A Mass-Optimal Spatial Tensegrity Structure to Support a Cantilever Load
Publication: Journal of Aerospace Engineering
Volume 36, Issue 4
Abstract
A spatial, discrete Michell truss to support a cantilever load is proposed in this paper. The node placement scheme is designed to iteratively generate the topology of the joints for the tensegrity structure. A recursive formula for the member forces is derived to compute the minimum volume of material needed to support a cantilever load. An example is provided with comparisons to the planar result special case. This example demonstrates that the benefit of supporting out of plane loads comes at a minor cost of additional mass. Further, a practical realization of the planar special case is compared to the proposed truss to demonstrate improved mass efficiency over conventional trusses.
Practical Applications
Tensegrity structures have been proven to be the optimal mass solution to the canonical loading conditions: bending, simply supported, torsion, compression, and tension. Further, the geometry of tensegrity structures can be efficiently manipulated through member length actuation. This allows for compact storage and subsequent deployment, which is economically attractive for space-based ventures where volume and mass are a precious commodity. The spatial discrete Michell truss in this work enjoys similar deployment capabilities, as the structure can wrap about its circular base when not in use. This work enables a practical realization of an optimal planar tensegrity structure, at the cost of marginal mass increase. This structure can support out of plane cantilever forces, which is not permissible in planar theory.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors wish to acknowledge the Office of Naval Research (Grant No. N00014-19-1-2435) for partially supporting this work. The authors are grateful to Prof. Robert E. Skelton for introducing them to the exciting area of tensegrity structural systems.
References
Ashwear, N., and A. Eriksson. 2014. “Natural frequencies describe the pre-stress in tensegrity structures.” Comput. Struct. 138 (Jul): 162–171. https://doi.org/10.1016/j.compstruc.2014.01.020.
Calladine, C. 1978. “Buckminster Fuller’s ‘tensegrity’ structures and Clerk Maxwell’s rules for the construction of stiff frames.” Int. J. Solids Struct. 14 (2): 161–172. https://doi.org/10.1016/0020-7683(78)90052-5.
Carpentieri, G., R. E. Skelton, and F. Fraternali. 2015. “Minimum mass and optimal complexity of planar tensegrity bridges.” Int. J. Space Struct. 30 (3–4): 221–243. https://doi.org/10.1260/0266-3511.30.3-4.221.
Goyal, R., M. Chen, M. Majji, and R. Skelton. 2019. “Motes: Modeling of tensegrity structures.” J. Open Source Software 4 (42): 1613. https://doi.org/10.21105/joss.01613.
Goyal, R., and R. E. Skelton. 2019. “Tensegrity system dynamics with rigid bars and massive strings.” Multibody Syst. Dyn. 46 (3): 203–228. https://doi.org/10.1007/s11044-019-09666-4.
Graczykowski, C., and T. Lewiński. 2007. “Michell cantilevers constructed within trapezoidal domains.” Struct. Multidiscip. Optim. 33 (2): 113–129. https://doi.org/10.1007/s00158-005-0602-5.
Hemp, W. S. 1973. Optimum structures. Oxford: Clarendon Press.
Koohestani, K. 2012. “Form-finding of tensegrity structures via genetic algorithm.” Int. J. Solids Struct. 49 (5): 739–747. https://doi.org/10.1016/j.ijsolstr.2011.11.015.
Lógó, J., and H. Ismail. 2020. “Milestones in the 150-year history of topology optimization: A review.” Comput. Assisted Method Eng. Sci. 27 (2–3): 97–132. https://doi.org/10.24423/cames.296.
Micheletti, A., and P. Podio-Guidugli. 2022. “Seventy years of tensegrities (and counting).” Arch. Appl. Mech. 92 (9): 2525–2548. https://doi.org/10.1007/s00419-022-02192-4.
Michell, A. G. M. 1904. “LVIII. The limits of economy of material in frame-structures.” London Edinburgh Dublin Philos. Mag. J. Sci. 8 (47): 589–597. https://doi.org/10.1080/14786440409463229.
Pugh, A. 1976. An introduction to tensegrity. Berkeley, CA: Univ. of California Press.
Rozvany, G., and W. Gollub. 1990. “Michell layouts for various combinations of line supports—I.” Int. J. Mech. Sci. 32 (12): 1021–1043. https://doi.org/10.1016/0020-7403(90)90006-5.
Rozvany, G. I. 1996. “Some shortcomings in Michell’s truss theory.” Struct. Optim. 12 (4): 244–250. https://doi.org/10.1007/BF01197364.
Schek, H.-J. 1974. “The force density method for form finding and computation of general networks.” Comput. Methods Appl. Mech. Eng. 3 (1): 115–134. https://doi.org/10.1016/0045-7825(74)90045-0.
Skelton, R. E., and M. C. de Oliveira. 2009. Vol. 1 of Tensegrity systems. Dordrecht: Springer.
Skelton, R. E., and M. C. de Oliveira. 2010. “Optimal tensegrity structures in bending: The discrete Michell truss.” J. Franklin Inst. 347 (1): 257–283. https://doi.org/10.1016/j.jfranklin.2009.10.009.
Stolpe, M. 2016. “Truss optimization with discrete design variables: A critical review.” Struct. Multidiscip. Optim. 53 (2): 349–374. https://doi.org/10.1007/s00158-015-1333-x.
Sultan, C., M. Corless, and R. E. Skelton. 2001. “The prestressability problem of tensegrity structures: Some analytical solutions.” Int. J. Solids Struct. 38 (30–31): 5223–5252. https://doi.org/10.1016/S0020-7683(00)00401-7.
Sultan, C., and R. Skelton. 2003. “Tensegrity structures prestressability investigation.” Int. J. Space Struct. 18 (1): 15–30. https://doi.org/10.1260/026635103769016609.
Tibert, A., and S. Pellegrino. 2003. “Review of form-finding methods for tensegrity structures.” Int. J. Space Struct. 18 (4): 209–223. https://doi.org/10.1260/026635103322987940.
Zhang, P., and J. Feng. 2017. “Initial prestress design and optimization of tensegrity systems based on symmetry and stiffness.” Int. J. Solids Struct. 106–107 (Feb): 68–90. https://doi.org/10.1016/j.ijsolstr.2016.11.030.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Dec 2, 2021
Accepted: Nov 23, 2022
Published online: Mar 24, 2023
Published in print: Jul 1, 2023
Discussion open until: Aug 24, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.