Cold-Formed Cross-Sectional Folds with Optimal Signature Curve
Publication: Journal of Engineering Mechanics
Volume 150, Issue 8
Abstract
A novel figure of merit based on the concept of signature curve for cold formed steel (CFS) cross sections is used to improve the structural member’s overall behavior regardless of length and boundary conditions. The objective is defined as the area under the signature curve, plus a penalty function that ensures improved performance over standard sections at specified lengths. Charged system search (CSS), a meta-heuristic optimization algorithm, is used to search the design space. End-use and other geometrical constraints suggested by previous studies are considered to arrive at practical cross sections. This includes limiting the fold angles to minimize sharp corners in the optimized cross sections, which might result in residual stresses that diminish axial capacity. Such nonlinear constraints are also taken into account using penalty functions to facilitate integration with the heuristic optimization process. The proposed strategy is examined through a couple of illustrative examples and is shown to yield higher axial capacity at all points when combined with the proper penalization. The optimized cross sections are also analyzed in simple-simple and clamped-clamped boundary conditions showing improved axial capacity compared to the standard lipped-channel sections with the same coil width.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some of the data that support the findings of this study are available from the corresponding author upon reasonable request. This includes the data associated with figures.
Acknowledgments
M. Tootkaboni acknowledges financial support from the Office of Naval Research, United States under Grant Nos. N00014-20-1-2849 (through MUST program at UMassD) and N00014-21-1-2570 and from the National Science Foundation, United States under Grant Nos. CMMI-1401575 and CMMI-1351742. The computational resources were provided by the Center for Scientific Computing and Data Science Research (CSCDR).
References
Ádány, S. 2018. “Signature curve for general thin-walled members.” In Proc., Annual Stability Conf. Chicago: AISC.
AISI (American Iron and Steel Institute). 2007. North American specification for the design of cold-formed steel structural members. Washington, DC: AISI.
Akchurin, D., C. Ding, Y. Xia, H. B. Blum, B. W. Schafer, and Z. Li. 2023. “Instability-driven family optimization of cold-formed steel lipped-channel cross-sections with strength and stiffness constraints.” Thin-Walled Struct. 192 (Nov): 111118. https://doi.org/10.1016/j.tws.2023.111118.
Chamberlain, P. Z., and M. Kripka. 2012. “Cross section optimization using simulated annealing of cold-formed steel channel columns.” In Proc., Annual Stability Conf. Structural Stability Research Council, 39–54. Chicago: AISC.
Cheung, Y., F. Au, and D. Zheng. 2000. “Finite strip method for the free vibration and buckling analysis of plates with abrupt changes in thickness and complex support conditions.” Thin-Walled Struct. 36 (2): 89–110. https://doi.org/10.1016/S0263-8231(99)00044-0.
Cheung, Y. K. 1968. “The finite strip method in the analysis of elastic plates with two opposite simply supported ends.” Proc. Am. Soc. Civ. Eng. 40 (1): 1–7. https://doi.org/10.1680/iicep.1968.7709.
Cheung, Y. K. 2013. Finite strip method in structural analysis. Amsterdam, Netherlands: Elsevier.
Cheung, Y. K., and L. Tham. 1997. Vol. 17 of The finite strip method. Boca Raton, FL: CRC Press.
Foroughi, H., C. Moen, A. Myers, M. Tootkaboni, L. Vieira, and B. Schafer. 2014. “Analysis and design of thin metallic shell structural members-current practice and future research needs.” In Proc., Annual Stability Conf. Structural Stability Research Council. Chicago: AISC.
Gargari, M., A. Louhghalam, and M. Tootkaboni. 2013. “Optimal cross sections for cold formed steel members under compression.” In Proc., 10th World Congress on Structural and Multidisciplinary Optimization Cham, Switzerland: Springer.
Gilbert, B. P., L. H. Teh, and H. Guan. 2012. “Self-shape optimisation principles: Optimisation of section capacity for thin-walled profiles.” Thin-Walled Struct. 60 (Nov): 194–204. https://doi.org/10.1016/j.tws.2012.06.009.
Karim, A., and H. Adeli. 1999. “Global optimum design of cold-formed steel hat-shape beams.” Thin-Walled Struct. 35 (4): 275–288. https://doi.org/10.1016/S0263-8231(99)00033-6.
Kaveh, A., and B. Ahmadi. 2014. “Sizing, geometry and topology optimization of trusses using force method and supervised charged system search.” Struct. Eng. Mech. 50 (3): 365–382. https://doi.org/10.12989/sem.2014.50.3.365.
Kaveh, A., B. Ahmadi, F. Shokohi, and N. Bohlooli. 2013. “Simultaneous analysis, design and optimization of water distribution systems using supervised charged system search.” Int. J. Optim. Civ. Eng. 3 (1): 37–55.
Kaveh, A., and S. Talatahari. 2010a. “A novel heuristic optimization method: Charged system search.” Acta Mech. 213 (3–4): 267–289. https://doi.org/10.1007/s00707-009-0270-4.
Kaveh, A., and S. Talatahari. 2010b. “Optimal design of skeletal structures via the charged system search algorithm.” Struct. Multidiscip. Optim. 41 (6): 893–911. https://doi.org/10.1007/s00158-009-0462-5.
Kaveh, A., and S. Talatahari. 2011. “An enhanced charged system search for configuration optimization using the concept of fields of forces.” Struct. Multidiscip. Optim. 43 (3): 339–351. https://doi.org/10.1007/s00158-010-0571-1.
Kolcu, F., T. Ekmekyapar, and M. Özakça. 2010. “Linear buckling optimization 466 and post-buckling behavior of optimized cold formed steel members.” Sci. Res. Essays 5 (14): 1916–1924.
Kripka, M., and Z. Martin. 2013. “Cold-formed steel channel columns optimization with simulated annealing method.” Struct. Eng. Mech. 48 (3): 383–394. https://doi.org/10.12989/sem.2013.48.3.383.
Lee, J., S.-M. Kim, and H. S. Park. 2006. “Optimum design of cold-formed steel columns by using micro genetic algorithms.” Thin-Walled Struct. 44 (9): 952–960. https://doi.org/10.1016/j.tws.2006.08.021.
Leng, J., J. K. Guest, and B. W. Schafer. 2011. “Shape optimization of cold-formed steel columns.” Thin-Walled Struct. 49 (12): 1492–1503. https://doi.org/10.1016/j.tws.2011.07.009.
Leng, J., Z. Li, J. Guest, and B. Schafer. 2013. “Shape optimization of cold-formed steel columns with manufacturing constraints and limited number of rollers.” In Proc., Structural Stability Research Council, Annual Stability Conf., 16–20. Chicago: AISC.
Leng, J., Z. Li, J. K. Guest, and B. W. Schafer. 2014. “Shape optimization of cold-formed steel columns with fabrication and geometric end-use constraints.” Thin-Walled Struct. 85 (Dec): 271–290. https://doi.org/10.1016/j.tws.2014.08.014.
Li, Z., J. Leng, J. K. Guest, and B. W. Schafer. 2016. “Two-level optimization for a new family of cold-formed steel lipped channel sections against local and distortional buckling.” Thin-Walled Struct. 108 (Nov): 64–74. https://doi.org/10.1016/j.tws.2016.07.004.
Liu, H., T. Igusa, and B. Schafer. 2004. “Knowledge-based global optimization of cold-formed steel columns.” Thin-Walled Struct. 42 (6): 785–801. https://doi.org/10.1016/j.tws.2004.01.001.
Loja, M. R., J. I. Barbosa, C. M. Soares, and C. M. Soares. 2001. “Analysis of piezolaminated plates by the spline finite strip method.” Comput. Struct. 79 (26–28): 2321–2333. https://doi.org/10.1016/S0045-7949(01)00065-7.
Loo, Y.-C., and A. R. Cusens. 1978. The finite strip method in bridge engineering. Budapest, Hungary: Akademiai Kiado.
Madeira, J., J. Dias, and N. Silvestre. 2015. “Multiobjective optimization of cold-formed steel columns.” Thin-Walled Struct. 96 (Nov): 29–38. https://doi.org/10.1016/j.tws.2015.07.025.
Moharrami, M., A. Louhghalam, and M. Tootkaboni. 2014. “Optimal folding of cold formed steel cross sections under compression.” Thin-Walled Struct. 76 (Mar): 145–156. https://doi.org/10.1016/j.tws.2013.11.009.
Mojtabaei, S. M., J. Ye, and I. Hajirasouliha. 2019. “Development of optimum cold-formed steel beams for serviceability and ultimate limit states using big bang-big crunch optimization.” Eng. Struct. 195 (Sep): 172–181. https://doi.org/10.1016/j.engstruct.2019.05.089.
Parastesh, H., I. Hajirasouliha, H. Taji, and A. B. Sabbagh. 2019. “Shape optimization of cold-formed steel beam-columns with practical and manufacturing constraints.” J. Constr. Steel Res. 155 (Apr): 249–259. https://doi.org/10.1016/j.jcsr.2018.12.031.
Precup, R.-E., R.-C. David, E. M. Petriu, S. Preitl, and M.-B. Rădac. 2014. “Novel adaptive charged system search algorithm for optimal tuning of fuzzy controllers.” Expert Syst. Appl. 41 (4): 1168–1175. https://doi.org/10.1016/j.eswa.2013.07.110.
Schafer, B., and S. Ádány. 2006a. “Buckling analysis of cold-formed steel members using CUFSM: Conventional and constrained finite strip methods.” In Proc., 18th Int. Specialty Conf. on Cold-Formed Steel Structures, 39–54. Rolla, MO: Univ. of Missouri.
Schafer, B. W. 2006. “Designing cold-formed steel using the direct strength method.” In Proc., 18-th Int. Specialty Conf. on Cold-Formed Steel Structures, 26–27. Rolla, MO: Univ. of Missouri.
Schafer, B. W. 2008. “Review: The direct strength method of cold-formed steel member design.” J. Constr. Steel Res. 64 (7): 766–778. https://doi.org/10.1016/j.jcsr.2008.01.022.
Schafer, B. W., and S. Ádány. 2006b. “Buckling analysis of cold-formed steel members using CUFSM: Conventional and constrained finite strip methods.” In Proc., 18th Int. Specialty Conf. on Cold-Formed Steel Structures. Orlando, FL: Citeseer.
Schafer, B. W., Z. Li, and C. D. Moen. 2010. “Computational modeling of cold-formed steel.” Thin-Walled Struct. 48 (10–11): 752–762. https://doi.org/10.1016/j.tws.2010.04.008.
Seaburg, P. A., and C. G. Salmon. 1971. “Minimum weight design of light gage steel members.” J. Struct. Div. 97 (1): 203–222. https://doi.org/10.1061/JSDEAG.0002789.
Tian, Y., and T. Lu. 2004. “Minimum weight of cold-formed steel sections under compression.” Thin-Walled Struct. 42 (4): 515–532. https://doi.org/10.1016/j.tws.2003.12.011.
Torabian, S., H. Amouzegar, M. Tootkaboni, and B. W. Schafer. 2016. “Finite element modeling protocols and parametric analyses for short cold-formed steel zee-section beam-columns.” In Proc., Annual Stability Conf. Structural Stability Research Council. Chicago: AISC.
Wang, B., B. P. Gilbert, A. M. Molinier, H. Guan, and L. H. Teh. 2016. “Shape optimisation of cold-formed steel columns with manufacturing constraints using the Hough transform.” Thin-Walled Struct. 106 (Sep): 75–92. https://doi.org/10.1016/j.tws.2016.04.015.
Zhong, W., Y. Cheung, and Y. Li. 1998. “The precise finite strip method.” Comput. Struct. 69 (6): 773–783. https://doi.org/10.1016/S0045-7949(97)00105-3.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Nov 22, 2023
Accepted: Jan 9, 2024
Published online: May 25, 2024
Published in print: Aug 1, 2024
Discussion open until: Oct 25, 2024
ASCE Technical Topics:
- Algorithms
- Axial forces
- Boundary conditions
- Boundary value problem
- Cold-formed steel
- Continuum mechanics
- Cross sections
- Curvature
- Differential equations
- Dynamics (solid mechanics)
- Engineering fundamentals
- Engineering materials (by type)
- Engineering mechanics
- Equations (by type)
- Forces (type)
- Geometry
- Materials engineering
- Mathematics
- Metals (material)
- Solid mechanics
- Steel
- Structural behavior
- Structural engineering
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.