Generalized Discrete Estimating Method for Moving Force Identification on a Simply Supported Beam Bridge
Publication: Journal of Engineering Mechanics
Volume 149, Issue 12
Abstract
Moving forces are one of the major loads acting on bridge decks, and moving force identification (MFI) is essential for bridge safety. However, there are two shortcomings in existing MFI methods. First, time discrete sampling for the force leads to ill-posedness in MFI. Second, identifying moving forces by means of a fixed frequency and a single type of force dictionary cannot fully and sparsely represent these forces. To address these issues, basis functions containing a trigonometric function and variable-frequency rectangular function are used to sparsely express the force, and the Duhamel integral is used to avoid ill-posed reduction of time discrete sampling for the force. A generalized discrete estimating method (GDEM) is proposed to identify moving forces. The regularization method in a sparse solution is introduced to transform the force identification problem into an regularization solution problem. The fast-iterative shrinkage threshold algorithm (FISTA) is used to solve the regularization problem, and the coefficient of the basis functions is obtained by combining the Bayesian criteria to identify the force. To validate the GDEM, the single and double time-varying forces on a simply supported beam are identified by numerical simulation. The results illustrate that the GDEM can accurately identify moving forces with strong robustness and performs better than the dictionary method. The response combinations of MFI are also discussed.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code generated or used during the study are available from the corresponding author by request.
Acknowledgments
This research work was jointly supported by the National Natural Science Foundation of China (Grant Nos. 52250011 and 52078102) and the Fundamental Research Funds for the Central Universities (Grant Nos. DUT22ZD213 and DUT22QN235).
References
Bajwa, R., E. Coleri, R. Rajagopal, P. Varaiya, and C. Flores. 2017. “Development of a cost-effective wireless vibration weigh-in-motion system to estimate axle weights of trucks.” Comput.-Aided Civ. Infrastruct. Eng. 32 (6): 443–457. https://doi.org/10.1111/mice.12269.
Bao, T., S. K. Babanajad, T. Taylor, and F. Ansari. 2016. “Generalized method and monitoring technique for shear-strain-based bridge weigh-in-motion.” J. Bridge Eng. 21 (1): 04015029. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000782.
Beck, A., and M. Teboulle. 2009. “A fast iterative shrinkage-thresholding algorithm for linear inverse problem.” SIAM J. Imaging Sci. 2 (1): 183–202. https://doi.org/10.1137/080716542.
Chen, S.-Z., G. Wu, D.-C. Feng, and L. Zhang. 2018. “Development of a bridge weigh-in-motion system based on long-gauge fiber Bragg grating sensors.” J. Bridge Eng. 23 (9): 04018063. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001283.
Chen, Z., T. H. T. Chan, A. Nguyen, and L. Yu. 2019. “Identification of vehicle axle loads from bridge responses using preconditioned least square QR-factorization algorithm.” Mech. Syst. Signal Process. 128 (Aug): 479–496. https://doi.org/10.1016/j.ymssp.2019.03.043.
Deng, L., and C. S. Cai. 2010. “Identification of dynamic vehicular axle loads: Theory and simulations.” J. Vib. Control 16 (14): 2167–2194. https://doi.org/10.1177/1077546309351221.
Feng, D., H. Sun, and M. Q. Feng. 2015. “Simultaneous identification of bridge structural parameters and vehicle loads.” Comput. Struct. 157 (Sep): 76–88. https://doi.org/10.1016/j.compstruc.2015.05.017.
Hansen, P. C., T. K. Jensen, and G. Rodriguez. 2007. “An adaptive pruning algorithm for the discrete L-curve criterion.” J. Comput. Appl. Math. 198 (2): 483–492. https://doi.org/10.1016/j.cam.2005.09.026.
He, W., T. Ling, E. J. O’Brien, and L. Deng. 2019. “Virtual axle method for bridge weigh-in-motion systems requiring no axle detector.” J. Bridge Eng. 24 (9): 04019086. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001474.
He, W.-Y., Y. Wang, and W.-X. Ren. 2020. “Dynamic force identification based on composite trigonometric wavelet shape function.” Mech. Syst. Signal Process. 141 (Jul): 106493. https://doi.org/10.1016/j.ymssp.2019.106493.
He, W.-Y., Y. Wang, and S. Zhu. 2018. “Adaptive reconstruction of a dynamic force using multiscale wavelet shape functions.” Shock Vib. 2018 (Jan): 1–11. https://doi.org/10.1155/2018/8213105.
Kim, D., and J. A. Fessler. 2018. “Another look at the fast-iterative shrinkage/thresholding algorithm (FISTA).” SIAM J. Optim. 28 (1): 223–250. https://doi.org/10.1137/16M108940X.
Law, S. S., T. H. T. Chan, X. Q. Zhu, and Q. H. Zeng. 2001. “Regularization in moving force identification.” J. Eng. Mech. 127 (2): 136–148. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:2(136).
Law, S.-S., T. H. T. Chan, and Q. H. Zeng. 1997. “Moving force identification: A time domain method.” J. Sound Vib. 201 (1): 1–22. https://doi.org/10.1006/jsvi.1996.0774.
Li, S., G. Peng, M. Ji, F. Cheng, Z. Chen, and Z. Li. 2022. “Impact identification of composite cylinder based on improved deep metric learning model and weighted fusion Tikhonov regularized total least squares.” Compos. Struct. 283 (Mar): 115144. https://doi.org/10.1016/j.compstruct.2021.115144.
Liu, H., Z. Luo, and L. Yu. 2021. “A semi-convex function for both constant and time-varying moving force identification.” Mech. Syst. Signal Process. 146 (Jan): 107062. https://doi.org/10.1016/j.ymssp.2020.107062.
MacLeod, E., and K. Arjomandi. 2022. “Enhanced bridge weigh-in-motion system using hybrid strain-acceleration sensor data.” J. Bridge Eng. 27 (9): 04022077. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001924.
Moses, F. 1979. “Weigh-in-motin system using instrumented bridges.” Transp. Eng. J. ASCE 105 (3): 233–249. https://doi.org/10.1061/TPEJAN.0000783.
Pan, C., X. Deng, and Z. Huang. 2020. “Parallel computing-oriented method for long-time duration problem of force identification.” Eng. Comput. 38 (Jun): 919–937. https://doi.org/10.1007/s00366-020-01097-6.
Pan, C.-D., L. Yu, H.-L. Liu, Z.-P. Chen, and W.-F. Luo. 2018. “Moving force identification based on redundant concatenated dictionary and weighted l1-norm regularization.” Mech. Syst. Signal Process. 98 (Jan): 32–49. https://doi.org/10.1016/j.ymssp.2017.04.032.
Qiao, B., X. Chen, X. Luo, and X. Xue. 2015a. “A novel method for force identification based on the discrete cosine transform.” J. Vib. Acoust. 137 (5): 051012. https://doi.org/10.1115/1.4030616.
Qiao, B., X. Chen, X. Xue, X. Luo, and R. Liu. 2015b. “The application of cubic B-spline collocation method in impact force identification.” Mech. Syst. Signal Process. 64–65 (Dec): 413–427. https://doi.org/10.1016/j.ymssp.2015.04.009.
Qiao, B., X. Zhang, C. Wang, H. Zhang, and X. Chen. 2016. “Sparse regularization for force identification using dictionaries.” J. Sound Vib. 368 (Apr): 71–86. https://doi.org/10.1016/j.jsv.2016.01.030.
Sanchez, J., and H. Benaroya. 2014. “Review of force reconstruction techniques.” J. Sound Vib. 333 (14): 2999–3018. https://doi.org/10.1016/j.jsv.2014.02.025.
Sun, Y., L. Luo, K. Chen, X. Qin, and Q. Zhang. 2020. “A time-domain method for load identification using moving weighted least square technique.” Comput. Struct. 234 (Jul): 106254. https://doi.org/10.1016/j.compstruc.2020.106254.
Vogel, C. R. 1996. “Non-convergence of the L-curve regularization parameter selection method.” Inverse Probl. 12 (4): 535–547. https://doi.org/10.1088/0266-5611/12/4/013.
Wei, Y., Z. Lu, G. Yuan, Z. Fang, and Y. Huang. 2017. “Sparsity adaptive matching pursuit detection algorithm based on compressed sensing for radar signals.” Sensors 17 (5): 1120. https://doi.org/10.3390/s17051120.
Wright, S. J., R. D. Nowak, and M. A. T. Figueiredo. 2009. “Sparse reconstruction by separable approximation.” IEEE Trans. Signal Process. 57 (7): 2479–2493. https://doi.org/10.1109/TSP.2009.2016892.
Xiao, X., D. Pi, and Q. Zhu. 2022. “A bridge weigh-in-motion algorithm for fast-passing railway freight vehicles considering bridge-vehicle interaction.” Mech. Syst. Signal Process. 181 (Dec): 109493. https://doi.org/10.1016/j.ymssp.2022.109493.
Xiao, X., Y. Yan, and B. Chen. 2019. “Stochastic dynamic analysis for vehicle-track-bridge system based on probability density evolution method.” Eng. Struct. 188 (Jun): 745–761. https://doi.org/10.1016/j.engstruct.2019.02.042.
Yang, X.-M., T.-H. Yi, C.-X. Qu, H.-N. Li, and H. Liu. 2022. “Performance warning of bridges under train actions through equivalent frequency response functions.” J. Bridge Eng. 27 (10): 04022091. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001925.
Zhang, X., Z. Liu, Q. Miao, and L. Wang. 2018. “Bearing fault diagnosis using a whale optimization algorithm-optimized orthogonal matching pursuit with a combined time–frequency atom dictionary.” Mech. Syst. Signal Process. 107 (Jul): 29–42. https://doi.org/10.1016/j.ymssp.2018.01.027.
Zhang, Z.-H., W.-Y. He, and W.-X. Ren. 2022. “Moving force identification based on learning dictionary with double sparsity.” Mech. Syst. Signal Process. 170 (May): 108811. https://doi.org/10.1016/j.ymssp.2022.108811.
Zhao, H., N. Uddin, E. J. O’Brien, X. Shao, and P. Zhu. 2014. “Identification of vehicular axle weights with a bridge weigh-in-motion system considering transverse distribution of wheel loads.” J. Bridge Eng. 19 (3): 04013008. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000533.
Zhou, H.-C., H.-N. Li, D.-H. Yang, and T.-H. Yi. 2022a. “Moving force identification of simply supported bridges through the integral time domain method.” J. Sound Vib. 534 (Sep): 117046. https://doi.org/10.1016/j.jsv.2022.117046.
Zhou, X., W. He, Y. Zeng, and Y. Zhang. 2022b. “A semi-analytical method for moving force identification of bridge structures based on the discrete cosine transform and FEM.” Mech. Syst. Signal Process. 180 (Nov): 109444. https://doi.org/10.1016/j.ymssp.2022.109444.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Nov 30, 2022
Accepted: Aug 14, 2023
Published online: Oct 9, 2023
Published in print: Dec 1, 2023
Discussion open until: Mar 9, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.