Johnson, O. A., and A. C. Affam. 2019. “Petroleum sludge treatment and disposal: A review.” Environ. Eng. Res. 24 (2): 191–201. https://doi.org/10.4491/eer.2018.134.
Kannan, S., Y. Gariepy, and G. S. V. Raghavan. 2017. “Optimization and characterization of hydrochar produced from microwave hydrothermal carbonization of fish waste.” Waste Manage. (Oxford) 65: 159–168. https://doi.org/10.1016/j.wasman.2017.04.016.
Kim, D., K. Lee, and K. Y. Park. 2014. “Hydrothermal carbonization of anaerobically digested sludge for solid fuel production and energy recovery.” Fuel 130: 120–125. https://doi.org/10.1016/j.fuel.2014.04.030.
Kim, D., K. Lee, and K. Y. Park. 2016. “Upgrading the characteristics of biochar from cellulose, lignin, and xylan for solid biofuel production from biomass by hydrothermal carbonization.” J. Ind. Eng. Chem. 42: 95–100. https://doi.org/10.1016/j.jiec.2016.07.037.
Li, J., F. Lin, K. Li, F. Zheng, B. Yan, L. Che, W. Tian, G. Chen, and K. Yoshikawa. 2021. “A critical review on energy recovery and non-hazardous disposal of oily sludge from petroleum industry by pyrolysis.” J. Hazard. Mater. 406: 124706. https://doi.org/10.1016/j.jhazmat.2020.124706.
Li, L., R. Diederick, J. R. V. Flora, and N. D. Berge. 2013. “Hydrothermal carbonization of food waste and associated packaging materials for energy source generation.” Waste Manage. (Oxford) 33 (11): 2478–2492. https://doi.org/10.1016/j.wasman.2013.05.025.
Li, L., M. Hale, P. Olsen, and N. D. Berge. 2014. “Using liquid waste streams as the moisture source during the hydrothermal carbonization of municipal solid wastes.” Waste Manage. (Oxford) 34 (11): 2185–2195. https://doi.org/10.1016/j.wasman.2014.06.024.
Li, Y., S. Xu, X. Wu, J. Yu, Y. Wang, Y.-S. Hu, H. Li, L. Chen, and X. Huang. 2015. “Amorphous monodispersed hard carbon micro-spherules derived from biomass as a high performance negative electrode material for sodium-ion batteries.” J. Mater. Chem. A 3 (1): 71–77. https://doi.org/10.1039/c4ta05451b.
Libra, J. A., et al. 2011. “Hydrothermal carbonization of biomass residuals: A comparative review of the chemistry, processes and applications of wet and dry pyrolysis.” Biofuels 2: 71–106. https://doi.org/10.4155/bfs.10.81.
Liu, W.-J., Z.-G. Shao, and Y. Xu. 2021. “Emission characteristics of nitrogen and sulfur containing pollutants during the pyrolysis of oily sludge with and without catalysis.” J. Hazard. Mater. 401: 123820. https://doi.org/10.1016/j.jhazmat.2020.123820.
Lu, X., J. R. V. Flora, and N. D. Berge. 2014. “Influence of process water quality on hydrothermal carbonization of cellulose.” Bioresour. Technol. 154: 229–239. https://doi.org/10.1016/j.biortech.2013.11.069.
Lu, X., X. Ma, X. Chen, Z. Yao, and C. Zhang. 2020. “Co-hydrothermal carbonization of polyvinyl chloride and corncob for clean solid fuel production.” Bioresour. Technol. 301: 122763. https://doi.org/10.1016/j.biortech.2020.122763.
Lu, X., P. J. Pellechia, J. R. V. Flora, and N. D. Berge. 2013. “Influence of reaction time and temperature on product formation and characteristics associated with the hydrothermal carbonization of cellulose.” Bioresour. Technol. 138: 180–190. https://doi.org/10.1016/j.biortech.2013.03.163.
Lucian, M., and L. Fiori. 2017. “Hydrothermal carbonization of waste biomass: Process design, modeling, energy efficiency and cost analysis.” Energies 10 (2): 211. https://doi.org/10.3390/en10020211.
Makut, B. B., G. Goswami, and D. Das. 2022. “Evaluation of bio-crude oil through hydrothermal liquefaction of microalgae-bacteria consortium grown in open pond using wastewater.” Biomass Convers. Biorefin. 12 (7): 2567–2581. https://doi.org/10.1007/s13399-020-00795-x.
MoPNG (Ministry of Petroleum and Natural Gas). 2020. Ministry of petroleum and natural gas economic and statisitcs division, production report. New Delhi, India: Ministry of Petroleum and Natural Gas.
Nwankwo, C. A., and V. E. Amah. 2013. “Estimating energy content of municipal solid waste by multiple regression analysis.” Int. J. Sci. Res. 5 (6): 2319–7064. https://doi.org/10.21275/v5i6.NOV164100.
Pala, M., I. C. Kantarli, H. B. Buyukisik, and J. Yanik. 2014. “Hydrothermal carbonization and torrefaction of grape pomace: A comparative evaluation.” Bioresour. Technol. 161: 255–262. https://doi.org/10.1016/j.biortech.2014.03.052.
Parshetti, G. K., S. K. Hoekman, and R. Balasubramanian. 2013a. “Chemical, structural and combustion characteristics of carbonaceous products obtained by hydrothermal carbonization of palm empty fruit bunches.” Bioresour. Technol. 135: 683–689. https://doi.org/10.1016/j.biortech.2012.09.042.
Parshetti, G. K., Z. Liu, A. Jain, M. P. Srinivasan, and R. Balasubramanian. 2013b. “Hydrothermal carbonization of sewage sludge for energy production with coal.” Fuel 111: 201–210. https://doi.org/10.1016/j.fuel.2013.04.052.
Peterson, A. A., F. Vogel, R. P. Lachance, M. Fröling, M. J. Antal, and J. W. Tester. 2008. “Thermochemical biofuel production in hydrothermal media: A review of sub- and supercritical water technologies.” Energy Environ. Sci. 1 (1): 32–65. https://doi.org/10.1039/b810100k.
Petrović, J., N. Perišić, J. D. Maksimović, V. Maksimović, M. Kragović, M. Stojanović, M. Laušević, and M. Mihajlović. 2016. “Hydrothermal conversion of grape pomace: Detailed characterization of obtained hydrochar and liquid phase.” J. Anal. Appl. Pyrolysis 118: 267–277. https://doi.org/10.1016/j.jaap.2016.02.010.
Poerschmann, J., B. Weiner, H. Wedwitschka, A. Zehnsdorf, R. Koehler, and F.-D. Kopinke. 2015. “Characterization of biochars and dissolved organic matter phases obtained upon hydrothermal carbonization of Elodea nuttallii.” Bioresour. Technol. 189: 145–153. https://doi.org/10.1016/j.biortech.2015.03.146.
Qin, L., J. Han, X. He, Y. Zhan, and F. Yu. 2015. “Recovery of energy and iron from oily sludge pyrolysis in a fluidized bed reactor.” J. Environ. Manage. 154: 177–182. https://doi.org/10.1016/j.jenvman.2015.02.030.
Reza, M. T., C. Coronella, K. M. Holtman, D. Franqui-Villanueva, and S. R. Poulson. 2016. “Hydrothermal carbonization of autoclaved municipal solid waste pulp and anaerobically treated pulp digestate.” ACS Sustainable Chem. Eng. 4 (7): 3649–3658. https://doi.org/10.1021/acssuschemeng.6b00160.
Román, S., J. M. V. Nabais, C. Laginhas, B. Ledesma, and J. F. González. 2012. “Hydrothermal carbonization as an effective way of densifying the energy content of biomass.” Fuel Process. Technol. 103: 78–83. https://doi.org/10.1016/j.fuproc.2011.11.009.
Sevilla, M., and A. B. Fuertes. 2009. “The production of carbon materials by hydrothermal carbonization of cellulose.” Carbon 47 (9): 2281–2289. https://doi.org/10.1016/j.carbon.2009.04.026.
Spitzer, R. Y., V. Mau, and A. Gross. 2018. “Using hydrothermal carbonization for sustainable treatment and reuse of human excreta.” J. Cleaner Prod. 205: 955–963. https://doi.org/10.1016/j.jclepro.2018.09.126.
Sun, X., and Y. Li. 2004. “Ga2o3 and GaN semiconductor hollow spheres.” Angew. Chem. Int. Ed. 43 (29): 3827–3831. https://doi.org/10.1002/anie.200353212.
Tang, J., X. Lu, Q. Sun, and W. Zhu. 2012. “Aging effect of petroleum hydrocarbons in soil under different attenuation conditions.” Agric. Ecosyst. Environ. 149: 109–117. https://doi.org/10.1016/j.agee.2011.12.020.
Titirici, M. M., A. Thomas, S.-H. Yu, J.-O. Müller, and M. Antonietti. 2007. “A direct synthesis of mesoporous carbons with bicontinuous pore morphology from crude plant material by hydrothermal carbonization.” Chem. Mater. 19 (17): 4205–4212. https://doi.org/10.1021/cm0707408.
Vittinghoff, E., D. Glidden, S. Shiboski, and C. McCulloch. 2012. Regression methods in biostatistics: Linear, logistic, survival, and repeated measures models. 2nd ed. San Francisco, CA: Springer.
Yao, C., Y. Shin, L. Q. Wang, C. F. Windisch, W. D. Samuels, B. W. Arey, C. Wang, W. M. Risen, and G. J. Exarhos. 2007. “Hydrothermal dehydration of aqueous fructose solutions in a closed system.” J. Phys. Chem. C 111 (42): 15141–15145. https://doi.org/10.1021/jp074188l.
Zhai, Y., C. Peng, B. Xu, T. Wang, C. Li, G. Zeng, and Y. Zhu. 2017. “Hydrothermal carbonisation of sewage sludge for char production with different waste biomass: Effects of reaction temperature and energy recycling.” Energy 127: 167–174. https://doi.org/10.1016/j.energy.2017.03.116.
Zhang, J., G. Li, and A. Borrion. 2021. “Life cycle assessment of electricity generation from sugarcane bagasse hydrochar produced by microwave assisted hydrothermal carbonization.” J. Cleaner Prod. 291: 125980. https://doi.org/10.1016/j.jclepro.2021.125980.
Zhang, X., L. Zhang, and A. Li. 2017. “Hydrothermal co-carbonization of sewage sludge and pinewood sawdust for nutrient-rich hydrochar production: Synergistic effects and products characterization.” J. Environ. Manage. 201: 52–62. https://doi.org/10.1016/j.jenvman.2017.06.018.
Zhao, P., Y. Shen, S. Ge, and K. Yoshikawa. 2014. “Energy recycling from sewage sludge by producing solid biofuel with hydrothermal carbonization.” Energy Convers. Manage. 78: 815–821. https://doi.org/10.1016/j.enconman.2013.11.026.
Zhou, S., H. Liang, L. Han, G. Huang, and Z. Yang. 2019. “The influence of manure feedstock, slow pyrolysis, and hydrothermal temperature on manure thermochemical and combustion properties.” Waste Manage. (Oxford) 88: 85–95. https://doi.org/10.1016/j.wasman.2019.03.025.
Information & Authors
Information
Published In
Journal of Hazardous, Toxic, and Radioactive Waste
Volume 28 • Issue 4 • October 2024
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Dec 7, 2023
Accepted: Mar 29, 2024
Published online: May 29, 2024
Published in print: Oct 1, 2024
Discussion open until: Oct 29, 2024
ASCE Technical Topics:
- Energy conversion
- Energy efficiency
- Energy engineering
- Energy sources (by type)
- Engineering fundamentals
- Environmental engineering
- Fuels
- Hydro power
- Mathematics
- Measurement (by type)
- Non-renewable energy
- Parameters (statistics)
- Pollutants
- Renewable energy
- Sludge
- Statistics
- Temperature effects
- Temperature measurement
- Wastes
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.