Unified Modeling of Interface between Structured Clay or Crushable Sand and Structure
Publication: Journal of Engineering Mechanics
Volume 149, Issue 8
Abstract
The purpose of this paper is to develop a unified elastoplastic model for describing both monotonic and cyclic behaviors of natural structured clay–structure and crushable sand–structure interfaces based on the bounding surface plasticity and the critical state concept with three features: (1) a more general yield surface with two shape parameters is adopted to improve the prediction of the shear yield and the critical state of the soil–structure interface, (2) the degradation of bounding surface size and the adhesive normal stress is introduced into the model to consider the shear strength reduction of natural structured clay–structure interface, and (3) the grain breakage effect on the behavior of crushable sand–structure interface is considered by incorporating the location of the critical-state line with the broadening of grain-size distribution induced by grain breakage. Then, explicit simulation schemes with substepping and error control are established for simulating interface shear tests under constant volume, constant normal load, and constant normal stiffness conditions. Finally, comparisons between experimental and numerical results indicate that the unified soil–structure interface model is able to not only predict the state-dependent monotonic stress–strain behavior of structured clay–structure or crushable sand–structure interfaces, but also reproduce the cyclic accumulative contraction and stabilization, as well as the stress degradation observed in both structured clay–structure and crushable sand–structure interfaces.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The data that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The financial supports provided by a GRF project (Grant Nos. 15217220 and N_PolyU534/20) from the Research Grants Council (RGC) of Hong Kong are gratefully acknowledged.
References
Arnold, M., and I. Herle. 2006. “Hypoplastic description of the frictional behaviour of contacts.” In Numerical methods in geotechnical engineering, 101–106. London: Taylor & Francis Group.
ASTM. 1990. Standard test method for direct shear test of soils under consolidated drained conditions. ASTM D3080-90. West Conshohocken, PA: ASTM.
Biarez, J., and P.-Y. Hicher. 1994. Elementary mechanics of soil behaviour: Saturated remoulded soils. Rotterdam, Netherlands: A. A. Balkema.
Boulon, M., V. Ghionna, and G. Mortara. 2003. “A strain-hardening elastoplastic model for sand-structure interface under monotonic and cyclic loading.” Math. Comput. Modell. 37 (5–6): 623–630. https://doi.org/10.1016/S0895-7177(03)00056-6.
Boulon, M., and R. Nova. 1990. “Modelling of soil-structure interface behaviour a comparison between elastoplastic and rate type laws.” Comput. Geotech. 9 (1–2): 21–46. https://doi.org/10.1016/0266-352X(90)90027-S.
Boulon, M., C. Plytas, and P. Foray. 1986. “Comportement d’interface et prévision du frottement latéral le long des pieux et tirants d’ancrage.” Rev. Fr. Géotech. (35): 31–48. https://doi.org/10.1051/geotech/1986035031.
Coop, M. R., K. K. Sorensen, T. B. Freitas, and G. Georgoutsos. 2004. “Particle breakage during shearing of a carbonate sand.” Géotechnique 54 (3): 157–163. https://doi.org/10.1680/geot.2004.54.3.157.
Dafalias, Y. F. 1986. “Bounding surface plasticity. I: Mathematical foundation and hypoplasticity.” J. Eng. Mech. 112 (9): 966–987. https://doi.org/10.1061/(ASCE)0733-9399(1986)112:9(966).
Dafalias, Y. F., and L. R. Herrmann. 1982. “Bounding surface formulation of soil plasticity.” In Soil mechanics—Transient and cyclic load. London: Wiley.
Daouadji, A., and P. Y. Hicher. 2010. “An enhanced constitutive model for crushable granular materials.” Int. J. Numer. Anal. Methods Geomech. 34 (6): 555–580. https://doi.org/10.1002/nag.815.
Daouadji, A., P.-Y. Hicher, and A. Rahma. 2001. “An elastoplastic model for granular materials taking into account grain breakage.” Eur. J. Mech. A. Solids 20 (1): 113–137. https://doi.org/10.1016/S0997-7538(00)01130-X.
De Gennaro, V., and R. Frank. 2002. “Elasto-plastic analysis of the interface behaviour between granular media and structure.” Comput. Geotech. 29 (7): 547–572. https://doi.org/10.1016/S0266-352X(02)00010-1.
DeJong, J. T., M. F. Randolph, and D. J. White. 2003. “Interface load transfer degradation during cyclic loading: A microscale investigation.” Soils Found. 43 (4): 81–93. https://doi.org/10.3208/sandf.43.4_81.
Desai, C. S., and Y. Ma. 1992. “Modelling of joints and interfaces using the disturbed-state concept.” Int. J. Numer. Anal. Methods Geomech. 16 (9): 623–653. https://doi.org/10.1002/nag.1610160903.
Donna, A. D., A. Ferrari, and L. Laloui. 2016. “Experimental investigations of the soil–concrete interface: Physical mechanisms, cyclic mobilization, and behaviour at different temperatures.” Can. Geotech. J. 53 (4): 659–672. https://doi.org/10.1139/cgj-2015-0294.
Einav, I. 2007. “Breakage mechanics—Part I: Theory.” J. Mech. Phys. Solids 55 (6): 1274–1297. https://doi.org/10.1016/j.jmps.2006.11.003.
Evgin, E., and K. Fakharian. 1997. “Effect of stress paths on the behaviour of sand steel interfaces.” Can. Geotech. J. 33 (6): 853–865. https://doi.org/10.1139/t96-116-336.
Fakharian, K. 1996. Three-dimensional monotonic and cyclic behaviour of sand-steel interfaces: Testing and modeling. Ottawa: Univ. of Ottawa.
Fakharian, K., and E. Evgin. 1997. “Cyclic simple-shear behavior of sand-steel interfaces under constant normal stiffness condition.” J. Geotech. Geoenviron. Eng. 123 (12): 1096–1105. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:12(1096).
Ghionna, V. N., and G. Mortara. 2002. “An elastoplastic model for sand–structure interface behavior.” Géotechnique 52 (1): 41–50. https://doi.org/10.1680/geot.2002.52.1.41.
Guyon, É., and J.-P. Troadec. 1994. Du sac de billes au tas de sable. Paris: Odile Jacob.
Hardin, B. O. 1985. “Crushing of soil particles.” J. Geotech. Eng. 111 (10): 1177–1192. https://doi.org/10.1061/(ASCE)0733-9410(1985)111:10(1177).
Hashiguchi, K. 1989. “Subloading surface model in unconventional plasticity.” Int. J. Solids Struct. 25 (8): 917–945. https://doi.org/10.1016/0020-7683(89)90038-3.
Ho, T.-Y.-K., R.-J. Jardine, and N. Anh-Minh. 2011. “Large-displacement interface shear between steel and granular media.” Géotechnique 61 (3): 221–234. https://doi.org/10.1680/geot.8.P.086.
Hu, L., and J. Pu. 2004. “Testing and modeling of soil-structure interface.” J. Geotech. Geoenviron. Eng. 130 (8): 851–860. https://doi.org/10.1061/(ASCE)1090-0241(2004)130:8(851).
Hu, L., and J. L. Pu. 2003. “Application of damage model for soil–structure interface.” Comput. Geotech. 30 (2): 165–183. https://doi.org/10.1016/S0266-352X(02)00059-9.
Indraratna, B., J. Lackenby, and D. Christie. 2005. “Effect of confining pressure on the degradation of ballast under cyclic loading.” Géotechnique 55 (4): 325–328. https://doi.org/10.1680/geot.2005.55.4.325.
Jin, Y.-F., Z.-Y. Yin, S.-L. Shen, and P.-Y. Hicher. 2016. “Selection of sand models and identification of parameters using an enhanced genetic algorithm.” Int. J. Numer. Anal. Methods Geomech. 40 (8): 1219–1240. https://doi.org/10.1002/nag.2487.
Jin, Y.-F., Z.-Y. Yin, Z.-X. Wu, and A. Daouadji. 2018. “Numerical modeling of pile penetration in silica sands considering the effect of grain breakage.” Finite Elem. Anal. Des. 144 (1): 15–29. https://doi.org/10.1016/j.finel.2018.02.003.
Jin, Y.-F., Z.-Y. Yin, W.-H. Zhou, and S. Horpibulsuk. 2019a. “Identifying parameters of advanced soil models using an enhanced transitional Markov chain Monte Carlo method.” Acta Geotech. 14 (6): 1925–1947. https://doi.org/10.1007/s11440-019-00847-1.
Jin, Y.-F., Z.-Y. Yin, W.-H. Zhou, and H.-W. Huang. 2019b. “Multi-objective optimization-based updating of predictions during excavation.” Eng. Appl. Artif. Intell. 78 (Feb): 102–123. https://doi.org/10.1016/j.engappai.2018.11.002.
Jin, Y.-F., Z.-Y. Yin, W.-H. Zhou, and J.-F. Shao. 2019c. “Bayesian model selection for sand with generalization ability evaluation.” Int. J. Numer. Anal. Methods Geomech. 43 (14): 2305–2327. https://doi.org/10.1002/nag.2979.
Kishida, H., and M. Uesugi. 1987. “Tests of the interface between sand and steel in the simple shear apparatus.” Géotechnique 37 (1): 45–52. https://doi.org/10.1680/geot.1987.37.1.45.
Lashkari, A. 2012. “A critical state model for saturated and unsaturated interfaces.” Sci. Iran. 19 (5): 1147–1156. https://doi.org/10.1016/j.scient.2012.06.025.
Liu, H., E. Song, and H. I. Ling. 2006. “Constitutive modeling of soil-structure interface through the concept of critical state soil mechanics.” Mech. Res. Commun. 33 (4): 515–531. https://doi.org/10.1016/j.mechrescom.2006.01.002.
Liu, J., D. Zou, and X. Kong. 2014. “A three-dimensional state-dependent model of soil–structure interface for monotonic and cyclic loadings.” Comput. Geotech. 61 (Sep): 166–177. https://doi.org/10.1016/j.compgeo.2014.05.012.
Martinez, A., and H. H. Stutz. 2019. “Rate effects on the interface shear behaviour of normally and over-consolidated clay.” Géotechnique 69 (9): 801–815. https://doi.org/10.1680/jgeot.17.P.311.
Pra-ai, S. 2013. “Behaviour of soil-structure interfaces subjected to a large number of cycles.” In Application to piles. Grenoble, France: Universite de Grenoble.
Richart, F. E., J. R. Hall, and R. D. Woods. 1970. Vibrations of soils and foundations. Englewood Cliffs, NJ: Prentice-Hall.
Roscoe, K. H., and J. Burland. 1968. On the generalized stress-strain behaviour of wet clay, edited by J. Heyman and F. Leckie, 535–609. Cambridge, UK: Cambridge University Press.
Shahrour, I., and F. Rezaie. 1997. “An elastoplastic constitutive relation for the soil-structure interface under cyclic loading.” Comput. Geotech. 21 (1): 21–39. https://doi.org/10.1016/S0266-352X(97)00001-3.
Sloan, S. W., A. J. Abbo, and D. Sheng. 2001. “Refined explicit integration of elastoplastic models with automatic error control.” Eng. Comput. 18 (1): 121–194. https://doi.org/10.1108/02644400110365842.
Stutz, H., and D. Mašín. 2017. “Hypoplastic interface models for fine-grained soils.” Int. J. Numer. Anal. Methods Geomech. 41 (2): 284–303. https://doi.org/10.1002/nag.2561.
Stutz, H., D. Mašín, and F. Wuttke. 2016. “Enhancement of a hypoplastic model for granular soil–structure interface behavior.” Acta Geotech. 11 (6): 1249–1261. https://doi.org/10.1007/s11440-016-0440-1.
Su, L.-J., W.-H. Zhou, W.-B. Chen, and X. Jie. 2018. “Effects of relative roughness and mean particle size on the shear strength of sand-steel interface.” Measurement 122 (Jul): 339–346. https://doi.org/10.1016/j.measurement.2018.03.003.
Taha, A., and M. Fall. 2014. “Shear behavior of sensitive marine clay–steel interfaces.” Acta Geotech. 9 (6): 969–980. https://doi.org/10.1007/s11440-014-0321-4.
Yang, J., and Z.-Y. Yin. 2021. “Soil-structure interface modeling with the nonlinear incremental approach.” Int. J. Numer. Anal. Methods Geomech. 45 (10): 1381–1404. https://doi.org/10.1002/nag.3206.
Yang, Z.-X., R.-J. Jardine, B.-T. Zhu, P. Foray, and C.-H.-C. Tsuha. 2010. “Sand grain crushing and interface shearing during displacement pile installation in sand.” Géotechnique 60 (6): 469–482. https://doi.org/10.1680/geot.2010.60.6.469.
Yao, Y. P., D. A. Sun, and T. Luo. 2004. “A critical state model for sands dependent on stress and density.” Int. J. Numer. Anal. Methods Geomech. 28 (4): 323–337.
Yao, Y.-P., L. Liu, T. Luo, Y. Tian, and J.-M. Zhang. 2019. “Unified hardening (UH) model for clays and sands.” Comput. Geotech. 110 (Jun): 326–343. https://doi.org/10.1016/j.compgeo.2019.02.024.
Yin, Z.-Y., P.-Y. Hicher, C. Dano, and Y.-F. Jin. 2017. “Modeling mechanical behavior of very coarse granular materials.” J. Eng. Mech. 143 (1): C4016006. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001059.
Yin, Z.-Y., Y.-F. Jin, J. S. Shen, and P.-Y. Hicher. 2018. “Optimization techniques for identifying soil parameters in geotechnical engineering: Comparative study and enhancement.” Int. J. Numer. Anal. Methods Geomech. 42 (1): 70–94. https://doi.org/10.1002/nag.2714.
Yin, Z.-Y., Y.-F. Jin, S.-L. Shen, and H.-W. Huang. 2016. “An efficient optimization method for identifying parameters of soft structured clay by an enhanced genetic algorithm and elastic–viscoplastic model.” Acta Geotech. 12 (4): 849–867. https://doi.org/10.1007/s11440-016-0486-0.
Yu, H. S. 1998. “CASM: A unified state parameter model for clay and sand.” Int. J. Numer. Anal. Methods Geomech. 22 (8): 621–653. https://doi.org/10.1002/(SICI)1096-9853(199808)22:8%3C621::AID-NAG937%3E3.0.CO;2-8.
Zeghal, M., and T. B. Edil. 2002. “Soil structure interaction analysis: Modeling the interface.” Can. Geotech. J. 39 (3): 620–628. https://doi.org/10.1139/t02-016.
Zhang, C., G. D. Nguyen, and I. Einav. 2013. “The end-bearing capacity of piles penetrating into crushable soils.” Géotechnique 63 (5): 341–354. https://doi.org/10.1680/geot.11.P.117.
Zhang, G., and J.-M. Zhang. 2009. “Numerical modeling of soil–structure interface of a concrete-faced rockfill dam.” Comput. Geotech. 36 (5): 762–772. https://doi.org/10.1016/j.compgeo.2009.01.002.
Zhou, W.-H., J.-H. Yin, and C.-Y. Hong. 2011. “Finite element modelling of pullout testing on a soil nail in a pullout box under different overburden and grouting pressures.” Can. Geotech. J. 48 (4): 557–567. https://doi.org/10.1139/t10-086.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Oct 2, 2022
Accepted: Mar 28, 2023
Published online: Jun 7, 2023
Published in print: Aug 1, 2023
Discussion open until: Nov 7, 2023
ASCE Technical Topics:
- Bounding surface
- Clays
- Continuum mechanics
- Deformation (mechanics)
- Engineering fundamentals
- Engineering mechanics
- Geomechanics
- Geotechnical engineering
- Models (by type)
- Plasticity
- Soil mechanics
- Soil properties
- Soil strength
- Soil stress
- Soil structures
- Soils (by type)
- Solid mechanics
- Structural behavior
- Structural engineering
- Structural mechanics
- Structural models
- Structures (by type)
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.