Equivalent Design Strengths for Spatially Variable Cement-Treated Soil Slope
Publication: International Journal of Geomechanics
Volume 23, Issue 11
Abstract
Deep soil mixing and jet grouting are in situ ground improvement techniques that are often used to enhance the stability of soft soil slopes for excavation and waterway projects. Although researchers have reported spatial variability in cement-treated ground, the literature on the influence of spatial variability on the stability of treated soil slopes is limited. In this study, the stability of a cement-treated soil slope is analyzed through two-dimensional random finite-element analysis, taking into consideration spatial variabilities in strength and unit weight of a cement-treated soil mass. Spatial parameters such as the mean strength µqu, coefficient of variation COV, horizontal scale of fluctuation SOFh, and vertical scale of fluctuation SOFv are varied, and the equivalent design strengths and strength reduction factors are calculated. Furthermore, strength reduction factors for isotropic (SOFh/SOFv = 1) and anisotropic (SOFh/SOFv = 7.5) spatially correlated random fields are calculated. The results show that an increasing value of SOFh has a worsening effect on stability up to a particular value, that is, approximately 2.0 times the slope width B, beyond which the influence does not appear to be significant. A strong logarithmic relationship between the SOFh/B ratio and the computed strength reduction factors is observed. Finally, a modified equation for the strength reduction factor is proposed; in this equation, the effect of the scale of fluctuation is considered by introducing an influence factor RSOF. For SOFh/B ratios ranging from 0.02 to 0.7, RSOF varies from 1.0 to approximately 2.0, indicating a significant effect of the scale of fluctuation. However, for SOFh/SOFv ranging from 1 to 7.5, RSOF varies slightly.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data and models that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors are thankful to the Ministry of Education, Government of India, for providing a financial assistantship to the second author during his M.Tech. program.
References
Allahverdizadeh, P., D. V. Griffiths, and G. A. Fenton. 2015. “The random finite-element method in probabilistic slope stability analysis with consideration of spatial variability of soil properties.” In Proc., Int. Foundations Congress and Equipment Expo 2015, Geotechnical Special Publication 256, edited by M. Iskander, M. T. Suleiman, J. B. Anderson, and D. F. Laefer, 1946–1955. Reston, VA: ASCE.
Al-Naqshabandy, M. S., N. Bergman, and S. Larsson. 2012. “Strength variability in lime-cement columns based on cone penetration test data.” Proc. Inst. Civ. Eng. Ground Improv. 165 (1): 15–30. https://doi.org/10.1680/grim.2012.165.1.15.
Arnold, M., K. Beckhaus, and U. Weidenmann. 2011. “Cut-off wall construction using Cutter Soil Mixing: A case study.” Geotechnik 34 (1): 11–21. https://doi.org/10.1002/gete.201000021.
Arulrajah, A., and M. W. Bo. 2008. “Characteristics of Singapore marine clay at Changi.” Geotech. Geol. Eng. 26 (4): 431–441. https://doi.org/10.1007/s10706-008-9179-2.
Bergado, D. T., T. Ruenkrairergsa, Y. Taesiri, and A. S. Balasubramaniam. 1999. “Deep soil mixing used to reduce embankment settlement.” Proc. Inst. Civ. Eng. Ground Improv. 3 (4): 145–162. https://doi.org/10.1680/gi.1999.030402.
Bo, M. W., V. Choa, and K. H. Hong. 2003. “Material characterization of Singapore marine clay at Changi.” Q. J. Eng. Geol. Hydrogeol. 36 (4): 305–319. https://doi.org/10.1144/1470-9236/03-009.
Bruce, D. A. 2000. An introduction to the deep soil mixing methods as used in geotechnical applications. Publication No. FHWA-RD-99-138. Washington, DC: DOT, Federal Highway Administration.
BSI (British Standards Institution). 2002. Basis of structural design. BS EN 1990:2002: Eurocode 0. London: BSI.
BSI (British Standards Institution). 2004. Geotechnical design—Part 1: General rules. BS EN 1997-1:2004: Eurocode 7. London: BSI.
Burke, G. K., and A. L. Sehn. 2005. “An analysis of single axis wet mix performance.” In Vol. 1.1 of Proc., Int. Conf. on Deep Mixing Best Practice and Recent Advances, 41–46. Sweden: Swedish Geotechnical Institute.
CDIT (Coastal Development Institute of Technology). 2002. The deep mixing method: Principle, design, and construction. Lisse, Netherlands: Swets & Zeitlinger.
Chen, J., F. H. Lee, and C. C. Ng. 2011. “Statistical analysis for strength variation of deep mixing columns in Singapore.” In Proc., Geo-Frontiers 2011: Advances in Geotechnical Engineering, Geotechnical Special Publication 211, edited by J. Han and D. E. Alzamora, 576–584. Reston, VA: ASCE.
Ching, J., K.-K. Phoon, and S.-P. Sung. 2017. “Worst case scale of fluctuation in basal heave analysis involving spatially variable clays.” Struct. Saf. 68: 28–42. https://doi.org/10.1016/j.strusafe.2017.05.008.
Cho, S. E. 2007. “Effects of spatial variability of soil properties on slope stability.” Eng. Geol. 92 (3–4): 97–109. https://doi.org/10.1016/j.enggeo.2007.03.006.
Chu, J., and K. W. Leong. 2017. “State-of-the-practice in ground improvement in Singapore.” In Proc., 10th Anniversary Conf. Geotechnical Society of Singapore. Singapore: Geotechnical Society of Singapore.
Croce, P., and A. Flora. 1998. “Effects of jet grouting in pyroclastic soils.” Rivista Italiana di Geotecnica 32 (2): 5–14.
Croce, P., A. Gajo, L. Mongiovì, and A. Zaninetti. 1994. “Una verifica sperimentale degli effetti della gettiniezione.” [In Italian.] Rivista Italiana di Geotecnica 28 (2): 91–101.
Denies, N., N. Huybrechts, F. De Cock, B. Lameire, A. Vervoort, G. Van Lysebetten, and J. Maertens. 2012. “Soil mix walls as retaining structures – mechanical characterization.” In Vol. 3 of Proc., TC 211 Int. Symp. & Short Courses “Recent Research, Advances & Execution Aspects of Ground Improvement Works,” 99–115. Belgium: ISSMGE.
De Paoli, B., R. Tornaghi, and D. A. Bruce. 1989. “Jet grout stabilization of peaty soils under a railway embankment in Italy.” In Proc., Congress Sponsored by the Geotechnical Engineering Division and the Construction Division, Foundation Engineering: Current Principles and Practice, edited by F. H. Kulhawy, 272–290. New York: ASCE.
Duncan, J. M. 1996. “Soil slope stability analysis.” Chap. 13 in Landslides: Investigation and mitigation, edited by A. K. Turner and R. L. Schuster, 337–371. Washington, DC: Transportation Research Board. Special Report 247.
Essler, R., and H. Yoshida. 2004. In Vol. 2 of Ground improvement, edited by M. P. Moseley and K. Kirsch, 160–196. London: Taylor and Francis Group.
Fiorotto, R., M. Schöpf, and E. Stötzer. 2005. “Cutter soil mixing (CSM) – An innovation in soil mixing for creating cut-off and retaining walls.” In Proc., 16th Int. Conf. on Soil Mechanics and Geotechnical Engineering, 1185–1188. Amsterdam, The Netherlands: IOS Press.
Ganne, P., N. Huybrechts, F. De Cock, B. Lameire, and J. Maertens. 2010. “Soil mix walls as retaining structures–critical analysis of the material design parameters.” In Vol. 3 of Proc., Int. Conf. on Geotechnical Challenges in Megacities, 991–998. St. Petersburg, Russia: GRF.
Griffiths, D. V., and G. A. Fenton. 2007. “The random finite element method in slope stability analysis.” In Vol. 491 of Probabilistic Methods in Geotechnical Engineering, edited by D. V. Griffiths and G. A. Fenton, 317–346. Vienna, Austria: Springer. CISM Courses and Lectures.
Griffiths, D. V., J. Huang, and G. A. Fenton. 2009. “On the reliability of earth slopes in three dimensions.” In Vol. 465 of Proc., Royal Society A, 3145–3164. London: The Royal Society.
Haldar, A., and S. Mahadevan. 2000. Reliability assessment using stochastic finite element analysis. New York: Wiley.
Honjo, Y. 1982. “A probabilistic approach to evaluate shear strength of heterogeneous stabilized ground by deep mixing method.” Soils Found. 22 (1): 23–38. https://doi.org/10.3208/sandf1972.22.23.
Huang, J., and D. V. Griffiths. 2015. “Determining an appropriate finite element size for modelling the strength of undrained random soils.” Comput. Geotech. 69: 506–513. https://doi.org/10.1016/j.compgeo.2015.06.020.
Indraratna, B., A. S. Balasubramaniam, and S. Balachandran. 1992. “Performance of test embankment constructed to failure on soft marine clay.” J. Geotech. Eng. 118 (1): 12–33. https://doi.org/10.1061/(ASCE)0733-9410(1992)118:1(12).
Kamruzzaman, A. H., S. H. Chew, and F. H. Lee. 2009. “Structuration and destructuration behavior of cement-treated Singapore marine clay.” J. Geotech. Geoenviron. Eng. 135 (4): 573–589. https://doi.org/10.1061/(ASCE)1090-0241(2009)135:4(573).
Kasama, K., A. J. Whittle, and K. Zen. 2012. “Effect of spatial variability on the bearing capacity of cement-treated ground.” Soils Found. 52 (4): 600–619. https://doi.org/10.1016/j.sandf.2012.07.003.
Kasama, K., and A. J. Whittle. 2016. “Effect of spatial variability on the slope stability using Random Field Numerical Limit Analyses.” Georisk 10 (1): 42–54.
Larsson, S., and A. Nilsson. 2009. “Horizontal strength variability in lime-cement columns.” In Proc., Int. Symp. on Deep Mixing and Admixture Stabilization, 629–634. Japan: Sanwa Co. Ltd.
Larsson, S., H. Stille, and L. Olsson. 2005. “On horizontal variability in lime-cement columns in deep mixing.” Géotechnique 55 (1): 33–44. https://doi.org/10.1680/geot.2005.55.1.33.
Liu, Y., L. Q. He, Y. J. Jiang, M. M. Sun, E. J. Chen, and F.-H. Lee. 2019. “Effect of in situ water content variation on the spatial variation of strength of deep cement-mixed clay.” Géotechnique 69 (5): 391–405. https://doi.org/10.1680/jgeot.17.P.149.
Liu, Y., Y. J. Jiang, H. Xiao, and F. H. Lee. 2017. “Determination of representative strength of deep cement-mixed clay from core strength data.” Géotechnique 67 (4): 350–364. https://doi.org/10.1680/jgeot.16.P.105.
Liu, Y., F.-H. Lee, S.-T. Quek, and M. Beer. 2014. “Modified linear estimation method for generating multi-dimensional multivariate Gaussian field in modelling material properties.” Probab. Eng. Mech. 38 (October): 42–53. https://doi.org/10.1016/j.probengmech.2014.09.001.
Liu, Y., F.-H. Lee, S.-T. Quek, E. J. Chen, and J.-T. Yi. 2015. “Effect of spatial variation of strength and modulus on the lateral compression response of cement-admixed clay slab.” Géotechnique 65 (10): 851–865. https://doi.org/10.1680/jgeot.14.P.254.
Liu, Y., H. Xiao, K. Yao, J. Hu, and H. Wei. 2018a. “Rock-soil slope stability analysis by two-phase random media and finite elements.” Geosci. Front. 9 (6): 1649–1655. https://doi.org/10.1016/j.gsf.2017.10.007.
Liu, Y., W. Zhang, L. Zhang, Z. Zhu, J. Hu, and H. Wei. 2018b. “Probabilistic stability analyses of undrained slopes by 3D random fields and finite element methods.” Geosci. Front. 9 (6): 1657–1664. https://doi.org/10.1016/j.gsf.2017.09.003.
Lunardi, P. 1997. “Ground improvement by means of jet-grouting.” Proc. Inst. Civ. Eng. Ground Improv. 1 (2): 65–85. https://doi.org/10.1680/gi.1997.010201.
Matsuo, O. 2002. “Determination of design parameters for deep mixing.” In Proc., Tokyo Workshop 2002 on Deep Mixing, 75–79. Tokyo, Japan: Coastal Development Institute of Technology.
Mayne, P. W., and F. H. Kulhawy. 1982. “Ko–OCR relationships in soil.” J. Geotech. Eng. 108 (6): 851–872.
Mongiovì, L., P. Croce, and A. Zaninetti. 1991. “Analisi sperimentale di un intervento di consolidamento mediante gettiniezione.” In Proc., of II Convegno Nazionale dei Ricercatori del Gruppo di Coordinamento Degli Studi di Ingegneria Geotecnica del C.N.R., 101–118. [In Italian.]. Italy: GNIG (National Group of Geotechnical Engineering).
Namikawa, T., and J. Koseki. 2013. “Effects of spatial correlation on the compression behavior of a cement-treated column.” J. Geotech. Geoenviron. Eng. 139 (8): 1346–1359. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000850.
Navin, M. P., and G. M. Filz. 2005. “Statistical analysis of strength data from ground improved with DMM column.” In Vol. 1 of Proc., Int. Conf. on Deep Mixing Best Practice and Recent Advances, 145–154. Sweden: Swedish Geotechnical Institute.
Nikbakhtan, B., and M. Osanloo. 2009. “Effect of grout pressure and grout flow on soil physical and mechanical properties in jet grouting operations.” Int. J. Rock Mech. Min. Sci. 46 (3): 498–505. https://doi.org/10.1016/j.ijrmms.2008.10.005.
OPTUM G2. 2019. “OPTUM g2: Materials manual.” In edited by K. Krabbenhoft, 1–123. Copenhagen, Denmark: Optum Computational Engineering.
OPTUM G2. 2021. Geotechnical analysis software-Optum CE, Academic Version. Copenhagen, Denmark: Optum Computational Engineering.
Pan, Y., Y. Liu, A. Tyagi, F.-H. Lee, and D.-Q. Li. 2021. “Model-independent strength-reduction factor for effect of spatial variability on tunnel with improved soil surrounds.” Géotechnique 71 (5): 406–422. https://doi.org/10.1680/jgeot.19.P.056.
Pan, Y. T., H. W. Xiao, F. H. Lee, and K. K. Phoon. 2016. “Modified isotropic compression relationship for cement-admixed marine clay at low confining stress.” Geotech. Test. J. 39 (4): 695–702.
Shibazaki, M., H. Yoshida, and Y. Matsumoto. 1996. “Development of a soil improvement method utilizing cross jet.” In Grouting and deep mixing, edited by R. Yonekura, and M. Shibazaki, 707–710. Rotterdam, Netherlands: Balkema.
Shirlaw, J. N., D. Wen, P. Nadarajah, S. I. Yoon, and S. Sugawara. 2000. “Construction issues related to jet grouted slabs at the base of excavations.” In Proc., Tunnels and Underground Structures, edited by J. Zhao, J. N. Shirlaw, and R. Krishnan, 639–643. New York: CRC Press.
Tan, T. S., T. L. Goh, and K. Y. Yong. 2002. “Properties of Singapore marine clays improved by cement mixing.” Geotech. Test. J. 25 (4): 422–433.
Terashi, M. 2003. “The state of practice in deep mixing methods.” In Vol. 1 of Proc., 3rd Int. Conf. on Grouting and Ground Treatment, 25–49. Reston, VA: ASCE.
Terashi, M., and H. Tanaka. 1983. “Settlement analysis for deep mixing method.” In Vol. 2 of Proc., 8th European Conf. on Soil Mechanics and Foundation Engineering, 955–960. Rotterdam, Netherlands: A. A. Balkema.
Toraldo, C., G. Modoni, M. Ochmanski, and P. Croce. 2018. “The characteristic strength of jet-grouted material.” Géotechnique 68 (3): 262–279. https://doi.org/10.1680/jgeot.16.P.320.
Tyagi, A., Y. Liu, Y.-T. Pan, and F.-H. Lee. 2020. “Equivalent strength for tunnels in cement-admixed soil columns with spatial variability and positioning error.” J. Geotech. Geoenviron. Eng. 146 (10): 04020101. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002351.
Tyagi, A., Y. Liu, Y.-T. Pan, K. B. M. Ridhwan, and F.-H. Lee. 2018. “Stability of tunnels in cement-admixed soft soils with spatial variability.” J. Geotech. Geoenviron. Eng. 144 (12): 06018012. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001988.
Tyagi, A., H.-W. Xiao, K.-G. Chin, and F.-H. Lee. 2019. “Model for predicting the unit weight of cement-treated soils.” Soils Found. 59 (2019): 1921–1932. https://doi.org/10.1016/j.sandf.2019.09.002.
Tyagi, A., M. F. B. Zulkefli, Y. Pan, S.-H. Goh, and F.-H. Lee. 2017. “Failure modes of tunnels with improved soil surrounds.” J. Geotech. Geoenviron. Eng. 143 (11): 04017088. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001788.
Van Impe, W. F., V. Flores, P. Menge, and M. Van den Broek. 2005. “Considerations on laboratory test results of cement stabilised sludge.” In Vol. 1 of Proc., Int. Conf. on Deep Mixing Best Practice and Recent Advances, 163–168. Sweden: Swedish Geotechnical Institute.
Wen, D. 2005. “Use of jet grouting in deep excavations.” Ground Improvement–Case Histories, edited by B. Indraratna and J. Chu, 357–370. Amsterdam: Elsevier.
Xiao, H., F. H. Lee, and Y. Liu. 2017. “Bounding surface Cam-clay model with cohesion for cement-admixed clay.” Int. J. Geomech. 17 (1): 04016026. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000671.
Yang, D. S., C. J. Coutu, and L. L. Scheibel. 2004. “Quality control of cement deep soil mixing work for the Port of Oakland Projects.” In Proc., 5th Int. Conf. on Case Histories in Geotechnical Engineering, edited by S. Prakashm. Scholar's Mine, Missouri University of Science and Technology.
Yohannes, M., and J. Daramalinggam. 2019. “Specifying strength properties of soil mixing and jet grouting in Malaysia: A statistical approach.” In Vol. 8 of Proc., 1st Malaysian Geotechnical Society and Geotechnical Society of Singapore Conf. Malaysia: Malaysian Geotechnical Society.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 23 • Issue 11 • November 2023
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jul 14, 2022
Accepted: Feb 19, 2023
Published online: Aug 30, 2023
Published in print: Nov 1, 2023
Discussion open until: Jan 30, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Akanksha Tyagi, Deepak Tamta, Basal Heave Stability of Braced Excavations Considering Spatial Variability in Cement-Admixed Soil Slab, IFCEE 2024, 10.1061/9780784485415.024, (227-236), (2024).