Seepage Anomaly Detection via Fiber Optic Distributed Temperature Sensing: Insights from Physical and Numerical Modeling
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 150, Issue 6
Abstract
The principle of detecting seepage anomalies in water-retaining earthen structures through temperature monitoring has yet to gain extensive acceptance in modern field applications. As such, this study demonstrated the practical detection of seepage anomaly from fiber optic distributed temperature sensing (DTS) through physical and numerical modeling. A high-resolution DTS, capturing temperature at a sub-cm interval, was embedded in a laboratory-scale earth dam featuring normal and anomalous seepage conditions (induced by artificial defect). Then, a fluctuating reservoir thermal load was applied, and the internal temperature of the dam was monitored. Evaluation of the temperature lag time showed a quicker detection of temperature changes on the DTS sensing locations traversed by the anomalous seepage flow. The disparity in temperature lag times across the DTS increased significantly when a severe seepage anomaly was induced by systematically channeling the reservoir water directly into the artificial defect through a small tube tapping into the reservoir. Further insight into the heat-seepage interaction was achieved through coupled hydrothermal numerical modeling using COMSOL Multiphysics.
Practical Applications
Numerous dam and levee failures worldwide linked to poor conditions and erosion have caused much damage and loss of life. This study practically demonstrated temperature analysis as a robust indicator for identifying potential issues related to seepage in earthen water infrastructures, such as dams and levees. This methodology facilitates efficient early detection, allowing for proactive intervention to avert potential failures and improve public safety. Moreover, the research findings are expected to lay the groundwork for a proof of concept, cultivating an improved understanding and appreciation of the technique among practicing engineers. Building on the success of this study, future laboratory investigations are planned to explore deeper into seepage-heat interactions and optimize the technique for enhanced practical applications, including determining factors such as the ideal location and embedment depth for the distributed temperature sensing system.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors would like to thank the Nebraska Department of Transportation [NDOT SPR-P1(20) M110] for the partial financial support.
References
Artières, O., S. Bonelli, J.-P. Fabre, C. Guidoux, K. Radzicki, P. Royet, and C. Vedrenne. 2007. “Active and passive defenses against internal erosion.” In Assessment of the risk of internal erosion of water damming structures: Dams, dykes and levees, 235–244. Munich, Germany: Technische Universität München.
ASCE Infrastructure Report Card. 2022. “2021 report card for America’s infrastructure.” Accessed February 8, 2022. https://infrastructurereportcard.org/cat-item/dams/.
ASDSO (Association of State Dam Safety Officials). 2022. “Dam failures and incidents.” Accessed February 10, 2022. https://www.damsafety.org/dam-failures.
Bear, J. 2012. Hydraulics of groundwater. New York: Dover Publications.
Bekele, B., C. Song, J. Eun, and S. Kim. 2023. “Exploratory seepage detection in a laboratory-scale earthen dam based on distributed temperature sensing method.” Geotech. Geol. Eng. 41 (2): 927–942. https://doi.org/10.1007/s10706-022-02315-2.
Bersan, S., A. R. Koelewijn, M. Putti, and P. Simonini. 2019. “Large-scale testing of distributed temperature sensing for early detection of piping.” J. Geotech. Geoenviron. Eng. 145 (9): 04019052. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002058.
Cesali, C., and V. Federico. 2018. “Detection of permeability defects within dams and levees through coupled seepage and heat transport analyses.” In Proc., European Working Group on Internal Erosion, 245–257. Cham, Switzerland: Springer.
COMSOL Multiphysics. 2020a. Heat transfer module, user’s guide. Burlington, MA: COMSOL.
COMSOL Multiphysics. 2020b. Porous media module, user’s guide. Burlington, MA: COMSOL.
Des Tombe, B., B. Schilperoort, and M. Bakker. 2020. “Estimation of temperature and associated uncertainty from fiber-optic Raman-spectrum distributed temperature sensing.” Sensors 20 (Apr): 2235. https://doi.org/10.3390/s20082235.
de Vries, G., A. R. Koelewijn, and V. Hopman. 2012. “IJkdijk Full Scale Underseepage Erosion (Piping) Test: Evaluation of Innovative Sensor Technology.” In Proc., Scour and Erosion. 649–657. Reston, VA: ASCE.
Dornstädter, J. 2013. “Leakage detection in dams—State of the art.” In Proc., 20th SLOCOLD, 77–86111. Ljubljana, Slovenia: Slovenian Committee on Large Dams.
Dornstädter, J., and B. Heinemann. 2010. “In situ detection of internal erosion.” In Proc., 8th ICOLD European Club Symp., 5. Graz, Austria: Technische Universität Graz.
Fabritius, A., B. Heinemann, J. Dornstädter, and T. Trick. 2017. Distributed fiber optic temperature measurement for dam safety monitoring: Current state of the art and further development. Pretoria, South Africa: South African National Committee on Large Dams.
Farthing, M. W., and F. L. Ogden. 2017. “Numerical solution of Richards’ equation: A review of advances and challenges.” Soil Sci. Soc. Am. J. 81 (6): 1257–1269. https://doi.org/10.2136/sssaj2017.02.0058.
Fell, R., and J.-J. Fry. 2007. Internal erosion of dams and their foundations. Aussois, France: CRC Press.
Fell, R., C. F. Wan, J. Cyganiewicz, and M. Foster. 2003. “Time for development of internal erosion and piping in embankment dams.” J. Geotech. Geoenviron. Eng. 129 (4): 307–314. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:4(307).
Foster, M., R. Fell, and M. Spannagle. 2000. “The statistics of embankment dam failures and accidents.” Can. Geotech. J. 37 (5): 1000–1024. https://doi.org/10.1139/t00-030.
Foster, M. A., M. Spannagle, and R. Fell. 1998. Analysis of embankment dam incidents. Sydney, NSW, Australia: School of Civil Engineering, Univ. of New South Wales.
Fry, J. 2016. “Lessons on internal erosion in embankment dams from failures and physical models.” In Proc., 8th Int. Conf. on Scour and Erosion, 41–58. Oxford, UK: CRC Press.
Gee, N., J. Johnson, J. Pierko, and C. Dwyer. 2015. Canal inspection methods literature review. Denver: Research and Development Office, Bureau of Reclamation.
Ghafoori, Y., M. Maček, A. Vidmar, J. Říha, and A. Kryžanowski. 2020. “Analysis of seepage in a laboratory scaled model using passive optical fiber distributed temperature sensor.” Water 12 (2): 367. https://doi.org/10.3390/w12020367.
Glisic, B., and D. Inaudi. 2008. Fibre optic methods for structural health monitoring. New York: Wiley.
Goltz, M., M. Aufleger, J. Dornstädter, and O. Mangarovski. 2011. “Distributed fiber optic temperature measurements in embankment dams with central core–new benchmark for seepage monitoring.” In Proc., Symp. SLOCOLD-MACOLD, 123–132. Ljubljana, Slovenia: Slovenian Committee on Large Dams.
Hartog, A. H. 2017. An introduction to distributed optical fibre sensors. Boca Raton, FL: CRC Press.
Huysmans, M., and A. Dassargues. 2005. “Review of the use of Péclet numbers to determine the relative importance of advection and diffusion in low permeability environments.” Hydrogeol. J. 13 (5): 895–904. https://doi.org/10.1007/s10040-004-0387-4.
ICOLD (International Commission on Large Dams). 2017. Bulletin 164: Internal erosion of existing dams, levees, and dikes, and their foundations. Paris: ICOLD.
Inaudi, D., and B. Glisic. 2007. “Distributed fiber optic sensors: Novel tools for the monitoring of large structures.” Geotech. News 25 (3): 31–35.
Incropera, F. P., D. P. Dewitt, T. L. Bergman, and A. S. Lavine. 2007. Fundamentals of heat and mass transfer. Hoboken, NJ: Wiley.
Johansson, S. 1997. “Seepage monitoring in embankment dams.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Institutionen för anläggning och miljö.
Kappelmeyer, O. 1957. “The use of near surface temperature measurements for discovering anomalies due to causes at depths.” Geophys. Prospect. 5 (3): 239–258. https://doi.org/10.1111/j.1365-2478.1957.tb01431.x.
Kechavarzi, C., K. Soga, N. De Battista, L. Pelecanos, M. Elshafie, and R. Mair. 2016. Distributed fibre optic strain sensing for monitoring civil infrastructure. London: ICE Publishing.
Kosky, P., R. Balmer, W. Keat, and G. Wise. 2013. Exploring engineering: An introduction to engineering and design. Boston: Academic Press.
Loupos, K., and A. Amditis. 2017. “Structural health monitoring fiber optic sensors.” In Fiber optic sensors: Current status and future possibilities, smart sensors, measurement and instrumentation, edited by I. R. Matias, S. Ikezawa, and J. Corres, 185–206. Cham, Switzerland: Springer.
Maughan, S. M., H. H. Kee, and T. P. Newson. 2001. “Simultaneous distributed fibre temperature and strain sensor using microwave coherent detection of spontaneous Brillouin backscatter.” Meas. Sci. Technol. 12 (7): 834–842. https://doi.org/10.1088/0957-0233/12/7/315.
Nield, D. A., and A. Bejan. 2017. Convection in porous media, 982. New York: Springer.
Opaliński, P., K. Radzicki, and S. Bonelli. 2016. “Numerical modelling of coupled heat and water transport on embankment dam in Kozlowa Gora.” Czasopismo Techniczne 2016 (Środowisko 1-Ś (11) 2016): 117–126. https://doi.org/10.4467/2353737XCT.16.200.5949.
Ray, S., D. Mondal, and S. Reuveni. 2019. “Péclet number governs transition to acceleratory restart in drift-diffusion.” J. Phys. A: Math. Theor. 52 (25): 255002. https://doi.org/10.1088/1751-8121/ab1fcc.
Robbins, B. A., and D. V. Griffiths. 2018. “Internal erosion of embankments: A review and appraisal.” In Proc., Rocky Mountain Geo-Conf. 2018, 61–75. Reston, VA: ASCE.
Soga, K., A. Ewais, J. Fern, and J. Park. 2019. “Advances in geotechnical sensors and monitoring.” In Geotechnical fundamentals for addressing new world challenges, Springer series in geomechanics and geoengineering, edited by N. Lu and J. K. Mitchell, 29–65. Cham, Switzerland: Springer.
Soga, K., V. Kwan, L. Pelecanos, Y. Rui, T. Schwamb, H. Seo, and M. Wilcock. 2015. The role of distributed sensing in understanding the engineering performance of geotechnical structures. London: ICE Publishing.
Song, C. R., and T. Y. Yosef. 2017. “Seepage monitoring of an embankment dam based on hydrothermal coupled analysis.” J. Eng. Mater. Technol. 139 (2): 021024. https://doi.org/10.1115/1.4036020.
Torres, R. L. 2009. “Considerations for detection of internal erosion in embankment dams.” In Proc., GEO-Velopment: The Role of Geological and Geotechnical Engineering in New and Redevelopment Projects, 82–98. Reston, VA: ASCE.
Xiao, H., and J. Huang. 2013. “Experimental study of the applications of fiber optic distributed temperature sensors in detecting seepage in soils.” Geotech. Test. J. 36 (3): 360–368. https://doi.org/10.1520/GTJ20120096.
Yosef, T. Y., and C. R. Song. 2015. “Seepage-heat coupled analysis for estimating phreatic line of an earth dam from temperature profile.” In Proc., Symp. on the Application of Geophysics to Engineering and Environmental Problems 2015, 252–256. Denver: Environmental and Engineering Geophysical Society.
Yosef, T. Y., C. R. Song, and K.-T. Chang. 2018. “Hydrothermal coupled analysis for health monitoring of embankment dams.” Acta Geotech. 13 (Aug): 447–455. https://doi.org/10.1007/s11440-017-0571-z.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 150 • Issue 6 • June 2024
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Apr 13, 2023
Accepted: Dec 28, 2023
Published online: Mar 27, 2024
Published in print: Jun 1, 2024
Discussion open until: Aug 27, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.