Finite-Element Modeling and Experimental Verification of Two-Way Sandwich Panels Made of Natural Fiber Composites
Publication: Journal of Composites for Construction
Volume 27, Issue 1
Abstract
Finite-element (FE) modeling of sandwich panels with bidirectional flax fiber–reinforced polymer (FFRP) faces and polyisocyanurate foam cores in two-way bending under concentrated loads was performed. In addition, three large-scale (1,200 × 1,200 mm) sandwich panels with FFRP faces of various thicknesses (one, two, or three layers of flax fabric) and 75-mm-thick foam cores were tested under a concentrated load. The modeling was completed using commercially available software. The material nonlinearity of both the FFRPs and the foam cores was considered as well as the geometric nonlinearity due to localized deformation. Four failure modes were considered: FFRP compression crushing, FFRP tensile rupture, core shear, and compression-face wrinkling. Using the verified model, a parametric study investigated the effect of foam core density, face thickness, core thickness, and size of the loading area. It was found that panels with low-density cores were more susceptible to face-wrinkling failure, while panels with high-density cores were susceptible to both tensile rupture and core-punching shear failure. It was also shown that an increase in the diameter of the loading area decreased the effect of localized deformation for panels with high-density (96 kg/m3) cores.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would also like to acknowledge and thank NSERC, Queen’s University, and Dalhousie University for their financial support.
References
Allen, H. G. 1969. Analysis and structural design of sandwich panels. Oxford, UK: Pergamon Press.
ASTM. 2014. Standard test method for tensile properties of plastics. Annual Book of ASTM Standards. ASTM D638. West Conshohocken, PA: ASTM.
ASTM. 2017. Standard test method for tensile properties of polymer matrix composite materials. Annual Book of ASTM Standards. ASTM D3039/D3039M. West Conshohocken, PA: ASTM.
ASTM. 2018a. Standard test method for in-plane shear response of polymer matrix composite materials by tensile test of a ±45° laminate. Annual Book of ASTM Standards. ASTM D3518/D3518M. West Conshohocken, PA: ASTM.
ASTM. 2018b. Standard test method for shear properties of sandwich core materials. Annual Book of ASTM Standards. ASTM C273/C273M. West Conshohocken, PA: ASTM.
Besant, T., G. A. O. Davies, and D. Hitchings. 2001. “Finite element modeling of low velocity impact of composite sandwich panels.” Composites, Part A 32 (9): 1189–1196. https://doi.org/10.1016/S1359-835X(01)00084-7.
Betts, D., P. Sadeghian, and A. Fam. 2018. “Experimental behavior and design-oriented analysis of sandwich beams with bio-based composite facings and foam cores.” J. Compos. Constr. 22 (4): 1–12. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000856.
Betts, D., P. Sadeghian, and A. Fam. 2020. “Experiments and nonlinear analysis of the impact behavior of sandwich panels constructed with flax fiber-reinforced polymer faces and foam cores.” J. Sandwich Struct. Mater. 23 (7): 3139–3163. https://doi.org/10.1177/1099636220925073.
Betts, D., P. Sadeghian, and A. Fam. 2021. “Post-impact residual strength and resilience of sandwich panels with natural fiber composite faces.” J. Build. Eng. 38: 102184. https://doi.org/10.1016/j.jobe.2021.102184.
Boria, S., E. Raponi, F. Sarasini, J. Tirillò, and L. Lampani. 2018. “Green sandwich structures under impact: Experimental vs numerical analysis.” Procedia Struct. Integrity 12: 317–329. https://doi.org/10.1016/j.prostr.2018.11.084.
Christian, S. J., and S. L. Billington. 2011. “Mechanical response of PHB- and cellulose acetate natural fiber-reinforced composites for construction applications.” Composites, Part B 42 (7): 1920–1928. https://doi.org/10.1016/j.compositesb.2011.05.039.
Cicala, G., G. Cristaldi, G. Recca, and A. Latteri. 2010. “Composites based on natural fibre fabrics.” In Woven fabric engineering, edited by P. D. Dubrovski. London: IntechOpen.
CoDyre, L., K. Mak, and A. Fam. 2018. “Flexural and axial behavior of sandwich panels with bio-based flax fiber-reinforced polymer skins and various foam core densities.” J. Sandwich Struct. Mater. 20 (5): 595–616. https://doi.org/10.1177/1099636216667658.
Dawood, M., E. Taylor, and S. Rizkalla. 2010. “Two-way bending behavior of 3-D GFRP sandwich panels with through-thickness fiber insertions.” Compos. Struct. 92 (4): 950–963. https://doi.org/10.1016/j.compstruct.2009.09.040.
Dynamore. 2018. Guideline for implicit analyses using LS-DYNA. Stuttgart, Germany: Dynamore.
Elliott Company. 2016a. ELFOAM p400 polyisocyanurate foam. Indianapolis: Elliott Company.
Elliott Company. 2016b. ELFOAM p200 polyisocyanurate foam. Indianapolis: Elliott Company.
Fam, A., T. Sharaf, and P. Sadeghian. 2016. “Fiber element model of sandwich panels with soft cores and composite skins in bending considering large shear deformations and localized skin wrinkling.” J. Eng. Mech. 142 (5): 1–14. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001062.
Feng, D., and F. Aymerich. 2013. “Damage prediction in composite sandwich panels subjected to low-velocity impact.” Composites, Part A 52: 12–22https://doi.org/10.1016/j.compositesa.2013.04.010.
Gere, J. M., and B. J. Goodno. 2008. Mechanics of materials. Stamford, CT: Cengage Learning.
LSTC (Livermore Software Technology Corporation). n.d. LS DYNA. Livermore, CA: LSTC.
Mak, K., and A. Fam. 2019. “Performance of flax-FRP sandwich panels exposed to different ambient temperatures.” Constr. Build. Mater. 219: 121–130. https://doi.org/10.1016/j.conbuildmat.2019.05.118.
Mak, K., A. Fam, and C. Macdougall. 2015. “Flexural behavior of sandwich panels with bio-FRP skins made of flax fibers and epoxidized pine-oil resin.” J. Compos. Constr. 19 (2003): 1–13. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000560.
Meo, M., R. Vignjevic, and G. Marengo. 2005. “The response of honeycomb sandwich panels under low-velocity impact loading.” Int. J. Mech. Sci. 47 (9): 1301–1325. https://doi.org/10.1016/j.ijmecsci.2005.05.006.
Sadeghian, P., D. Hristozov, and L. Wroblewski. 2018. “Experimental and analytical behavior of sandwich composite beams: Comparison of natural and synthetic materials.” J. Sandwich Struct. Mater. 20 (3): 287–307. https://doi.org/10.1177/1099636216649891.
Satasivam, S., Y. Bai, Y. Yang, L. Zhu, and X. L. Zhao. 2018. “Mechanical performance of two-way modular FRP sandwich slabs.” Compos. Struct. 184 (March 2017): 904–916. https://doi.org/10.1016/j.compstruct.2017.10.026.
Sharaf, T., and A. Fam. 2012. “Numerical modeling of sandwich panels with soft core and different rib configurations.” J. Reinf. Plast. Compos. 31 (11): 771–784. https://doi.org/10.1177/0731684412445494.
Zhang, D., D. Jiang, Q. Fei, and S. Wu. 2016. “Experimental and numerical investigation on indentation and energy absorption of a honeycomb sandwich panel under low-velocity impact.” Finite Elem. Anal. Des. 117–118: 21–30. https://doi.org/10.1016/j.finel.2016.04.003.
Zhou, J., M. Z. Hassan, Z. Guan, and W. J. Cantwell. 2012. “The low velocity impact response of foam-based sandwich panels.” Compos. Sci. Technol. 72 (14): 1781–1790. https://doi.org/10.1016/j.compscitech.2012.07.006.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jan 23, 2022
Accepted: Sep 21, 2022
Published online: Dec 6, 2022
Published in print: Feb 1, 2023
Discussion open until: May 6, 2023
ASCE Technical Topics:
- Analysis (by type)
- Continuum mechanics
- Deformation (mechanics)
- Engineering fundamentals
- Engineering mechanics
- Failure analysis
- Failure modes
- Finite element method
- Forensic engineering
- Material mechanics
- Material properties
- Materials engineering
- Methodology (by type)
- Numerical methods
- Panels (structural)
- Research methods (by type)
- Sandwich panels
- Shear failures
- Solid mechanics
- Structural engineering
- Structural mechanics
- Structural members
- Structural systems
- Thickness
- Verification
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.