Analysis of Love-Type Waves in Functionally Graded Composite Structure with Interfacial Imperfections
Publication: International Journal of Geomechanics
Volume 24, Issue 8
Abstract
Love-type wave propagation in a functionally graded material bonded by a layer of functionally graded fiber-reinforced material and an elastic half-space is investigated in this paper. The mechanical imperfections at the common interface between the layers and half-space have been considered. Solutions to mechanical displacements are obtained by solving the coupled field equations of the layers and elastic half-space with the help of the separation of variables technique. Appropriate boundary conditions have been applied to establish the dispersion equations for Love-type wave propagation in imperfect and perfect interfaces. Dispersion curves have been plotted to illustrate the significant effects of parameters such as gradient coefficients, reinforcement, interfacial imperfection, and thickness ratio on the phase velocity of Love-type wave propagation. This paper presents graphical demonstrations of the effects of each parameter under imperfect and perfect cases, and provides a detailed theoretical discussion of these parameters. This study can provide theoretical guidance for designing and optimizing functionally graded materials-based devices.
Practical Applications
This study examines functionally graded materials in engineering, exploring their classification, mathematical formulations, application in solving specific problems, analytical methodologies, and obstacles impeding their widespread use. This study is innovative and relevant to aerospace, civil engineering, and construction applications. In aerospace engineering, these materials can be used for structural components like panels, wings, and fuselage parts due to their lightweight nature and high strength-to-weight ratio. It can be used for reinforced concrete structures in civil engineering and building construction, offering enhanced strength and durability. Therefore, examining the propagation of Love-type waves in these structures is crucial. Finally, we illustrate the effects of various parameters where grading the facings of a composite structure results in an impressive improvement in its stability and dispersive characteristics. Therefore, the results could lead to significant advances in analysis and exploration in aerospace, building construction, civil engineering, geophysics, and geomechanics.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or codes generated or analyzed during this study are available from the corresponding author on reasonable request.
Acknowledgments
The authors express their gratitude to the Indian Institute of Technology (ISM) for granting access to all the necessary research facilities.
References
Abo-Dahab, S. 2018. “Surface waves in fiber-reinforced anisotropic general viscoelastic media of higher orders with voids, rotation, and electromagnetic field.” Mech. Adv. Mater. Struct. 25 (4): 319–334. https://doi.org/10.1080/15376494.2016.1255827.
Achenbach, J. 2012. Wave propagation in elastic solids. Amsterdam, Netherlands: Elsevier.
Agustin, U. 1999. Principles of seismology. Cambridge: Cambridge University Press.
Alam, P., S. Kundu, I. Badruddin, and T. Khan. 2019. “Dispersion and attenuation characteristics of Love-type waves in a fiber-reinforced composite over a viscoelastic substrate.” Phys. Wave Phenom. 27 (4): 281–289. https://doi.org/10.3103/S1541308X19040083.
Balvantín, A., A. Baltazar, and J. I. Aranda-Sanchez. 2012. “A study of guided wave propagation on a plate between two solid bodies with imperfect boundary conditions.” Int. J. Mech. Sci. 63 (1): 66–73. https://doi.org/10.1016/j.ijmecsci.2012.06.013.
Belfield, A., T. Rogers, and A. Spencer. 1983. “Stress in elastic plates reinforced by fibres lying in concentric circles.” J. Mech. Phys. Solids 31 (1): 25–54. https://doi.org/10.1016/0022-5096(83)90018-2.
Biot, M. A. 1965. Mechanics of incremental deformations. New York: John Wiley & Sons.
Bullen, K. 1963. An introduction to the theory of seismology. New York: Cambridge University Press.
Chattopadhyay, A., A. Singh, and S. Dhua. 2014. “Effect of heterogeneity and reinforcement on propagation of a crack due to shear waves.” Int. J. Geomech. 14 (4): 04014013. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000356.
Craster, R., L. Joseph, and J. Kaplunov. 2014. “Long-wave asymptotic theories: the connection between functionally graded waveguides and periodic media.” Wave Motion 51 (4): 581–588. https://doi.org/10.1016/j.wavemoti.2013.09.007.
Dai, Q., Y. Liu, Z. Qin, and F. Chu. 2022. “Damping and frequency response characteristics of functionally graded fiber-reinforced composite cylindrical shells.” Int. J. Struct. Stab. Dyn. 22 (09): 2250107. https://doi.org/10.1142/S0219455422501073.
Dhua, S., M. Chatterjee, and A. Chattopadhyay. 2022. “Reflection and transmission of three-dimensional plane wave between distinct fiber-reinforced medium under initial stress.” Mech. Adv. Mater. Struct. 29 (26): 5108–5121. https://doi.org/10.1080/15376494.2021.1948638.
Ewing, W. M., W. S. Jardetzky, F. Press, and A. Beiser. 1957. “Elastic waves in layered media.” Phys. Today 10 (12): 27–28. https://doi.org/10.1063/1.3060203.
Goyal, S., S. Sahu, and S. Mondal. 2020. “Influence of imperfect bonding on the reflection and transmission of QP-wave at the interface of two functionally graded piezoelectric materials.” Wave Motion 92: 102431. https://doi.org/10.1016/j.wavemoti.2019.102431.
Gubbins, D. 1990. Seismology and plate tectonics. Cambridge: Cambridge University Press.
Guo, X., P. Wei, and L. Li. 2016. “Dispersion relations of elastic waves in one-dimensional piezoelectric phononic crystal with mechanically and dielectrically imperfect interfaces.” Mech. Mater. 93: 168–183. https://doi.org/10.1016/j.mechmat.2015.11.004.
Gupta, S., M. Ahmed, and J. C. Misra. 2019. “Effects of periodic corrugated boundary surfaces on plane SH-waves in fiber-reinforced medium over a semi-infinite micropolar solid under the action of magnetic field.” Mech. Res. Commun. 95: 35–44. https://doi.org/10.1016/j.mechrescom.2018.11.007.
Gupta, S., N. Bhengra, and M. Ahmed. 2018. “The study of reflection/transmission phenomena in a corrugated interface between two magnetoelastic transversely isotropic media.” Arabian J. Geosci. 11 (1): 1–17. https://doi.org/10.1007/s12517-017-3236-1.
Gupta, S., S. Das, and R. Dutta. 2021. “Nonlocal stress analysis of an irregular FGFPM structure imperfectly bonded to fiber-reinforced substrate subjected to moving load.” Soil Dyn. Earthquake Eng. 147: 106744. https://doi.org/10.1016/j.soildyn.2021.106744.
Han, X., and G. Liu. 2003. “Elastic waves in a functionally graded piezoelectric cylinder.” Smart Mater. Struct. 12 (6): 962–971. https://doi.org/10.1088/0964-1726/12/6/014.
Han, X., G. Liu, and K. Lam. 2001a. “Transient waves in plates of functionally graded materials.” Int. J. Numer. Methods Eng. 52 (8): 851–865. https://doi.org/10.1002/nme.v52:8.
Han, X., G. Liu, Z. Xi, and K. Lam. 2001b. “Transient waves in a functionally graded cylinder.” Int. J. Solids Struct. 38 (17): 3021–3037. https://doi.org/10.1016/S0020-7683(00)00219-5.
Han, X., G. Liu, Z. Xi, and K. Lam. 2002. “Characteristics of waves in a functionally graded cylinder.” Int. J. Numer. Methods Eng. 53 (3): 653–676. https://doi.org/10.1002/nme.v53:3.
Hill, R. 1961. Chap. 6 in Vol. 11 of Progress in solid state mechanics, edited by I. N. Sneddon and R. Hill, 268. Amsterdam, Netherlands: North Holland.
Hosseini-Hashemi, S., H. R. D. Taher, H. Akhavan, and M. Omidi. 2010. “Free vibration of functionally graded rectangular plates using first-order shear deformation plate theory.” Appl. Math. Modell. 34 (5): 1276–1291. https://doi.org/10.1016/j.apm.2009.08.008.
Kumhar, R., S. Kundu, D. K. Pandit, and S. Gupta. 2020. “Green’s function and surface waves in a viscoelastic orthotropic FGM enforced by an impulsive point source.” Appl. Math. Comput. 382: 125325. https://doi.org/10.1016/j.amc.2020.125325.
Kundu, S., R. Kumhar, M. Maity, and S. Gupta. 2020. “Influence of point source on love-type waves in anisotropic layer overlying viscoelastic FGM half-space: Green’s function approach.” Int. J. Geomech. 20 (1): 04019141. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001531.
Liu, H., Z. Wang, and T. Wang. 2001. “Effect of initial stress on the propagation behavior of Love waves in a layered piezoelectric structure.” Int. J. Solids Struct. 38 (1): 37–51. https://doi.org/10.1016/S0020-7683(00)00009-3.
Love, A. 1920. Mathematical theory of elasticity. Cambridge: Cambridge University Press.
Maji, A., and S. Dhua. 2023. “Propagation of magnetoelastic shear wave in an initially stressed inhomogeneous composite-layered structure with an imperfect interface.” Int. J. Geomech. 23 (12): 04023221. https://doi.org/10.1061/IJGNAI.GMENG-8860.
Manna, S., S. Kundu, and S. Gupta. 2016. “Effect of reinforcement and inhomogeneity on the propagation of Love waves.” Int. J. Geomech. 16 (2): 04015045. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000517.
Markham, M. 1970. “Measurement of the elastic constants of fibre composites by ultrasonics.” Composites 1 (3): 145–149. https://doi.org/10.1016/0010-4361(70)90477-5.
Murty, G. S. 1976. “Reflection, transmission and attenuation of elastic waves at a loosely-bonded interface of two half spaces.” Geophys. J. Int. 44 (2): 389–404. https://doi.org/10.1111/j.1365-246X.1976.tb03663.x.
Nath, A., and S. Dhua. 2022. “Influence of initial stress on shear wave scattering in a functionally graded magneto-visco-elastic orthotropic multi-layered structure.” Waves Random Complex Medium: 1–25. https://doi.org/10.1080/17455030.2022.2033881.
Nath, A., and S. Dhua. 2023. “Love-type waves generated by an impulsive source in a conductive polymer-coated piezoelectric composite structure.” Acta Mech. 235 (2): 1027–1050. https://doi.org/10.1007/s00707-023-03792-z.
Nejati, M., A. Eslampanah, and M. Najafizadeh. 2016. “Buckling and vibration analysis of functionally graded carbon nanotube-reinforced beam under axial load.” Int. J. Appl. Mech. 8 (1): 1650008. https://doi.org/10.1142/S1758825116500083.
Nejati, M., M. Yas, A. Eslampanah, and M. Bagheriasl. 2017. “Extended three-dimensional generalized differential quadrature method: The basic equations and thermal vibration analysis of functionally graded fiber orientation rectangular plates.” Int. J. Appl. Mech. 24 (10): 854–870. https://doi.org/10.1080/15376494.2016.1196789.
Pandit, D. K., S. Kundu, and S. Gupta. 2017. “Propagation of Love waves in a prestressed Voigt-type viscoelastic orthotropic functionally graded layer over a porous half-space.” Acta Mech. 228 (3): 871–880. https://doi.org/10.1007/s00707-016-1741-z.
Qian, Z., F. Jin, Z. Wang, and K. Kishimoto. 2007. “Transverse surface waves on a piezoelectric material carrying a functionally graded layer of finite thickness.” Int. J. Eng. Sci. 45 (2–8): 455–466. https://doi.org/10.1016/j.ijengsci.2007.03.009.
Qian, Z.-H., F. Jin, and S. Hirose. 2011. “Effects of covering layer thickness on Love waves in functionally graded piezoelectric substrates.” Arch. Appl. Mech. 81 (11): 1743–1755. https://doi.org/10.1007/s00419-011-0515-2.
Qian, Z.-H., F. Jin, K. Kishimoto, and T. Lu. 2009. “Propagation behavior of Love waves in a functionally graded half-space with initial stress.” Int. J. Solids Struct. 46 (6): 1354–1361. https://doi.org/10.1016/j.ijsolstr.2008.11.003.
Sadab, M., and S. Kundu. 2023. “SH-wave propagation in double layers imperfectly bonded over a dry sandy half-space.” Int. J. Geomech. 23 (12): 04023228. https://doi.org/10.1061/IJGNAI.GMENG-8698.
Singh, A. K., A. Das, A. Chattopadhyay, and S. Dhua. 2015. “Dispersion of shear wave propagating in vertically heterogeneous double layers overlying an initially stressed isotropic half-space.” Soil Dyn. Earthquake Eng. 69: 16–27. https://doi.org/10.1016/j.soildyn.2014.10.021.
Singh, A. K., T. Kaur, S. Saha, S. Kumar, and A. Chattopadhyay. 2021. “Study on propagation characteristics of SH-wave in an imperfectly bonded functionally graded structure with viscoelastic stratum and fibre-reinforced substrate.” Arabian J. Geosci. 14 (1): 1–15. https://doi.org/10.1007/s12517-020-06304-8.
Thomopoulos, S., V. Birman, and G. M. Genin. 2012. Structural interfaces and attachments in biology. Berlin: Springer Science & Business Media.
Wang, C.-D., H.-T. Chou, and D.-H. Peng. 2017. “Love-wave propagation in an inhomogeneous orthotropic medium obeying the exponential and generalized power law models.” Int. J. Geomech. 17 (7): 04017003. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000870.
Wang, H., and Z. Zhao. 2013. “Love waves in a two-layered piezoelectric/elastic composite plate with an imperfect interface.” Arch. Appl. Mech. 83 (1): 43–51. https://doi.org/10.1007/s00419-012-0631-7.
Zheng, X., H. Chen, and Z. Ma. 2018. “Shakedown boundaries of multilayered thermal barrier systems considering interface imperfections.” Int. J. Mech. Sci. 144: 33–40. https://doi.org/10.1016/j.ijmecsci.2018.05.016.
Zhu, H., L. Zhang, J. Han, and Y. Zhang. 2014. “Love wave in an isotropic homogeneous elastic half-space with a functionally graded cap layer.” Appl. Math. Comput. 231: 93–99. https://doi.org/10.1016/j.amc.2013.12.167.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 24 • Issue 8 • August 2024
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Sep 21, 2023
Accepted: Feb 28, 2024
Published online: Jun 13, 2024
Published in print: Aug 1, 2024
Discussion open until: Nov 13, 2024
ASCE Technical Topics:
- Composite materials
- Composite structures
- Continuum mechanics
- Dynamics (solid mechanics)
- Elastic analysis
- Engineering fundamentals
- Engineering materials (by type)
- Engineering mechanics
- Fiber reinforced composites
- Geometry
- Half space
- Materials engineering
- Mathematics
- Parameters (statistics)
- Solid mechanics
- Statistics
- Structural analysis
- Structural engineering
- Structures (by type)
- Wave equations
- Wave propagation
- Waves (mechanics)
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.