A Framework for Analyzing the Stability of Geosynthetic Reinforced Soil Walls under Unsaturated Conditions

Suction stress is one of the most significant factors affecting the serviceability and stability of soil structures. This study presents a framework for analyzing the stability of geosynthetic reinforced soil (GRS) walls and slopes under unsaturated conditions. An analytical formulation of suction stress-based effective stress was implemented into a limit equilibrium solution, namely, the top-down procedure. The developed framework enables the prediction of the tensile load distribution and connection load between the reinforcement and wall face considering the pullout resistance of reinforcements in GRS walls backfilled with granular and marginal soils under unsaturated conditions. The applicability of the framework was demonstrated by providing an illustrative example followed by three series of parametric studies to understand the effects of pore size distribution, air entry pressure, and infiltration rate on the performance of an unsaturated GRS wall. The results quantify the impact of suction, showing that as it increases, the maximum tensile loads and connection loads decrease while pullout resistance increases. Mostly affected by the suction effect are upper reinforcement layers, where combined effects of reduced tensile load and increased pullout resistance decrease connection load and reinforcement length requirements. The current study strongly discourages counting on the contribution of suction for the design of new GRS walls. The suction value cannot be accurately and reliably determined for the entire lifespan of the GRS wall, and it may decrease or diminish in an uncontrolled and random manner under infiltration. However, by quantifying the effect of suction, the proposed framework in this study provides a valuable tool for analysis purposes, enabling a rigorous interpretation of field-measured reinforcement loads during wall service as well as evaluation of the forensics of failed GRS walls.