Philip G. Hubbard, Developer of the Hot-Film Anemometer for Measuring Velocity of Turbulent Water Flow
Publication: Journal of Hydraulic Engineering
Volume 150, Issue 2
Abstract
Forum papers are thought-provoking opinion pieces or essays founded in fact, sometimes containing speculation, on a civil engineering topic of general interest and relevance to the readership of the journal. The views expressed in this Forum article do not necessarily reflect the views of ASCE or the Editorial Board of the journal.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
No data, models, or code were generated or used during the study.
Acknowledgments
The author thanks Peter D. Hubbard (son of Philip G. Hubbard), Suzanne Kennedy (daughter of former IIHR Director John Fisher Kennedy), and Marian Muste (of IIHR) for guidance in writing this article. Larry Weber and Troy Lyons (current IIHR director and associate director, respectively) encouraged preparation of this forum article. Also, many thanks are due to the article’s two reviewers—their suggestions helped steer the article’s narrative.
References
Aaron, G. 1960. “Decay of turbulent wakes behind a propeller.” M.S. thesis, Dept. of Mechanics and Hydraulics, State Univ. of Iowa.
Aberle, J., C. Rennie, D. Admiraal, and M. Muste. 2020. Experimental hydraulics: Methods, instrumentation, data processing and management. Vol. II: Instrumentation and measurement techniques. London: Taylor & Francis.
Addison, H. 1946. Hydraulic measurements. 2nd ed. New York: Wiley.
Albertson, M. L., Y. B. Lai, R. A. Jensen, and H. Rouse. 1948. “Diffusion of submerged jets.” Trans. ASCE 115 (1): 639–664.
Appel, D. W. 1949. “The development of a turbulence Pitot for use in water.” M.S. thesis, Dept. of Mechanics and Hydraulics, State Univ. of Iowa.
Baily, C., and G. Comte-Bellot. 2015. Turbulence. London: Springer.
Bankoff, S. G., and R. S. Rosler. 1962. “Constant-temperature hot-film anemometer as a tool in liquid turbulence measurements.” Rev. Sci. Instrum. 33 (11): 1209–1212. https://doi.org/10.1063/1.1717730.
Bradshaw, P. 1971. An introduction to turbulence and its measurement. Oxford, UK: Pergamon Press.
Bradshaw, P. ed. 1976. “Turbulence.” Vol. 12 of Topics in applied physics. Berlin: Springer.
Bruun, H. H. 1996. “Hot-film anemometry in liquid flows.” Meas. Sci. Technol. 7 (Mar): 1301–1312. https://doi.org/10.1088/0957-0233/7/10/003.
Chaix, B. 1966. Essais relatifs a l’influence de la turbulence sur les vitesses indiquées par different moulinets hydrométiques. Rep. No. 66-15. Vicksburg, MS: USACE.
Chen, C.-N. 1964. “Turbulence studies in the wake behind a powered surface vessel.” M.S. thesis, Dept. of Mechanics and Hydraulics, Univ. of Iowa.
Chevray, R. 1967. “Turbulence in the wake of body of revolution.” Ph.D. thesis, Dept. of Mechanics and Hydraulics, Univ. of Iowa.
Comte-Bellot, G. 1975. “The physical background for hot-film anemometry.” In Proc., Symp. on Turbulence in Liquids, 1–13. Rolla, MO: Univ. of Missouri.
Daily Iowan. 1965. “Regents name deans to 2 vacant positions.” Daily Iowan. Accessed December 11, 1965. https://dailyiowan.lib.uiowa.edu/DI/1965/di1965-12-11.pdf.
Dantec. 2023. “Fluid mechanics.” Accessed February 15, 2023. https://www.dantecdynamics.com/solutions/fluid-mechanics/.
Dawson, F. M., and A. A. Kalinske. 1937. Hydraulics and pneumatics of plumbing drainage systems. Washington, DC: National Association of Master Plumbers.
Dawson, F. M., and A. A. Kalinske. 1939. “Methods for calculating water-hammer pressures.” J. Am. Water Works Assoc. 31 (11): 1835–1864. https://doi.org/10.1002/j.1551-8833.1939.tb12933.x.
Dryden, H. L., and A. M. Kuethe. 1929. The effect of turbulence in wind tunnel measurements. Washington, DC: US Bureau of Standards.
Dryden, H. L., T. von Kármán, A. A. Kalinske, T. K. Sherwood, S. S. Wilks, W. A. Shewhart, L. L. Simon, and R. Pound. 1941. Fluid mechanics and statistical methods in engineering. Philadelphia: Pennsylvania Press.
Eckelmann, H. 1988. Hot-film and hot-wire anemometers. Edited by A. Müller. Boca Raton, FL: CRC Press.
Fingerson, L. M., and P. Freymuth. 1996. “Thermal anemometers.” Chap. 3 in Fluid mechanics measurements, edited by R. Goldstein. New York: Routledge.
Freeman, J. R. 1929. Hydraulic laboratory practice. New York: ASME.
Freymuth, L. M. 1983. “The history of thermal anemometry.” Chap. 4 in Handbook of fluids in motion, edited by N. P. Cheremisinoff and R. Gupta, 79–91. Ann Arbor, MI: Ann Arbor Science.
Gaster, M. 1966. The application of hot-film gauges to the detection of boundary-layer transitions in flight. Cranfield, UK: College of Aeronautics.
Gear, P. J. L. 1965. “An experimental study of the turbulence in the wake of a body of evolution.” Ph.D. thesis, Dept. of Mechanics and Hydraulics, Univ. of Iowa.
Glover, J. R. 1961. “Transistorized hot-wire anemometer and linearizing circuit.” M.S. thesis, Dept. of Mechanics and Hydraulics, Univ. of Iowa.
Glover, J. R. 1965. “Techniques for detecting and analyzing unsteady-flow variables.” Ph.D. thesis, Dept. of Mechanics and Hydraulics, Univ. of Iowa.
Goldstein, R. J. 1996. Fluid mechanics measurements. 2nd ed. Philadelphia: Taylor & Francis Group.
Grinnell, S. W. 1946. The application of electronics to hydraulic research. In Proc., 3rd Hydraulics Conf., 13–18. Iowa City, IA: State Univ. of Iowa.
Groat, B. F. 1913. “Characteristics of cup and screw current meters: Performance of these meters in tailraces and large mountain streams; statistical synthesis of discharge curves.” Trans. ASCE 76 (1): 819–840.
Grossman, L. M., H. Li, and H. A. Einstein. 1957. “Turbulence in civil engineering: Investigations in liquid shear flow by electromagnetic induction.” J. Hydraul. Div. 83 (5): 1–10.
Hasse, L., and M. Dunckel. 1980. “Hot wire and hot film anemometers.” In Air-sea interactions: Instruments and methods, edited by F. Dobson, L. Hasse, and R. Davis, 47–63. New York: Plenum Press.
Hinze, J. 1975. Turbulence. 2nd ed. New York: McGraw-Hill.
Howe, J. W. 1950. “Flow measurement.” Chap. 3 in Engineering hydraulics, edited by H. Rouse. New York: Wiley.
Hsu, S.-T. 1966. “Factors affecting the stability of hot-wire velocity sensors in liquids.” M.S. thesis, Dept. of Mechanics and Hydraulics, State Univ. of Iowa.
Hubbard, P. G. 1948. “Application of a DC negative-feedback amplifier to compensate for the thermal lag of a hot-wire anemometer.” In Vol. 4 of Proc., National Electronics Conf., E. Chicago: National Engineering Conference.
Hubbard, P. G. 1949a. “Application of the electrical analogy in fluid mechanics research.” Rev. Sci. Instrum. 20 (11): 802–807. https://doi.org/10.1063/1.1741394.
Hubbard, P. G. 1949b. “A constant-temperature hot-wire anemometer for use in air.” M.S. thesis, Dept. of Mechanics and Hydraulics, State Univ. of Iowa.
Hubbard, P. G. 1954. “Constant-temperature hot-wire anemometry with application to measurements in water.” Ph.D. thesis, Dept. of Mechanics and Hydraulics, Univ. of Iowa.
Hubbard, P. G. 1955. “Field measurement of bridge-pier scour.” In Vol. 34 of Proc., Highway Research Board, 184–188. Ames, IA: Iowa Dept. of Transportation.
Hubbard, P. G. 1957. Operating manual for the IIHR hot wire and hot-film anemometers. Iowa City, IA: State Univ. of Iowa.
Hubbard, P. G. 1959. “Discussion of ‘Turbulence characteristics of the hydraulic jump’ by Rouse, H., Siao, T. T. and Nagaratnam, S.” Trans. ASCE 124 (1): 962–964.
Hubbard, P. G. 1961. “Métedos modernos de la medida en mecánica de fluidos.” In Book Fundamentos de la mecánica de fluidos, edited by E. O. Macagno. Buenos Aires, Argentina: National Council for Scientific and Technical Research.
Hubbard, P. G. 1962. “Interpretation of data and response or probes in unsteady flow.” In Proc., ASME Symp. on Measurement in Unsteady Flow, 3–8. New York: ASME.
Hubbard, P. G. 1996. New dawns: A 150-year look at human rights at The University of Iowa. Iowa City, IA: University of Iowa Press.
Hubbard, P. G. 1999. My Iowa journey: The life story of the University of Iowa’ s first African American professor. Iowa City, IA: University of Iowa Press.
Hubbard, P. G., and S.-C. Ling. 1953. “Hydrodynamic problems in three dimensions.” Trans. ASCE 118 (1): 1046–1054.
Humphrey, R. L. 1969. “Bibliography of hot wire-film anemometry in liquids.” In Proc., Symp. on Turbulence Measurements in Liquids, 69–71. Rolla, MO: Univ. of Missouri.
Hung, C. Y. 1966. “Optimum traversing speeds for measurement of zones of turbulence.” M.S. thesis, Dept. of Mechanics and Hydraulics, Univ. of Iowa.
Iamandi, C., and H. Rouse. 1969. “Jet-induced circulation and diffusion.” J. Hydraul. Div. 95 (2): 589–602. https://doi.org/10.1061/JYCEAJ.0002025.
Instrument and Apparatus News. 1953. Editorial. Pittsburgh: Instrument Society of America.
Instrument and Apparatus News. 1954. Editorial. Pittsburgh: Instrument Society of America.
Ippen, A. T., and F. Raichlen. 1957. “Turbulence in civil engineering: Measurements in free surface streams.” J. Hydraul. Div. 83 (5): 1–27.
Izzard, C. F. 1940. “Practical hydraulics in highway engineering.” M.S. thesis, Dept. of Mechanics and Hydraulics, State Univ. of Iowa.
Kalinske, A. A. 1940. “Relation of the statistical theory of turbulence to hydraulics.” Trans. ASCE 105 (1): 1547–1566.
Kalinske, A. A. 1946. “Conversion of kinetic to potential energy in flow expansions.” Trans. ASCE 111 (1): 389–390.
Kennedy, J. F., and E. O. Macagno. 1987. “Hunter Rouse, hydraulician.” In Hydraulics and hydraulic research: A historical review, edited by G. Garbrecht. Rotterdam, Netherlands: A. A. Balkema.
King, L. V. 1914. “On the convection of heat from small cylinders in a stream of fluid: Determination of convection constants of small platinum wires, with applications to hot-wire anemometry.” Philos. Trans. R. Soc. London, Ser. A 214 (Jan): 373–432.
Kline, J. S. 1960. “Heat-transfer characteristics of hot-film sensing element used in flow measurement.” ASME J. Basic Eng. 82 (3): 633–634. https://doi.org/10.1115/1.3662680.
Knapp, R. T., J. W. Daily, and F. G. Hammitt. 1970. Cavitation. New York: McGraw-Hill.
Kuo, A. Y. 1965. “Heat transfer from fine wires in flowing liquids.” M.S. thesis, Dept. of Mechanics and Hydraulics, Univ. of Iowa.
Lamb, H. 1945. Hydrodynamics. New York: Dover.
Landweber, L., and P. G. Hubbard. eds. 1955. Proceedings of the sixth hydraulics conference. Iowa City, IA: State Univ of Iowa.
Lane, E. W., F. B. Campbell, and W. H. Price. 1934. The flow net and the electric analogy. Denver: US Department of Interior, Bureau of Reclamation.
Lief, N. P., and L. R. Saentran. 1983. “Hot-film measurements in a water tunnel.” J. Hydraul. Res. 21 (5): 379–387. https://doi.org/10.1080/00221688309499459.
Ling, S.-C. 1955. “Measurement of flow characteristics by the hot film technique.” Ph.D. thesis, Dept. of Mechanics and Hydraulics, Univ. of Iowa.
Ling, S.-C. 1960. “Heat-transfer characteristics of hot-film sensing element used in flow measurement.” J. Basic Eng. 82 (3): 629–633. https://doi.org/10.1115/1.3662679.
Ling, S.-C., and P. G. Hubbard. 1956. “The hot-film anemometer: A new device for fluid mechanics research.” J. Aeronaut. Sci. 23 (9): 890–891.
Locher, F. A. 1965. “A preliminary investigation of the pressure fluctuations in the vicinity of normal walls.” M.S. thesis, Dept. of Mechanics and Hydraulics, Univ. of Iowa.
Lowry, E. M., Jr. 1951. “Turbulence studies from recordings of instantaneous Pitot tube pressures.” M.S. thesis, Dept. of Civil Engineering, Massachusetts Institute of Technology.
Macagno, E. O., and P. G. Hubbard. 1962. “Creation of national centers of scientific instrumentation in Latin America.” In Proc., Int. Seminar of Hydraulics and Fluid Mechanics. Paper II-2, Section 2. Santiago, Chile: Univ. of Santiago de Chile.
Macagno, E. O., D. O. Moran, and D. W. McDougall. 1971. The first half century of hydraulic research at The University of Iowa. Iowa City, IA: University of Iowa Press.
Macovsky, M. S. 1948. The measurement of turbulence in water. Washington, DC: Navy Department, David W. Taylor Model Basin.
McKeon, B. J., J. Li, W. Jiang, J. F. Morrison, and A. J. Smits. 2003. “Pitot probe corrections in fully developed turbulent pipe flow.” Meas. Sci. Technol. 14 (8): 1449–1458. https://doi.org/10.1088/0957-0233/14/8/334.
McQuivey, R. S. 1973. “Principles and measuring techniques of turbulence characteristics in open-channel flows.” In Geological survey professional paper 802-A. Washington, DC: Government Printing Office.
McQuivey, R. S., and E. V. Richardson. 1969. “Some turbulence measurements in open-channel flow.” J. Hydraul. Div. 95 (1): 209–224. https://doi.org/10.1061/JYCEAJ.0001935.
Melville, B. W., and A. J. Raudkivi. 1977. “Flow characteristics in local scour at bridge piers.” J. Hydraul. Res. 15 (4): 373–380. https://doi.org/10.1080/00221687709499641.
Miller, J. A. 1960. “Heat-transfer characteristics of hot-film sensing element used in flow measurement.” J. Basic Eng. 82 (3): 634. https://doi.org/10.1115/1.3662681.
Müller, A. ed. 1988. “Discharge and velocity measurements.” In Proc., IAHR Proc. 2, Section on Hydraulics Instrumentation. Rotterdam, Netherlands: A. A. Balkema.
NASA (National Aeronautics and Space Administration). 1994. Micro-sensor thin-film anemometer. Hampton, VA: Langley Research Center.
Nezu, I., and H. Nakagawa. 1993. “Turbulence in open-channel flow.” IAHR monograph. Rotterdam, Netherlands: A. A. Balkema.
Nyquist, H. 1932. “Regeneration theory.” Bell Syst. Tech. J. 11 (1): 126–147. https://doi.org/10.1002/j.1538-7305.1932.tb02344.x.
Pavlovsky, N. N. 1922. “Experiments on method of electro hydrodynamic analogy.” Chap. 13 of Theory of motion of groundwater under hydrotechnical structures and its basic applications. [In Russian.] Moscow: Scientific Amelioration Institute.
Piret, E. L., W. James, and M. Stacy. 1947. “Heat transmission from fine wires to water: Low velocity data and correlation.” Ind. Eng. Chem. 39 (9): 1098–1103. https://doi.org/10.1021/ie50453a007.
Pope, S. B. 2000. Turbulent flows. Cambridge, UK: Cambridge University Press.
Prandtl, L., and O. G. Tietjens. 1934. Fundamentals of hydro- and aeromechanics. London: Constable.
Rajaratnam, N. 1965. “The hydraulic jump as a wall jet.” J. Hydraul. Div. 91 (5): 107–132. https://doi.org/10.1061/JYCEAJ.0001299.
Relf, E. F. 1924. “LIV: An electrical method for tracing lines in the two-dimensional motion of a perfect fluid.” Philos. Mag. 48 (285): 535–539. https://doi.org/10.1080/14786442408634515.
Resch, F. J. 1969. “Turbulence measurements in water.” In Proc., Symp. on Turbulence in Liquids, 60. Rolla, MO: Univ. of Missouri.
Reynolds, A. J. 1976. Turbulent flows in engineering. New York: Wiley.
Reynolds, O. 1895. “On the dynamical theory of incompressible viscous fluids and the determination of the criterion.” Philos. Trans. R. Soc. A London, Ser. 186 (May): 123–164.
Richardson, E. V., and R. S. McQuivey. 1968. “Measurement of turbulence in water.” J. Hydraul. Div. 94 (2): 411–430. https://doi.org/10.1061/JYCEAJ.0001777.
Robertson, J. M. 1957. “Turbulence in civil engineering: An introduction to three research papers.” J. Hydraul. Div. 83 (5): 1391.
Robertson, J. M. 1965. Hydrodynamics in theory and application. Englewood Cliffs, NJ: Prentice-Hall.
Rodi, W. 2017. “Turbulence modeling and simulation in hydraulics: A historical review.” J. Hydraul. Eng. 143 (5): 03117001. https://doi.org/10.1061/(ASCE)HY.1943-7900.0001288.
Rouse, H. 1937. “Modern concepts of the mechanics of fluid turbulence.” Trans. ASCE 102 (1): 463–505.
Rouse, H. 1938. “Fluid mechanics for hydraulic engineers.” In Engineering monographs. New York: McGraw-Hill.
Rouse, H. ed. 1950. Engineering hydraulics. New York: Wiley.
Rouse, H. 1953. “Cavitation in the mixing zone of a submerged jet.” La Houille Blanche 39 (1): 9–19. https://doi.org/10.1051/lhb/1953014.
Rouse, H. 1954. “Measurement of velocity and pressure fluctuations in the turbulent flow of air and water.” In Riabouchinsky Anniversary. Paris: Ministère de l’Air.
Rouse, H. ed. 1959. Advanced mechanics of fluids. New York: Wiley.
Rouse, H. 1961. Laboratory instruction in the mechanics of fluids. Iowa City, IA: Iowa Institute of Hydraulic Research, Univ. of Iowa.
Rouse, H. 1976. Hydraulics in the United States, 1776–1976. Iowa City, IA: University of Iowa Press.
Rouse, H., and M. M. Hasan. 1949. “Cavitation-free inlets and contractions—Electrical analogy facilitates design problem.” Mech. Eng. 71 (3): 213–216.
Rouse, H., P. G. Hubbard, and A. C. Spengo. 1950. Cavitation of submerged jets. Iowa City, IA: Iowa Institute of Hydraulic Research.
Rouse, H., and V. Jezdinsky. 1966. “Fluctuations of pressure in conduit expansions.” J. Hydraul. Div. 92 (3): 1–12. https://doi.org/10.1061/JYCEAJ.0001448.
Rouse, H., T. T. Siao, and S. Nagaratnam. 1959. “Turbulence characteristics of the hydraulic jump.” Trans. ASCE 124 (1): 926–950.
Sandborn, V. A. 1972. Resistance temperature transducers. Fort Collins, CO: Metrology Press.
Schlicting, H. 1979. Boundary layer theory. New York: McGraw-Hill.
Schroder, E. W., and F. M. Dawson. 1927. Hydraulics. New York: McGraw-Hill.
Seiner, J. M. 1983. The wedge hot-film anemometer in supersonic flow. Hampton, VA: NASA Langley Research Center.
Sheplak, M., E. F. Spina, and C. B. McGinley. 1996. “Progress in hot-film anemometry for hypersonic flow.” Exp. Therm. Fluid Sci. 13 (1): 21–28. https://doi.org/10.1016/0894-1777(96)00001-5.
Staubli, T. 1988. “Propeller-type current meters.” In Discharge and velocity measurements, edited by A. Müller, 95–100. Rotterdam, Netherlands: A. A. Balkema.
Tavoularis, S. 2005. Measurement in fluid mechanics. Cambridge, UK: Cambridge University Press.
Taylor, G. I. 1938. “The spectrum of turbulence.” Proc. R. Soc. London, Ser. A 164 (919): 476–490. https://doi.org/10.1098/rspa.1938.0032.
Thibodeaux, K. G. 1994. Review of literature on the testing of point velocity current meters. Reston, VA: USGS.
TSI (Thermo Systems Instruments). 2023. Thermal anemometry probes. Shoreview, MN: TSI.
Valentine, H. R. 1969. Applied hydrodynamics. London: Butterworth.
White, F. M. 1974. Viscous fluid flow. New York: McGraw-Hill.
Wood, A. B. 1949. “Scientific instruments and apparatus.” Nature 163 (May): 753–755. https://doi.org/10.1038/163753a0.
Yarnell, D. L., and F. A. Nagler. 1931. “Effect of turbulence on the registration of current meters.” Trans. ASCE 95 (1): 788–795. https://doi.org/10.1061/TACEAT.0004312.
Yih, C.-S. 1948. “Free convection due to a point source of heat.” Ph.D. thesis, Dept. of Mechanics and Hydraulics, Univ. of Iowa.
Information & Authors
Information
Published In
Journal of Hydraulic Engineering
Volume 150 • Issue 2 • March 2024
Copyright
© 2023 American Society of Civil Engineers.
History
Received: May 10, 2023
Accepted: Sep 6, 2023
Published online: Nov 23, 2023
Published in print: Mar 1, 2024
Discussion open until: Apr 23, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.