Drained Solution for Elastoplastic Stress of Compressible Matrix around a Growing Poroelastic Inhomogeneity Inclusion
Publication: Journal of Engineering Mechanics
Volume 150, Issue 10
Abstract
An analytical solution is presented for spherically symmetric growth of a fluid-saturated, poroelastic inhomogeneity inclusion embedded within a compressible elastoplastic matrix. A fluid source at the center causes the inclusion growth. The solution considers full poroelastic coupling of the inclusion pore fluid flow and solid phase deformation while solving for large deformation of the matrix via incremental elastoplasticity with associated flow rule and modified Mohr-Coulomb or Drucker-Prager yield models. Results obtained from the compressible (drained) solution are compared against the previously published solution pertaining to incompressible (undrained) matrix. Drained deformation is found to generally cause larger deviatoric stress, less compressive radial and hoop stresses, as well as faster growth of the plastic region, in the matrix. An example case study shows that compared with the undrained case, the drained matrix reaches the same elastoplastic strain with substantially smaller volume of injected fluid inside the embedded inclusion. The solution may be used as a proxy model of caprock integrity problem in geo-sequestration applications and further as a rigorous benchmark to verify the related numerical solvers.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
References
Amar, M. B., and A. Goriely. 2005. “Growth and instability in elastic tissues.” J. Mech. Phys. Solids 53 (10): 2284–2319. https://doi.org/10.1016/j.jmps.2005.04.008.
Bigoni, D., and A. Piccolroaz. 2004. “Yield criteria for quasibrittle and frictional materials.” Int. J. Solids Struct. 41 (11): 2855–2878. https://doi.org/10.1016/j.ijsolstr.2003.12.024.
Biot, M. A. 1941. “General theory of three-dimensional consolidation.” J. Appl. Phys. 12 (2): 155–164. https://doi.org/10.1063/1.1712886.
Chen, S. L. 2024. “A graphical solution framework for elastoplastic cylindrical cavity problem in Mohr–Coulomb material.” J. Eng. Mech. 150 (5): 04024016. https://doi.org/10.1061/JENMDT.EMENG-7433.
Chen, S. L., and Y. N. Abousleiman. 2013. “Exact drained solution for cylindrical cavity expansion in modified Cam Clay soil.” Géotechnique 63 (6): 510–517. https://doi.org/10.1680/geot.11.P.088.
Chen, S. L., and Y. N. Abousleiman. 2017. “Wellbore stability analysis using strain hardening and/or softening plasticity models.” Int. J. Rock Mech. Min. Sci. 93 (Mar): 260–268. https://doi.org/10.1016/j.ijrmms.2017.02.007.
Chen, S. L., and Y. N. Abousleiman. 2018. “Cavity expansion in strain hardening frictional soils under drained condition.” Int. J. Numer. Anal. Methods Geomech. 42 (1): 132–142. https://doi.org/10.1002/nag.2718.
Chen, S. L., and Y. N. Abousleiman. 2023. “A graphical analysis-based method for undrained cylindrical cavity expansion in modified Cam Clay soil.” Géotechnique 73 (8): 736–746. https://doi.org/10.1680/jgeot.21.00172.
Cheng, A. H., P. Sidauruk, and Y. Abousleiman. 1994. “Approximate inversion of the Laplace transform.” Math. J. 4 (2): 76–82.
Christensen, R. M. 2005. Mechanics of composite materials. New York: Dover Publications.
Davis, R. O., and A. P. Selvadurai. 2005. Plasticity and geomechanics. Cambridge, UK: Cambridge University Press.
Diani, J. L., and D. M. Parks. 2000. “Problem of an inclusion in an infinite body, approach in large deformation.” Mech. Mater. 32 (1): 43–55. https://doi.org/10.1016/S0167-6636(99)00015-0.
Eshelby, J. D. 1957. “The determination of the elastic field of an ellipsoidal inclusion, and related problems.” Proc. R. Soc. London, Ser. A 241 (1226): 376–396. https://doi.org/10.1098/rspa.1957.0133.
Espinoza, D. N., and J. C. Santamarina. 2017. “CO2 breakthrough—Caprock sealing efficiency and integrity for carbon geological storage.” Int. J. Greenhouse Gas Control 66 (Nov): 218–229. https://doi.org/10.1016/j.ijggc.2017.09.019.
Gholami, R., A. Raza, and S. Iglauer. 2021. “Leakage risk assessment of a storage site: A review.” Earth Sci. Rev. 223 (Dec): 103849. https://doi.org/10.1016/j.earscirev.2021.103849.
Golgoon, A., and A. Yavari. 2018. “Nonlinear elastic inclusions in anisotropic solids.” J. Elast. 130 (2): 239–269. https://doi.org/10.1007/s10659-017-9639-0.
Hashin, Z. 1969. “The inelastic inclusion problem.” Int. J. Eng. Sci. 7 (1): 11–36. https://doi.org/10.1016/0020-7225(69)90020-2.
Khoei, A. R., A. R. Azami, and S. M. Haeri. 2004. “Implementation of plasticity based models in dynamic analysis of earth and rockfill dams: A comparison of pastor–Zienkiewicz and cap models.” Comput. Geotech. 31 (5): 384–409. https://doi.org/10.1016/j.compgeo.2004.04.003.
Lippmann, H. 1971. “Plasticity in rock mechanics.” Int. J. Mech. Sci. 13 (4): 291–297. https://doi.org/10.1016/0020-7403(71)90054-3.
Lü, P., Q. Li, and Y. Song. 2004. “Damage constitutive of concrete under uniaxial alternate tension–compression fatigue loading based on double bounding surfaces.” Int. J. Solids Struct. 41 (11): 3151–3166. https://doi.org/10.1016/j.ijsolstr.2004.01.026.
Matsuoka, T., and K. Nakai. 1974. “Stress-deformation and stress strain theory for cohesionless soil under three different principal stresses.” Proc. Jpn. Soc. Civ. Eng. 1974 (232): 59–70. https://doi.org/10.2208/jscej1969.1974.232_59.
Molinari, A., G. R. Canova, and S. Ahzi. 1987. “A self consistent approach of the large deformation polycrystal viscoplasticity.” Acta Metall. 35 (12): 2983–2994. https://doi.org/10.1016/0001-6160(87)90297-5.
Molinari, A., F. El Houdaigui, and L. S. Toth. 2004. “Validation of the tangent formulation for the solution of the non-linear Eshelby inclusion problem.” Int. J. Plast. 20 (2): 291–307. https://doi.org/10.1016/S0749-6419(03)00038-X.
Mori, T., and K. Tanaka. 1973. “Average stress in matrix and average elastic energy of materials with misfitting inclusions.” Acta Metall. 21 (5): 571–574. https://doi.org/10.1016/0001-6160(73)90064-3.
Mortara, G. 2009. “A hierarchical single yield surface for frictional materials.” Comput. Geotech. 36 (6): 960–967. https://doi.org/10.1016/j.compgeo.2009.03.007.
Muir Wood, D. 2004. Geotechnical modelling. 1st ed. New York: CRC Press.
Mura, T. 1987. Micromechanics of defects in solids. 2nd ed. Dordrecht, Netherlands: Kluwer Academic Publishers.
Rice, J. R., and M. P. Cleary. 1976. “Some basic stress diffusion solutions for fluid-saturated elastic porous media with compressible constituents.” Rev. Geophys. Space Phys. 14 (2): 227–241. https://doi.org/10.1029/RG014i002p00227.
Rowshandel, B., and S. Nemat-Nasser. 1987. “Finite strain rock plasticity: Stress triaxiality, pressure, and temperature effects.” Soil Dyn. Earthquake Eng. 6 (4): 203–219. https://doi.org/10.1016/0267-7261(87)90002-9.
Sevostianov, I., and A. Vakulenko. 2001. “Inclusion with nonlinear properties in elastic medium.” Int. J. Fract. 107 (1): 9–14. https://doi.org/10.1023/A:1007603212186.
Soltanzadeh, H., C. D. Hawkes, and J. S. Sharma. 2007. “Poroelastic model for production-and injection-induced stresses in reservoirs with elastic properties different from the surrounding rock.” Int. J. Geomech. 7 (5): 353–361. https://doi.org/10.1061/(ASCE)1532-3641(2007)7:5(353).
Stehfest, H. 1970. “Numerical inversion of Laplace transforms.” Commun. ACM 13 (1): 47–49. https://doi.org/10.1145/361953.361969.
Vidal-Gilbert, S., E. Tenthorey, D. Dewhurst, J. Ennis-King, P. Van Ruth, and R. Hillis. 2010. “Geomechanical analysis of the Naylor Field, Otway Basin, Australia: Implications for CO2 injection and storage.” Int. J. Greenhouse Gas Control 4 (5): 827–839. https://doi.org/10.1016/j.ijggc.2010.06.001.
Vilarrasa, V., S. Olivella, J. Carrera, and J. Rutqvist. 2014. “Long term impacts of cold injection on the caprock integrity.” Int. J. Greenhouse Gas Control 24 (May): 1–13. https://doi.org/10.1016/j.ijggc.2014.02.016.
Weng, G. J. 1990. “The overall elastoplastic stress-strain relations of dual-phase metals.” J. Mech. Phys. Solids 38 (3): 419–441. https://doi.org/10.1016/0022-5096(90)90007-Q.
Wu, Y., A. Mehrabian, S. Chen, and Y. Abousleiman. 2024. “Time-dependent elastoplastic stress of an infinite matrix around a growing poroelastic inhomogeneity inclusion.” J. Eng. Mech. 150 (3): 04024002. https://doi.org/10.1061/JENMDT.EMENG-7354.
Yavari, A. 2021. “On Eshelby’s inclusion problem in nonlinear anisotropic elasticity.” J. Micromech. Mol. Phys. 6 (1): 2150002. https://doi.org/10.1142/S2424913021500028.
Yavari, A., and A. Goriely. 2013. “Nonlinear elastic inclusions in isotropic solids.” Proc. R. Soc. A 469 (2160): 20130415. https://doi.org/10.1098/rspa.2013.0415.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Nov 2, 2023
Accepted: May 13, 2024
Published online: Jul 24, 2024
Published in print: Oct 1, 2024
Discussion open until: Dec 24, 2024
ASCE Technical Topics:
- Compression
- Continuum mechanics
- Deformation (mechanics)
- Diversity, equity, inclusion, and accessibility (DEIA)
- Drainage
- Dynamics (solid mechanics)
- Elasticity and Inelasticity
- Elastoplasticity
- Engineering fundamentals
- Engineering mechanics
- Flow (fluid dynamics)
- Fluid dynamics
- Fluid flow
- Fluid mechanics
- Hydraulic engineering
- Hydrologic engineering
- Hysteresis
- Irrigation engineering
- Material mechanics
- Material properties
- Materials characterization
- Materials engineering
- Mathematical functions
- Mathematics
- Matrix (mathematics)
- Mechanical properties
- Poroelasticity
- Rheology
- Solid mechanics
- Structural dynamics
- Structural engineering
- Structural mechanics
- Thermoelasticity
- Water and water resources
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.