Upper Bound Collapse Load of Strip Footing that Rests on Unsaturated Sands
Publication: International Journal of Geomechanics
Volume 23, Issue 4
Abstract
This paper attempts to investigate the bearing capacity of a strip footing that rested on unsaturated homogenous sands and used upper bound finite-element limit analysis in association with linear optimization. The analysis is based on suction stress-based (σs) effective stress (σ′) analysis. Unlike the saturated soil, the size of the yield surface varies with the vertical position, and therefore, proper modifications are carried out in the upper bound formulations to incorporate the unsaturated soil property functions. A detailed investigation is carried out to estimate the load-carrying capacity of a strip footing that vary the mechanical strength, unsaturated soil properties, water table depth (hw), and climatic conditions. The numerical solutions are presented in terms of bearing capacity factors [BCF (Nγs, Nqs)] for the unit weight (γw) and surcharge pressure (qs). The nodal velocity patterns are drawn for several cases, and the presented solutions are compared with the available results. The design charts provided in this paper might be useful to design engineers.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The corresponding author acknowledges the support of the Science and Engineering Research Board, Government of India under Grant Number SRG/2019/000149.
References
Anand, A., and R. Sarkar. 2022. “A comprehensive probabilistic investigation on bearing behavior of unsaturated fly ash deposits.” Arab. J. Geosci., 15 (4): 1–19. https://doi.org/10.1007/s12517-022-09535-z.
Beygi, M., A. Keshavarz, M. Abbaspour, R. Vali, M. Saberian, and J. Li. 2022. “Finite element limit analysis of the seismic bearing capacity of strip footing adjacent to excavation in c-φ soil.” Geomech. Geoengin. 17 (1): 246–259. https://doi.org/10.1080/17486025.2020.1728396.
Bishop, A. W. 1959. “The principle of effective stress.” Teknisk Ukeblad 106 (39): 859–863.
Chen, W. F. 1975. Limit analysis and soil plasticity. Amsterdam, Netherlands: Elsevier.
Chen, W. F., and X. L. Liu. 2012. Limit analysis in soil mechanics. Amsterdam, Netherlands: Elsevier.
Costa, Y. D., J. C. Cintra, and J. G. Zornberg. 2003. “Influence of matric suction on the results of plate load tests performed on a lateritic soil deposit.” Geotech. Test. J. 26 (2): 219–227.
Du, D., Y. Zhuang, Q. Sun, X. Yang, and D. Dias. 2021. “Bearing capacity evaluation for shallow foundations on unsaturated soils using discretization technique.” Comput. Geotech. 137: 104309. https://doi.org/10.1016/j.compgeo.2021.104309.
Fredlund, D. G. 1996. “The emergence of unsaturated soil mechanics.” In Proc., 4th Spencer J Buchanan Lecture, 1–39. College Station, TX: A & M University Press.
Gardner, W. R. 1958. “Some steady-state solutions of the unsaturated moisture flow equation with application to evaporation from a water table.” Soil Sci. 85 (4): 228–232. https://doi.org/10.1097/00010694-195804000-00006.
Ghosh, P. 2008. “Upper bound solutions of bearing capacity of strip footing by pseudo-dynamic approach.” Acta Geotech. 3: 115–123. https://doi.org/10.1007/s11440-008-0058-z.
Ismael, N. F. 1985. “Allowable pressure from loading tests on Kuwaiti soils.” Can. Geotech. J. 22: 151–157. https://doi.org/10.1139/t85-021.
Kumar, J., and K. M. Kouzer. 2007. “Effect of footing roughness on bearing capacity factor Nγ.” J. Geotech. Geoenviron. Eng. 133 (5): 502–511. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:5(502).
Lu, N., J. W. Godt, and D. T. Wu. 2010. “A closed-form equation for effective stress in unsaturated soil.” Water Resour. Res. 46 (5): W05515.
Lu, N., and W. J. Likos. 2004. Unsaturated soil mechanics. New York: Wiley.
Meyerhof, G. G. 1951. “The ultimate bearing capacity of foundations.” Géotechnique 2 (4): 301–332. https://doi.org/10.1680/geot.1951.2.4.301.
Mohamed, F. O., and S. K. Vanapalli. 2006. “Laboratory investigations for the measurement of the bearing capacity of an unsaturated coarse-grained soil.” In Proc., 59th Canadian Geotechnical Conf., 1–4. Richmond, BC: Canadian Geotechnical Society.
Mohamed, F. M. O., and S. K. Vanapalli. 2012. “Estimation of bearing capacity of saturated and unsaturated sands from the SPT and CPT correlations.” In Proc., World Congress on Advances in Civil, Environmental, and Materials Research. Daejeon, South Korea: Korea Advanced Institute of Science & Technology (KAIST).
Oh, W. T., and S. K. Vanapalli. 2008. “Modeling the stress versus settlement behavior of model footings in saturated and unsaturated sandy soils.” In Proc., 12th Int. Conf., of Int. Association for Computer Methods and Advances in Geomechanics, 1–6. International Assn for Computer Methods & Advances in Geomechanics (IACMAG).
Oh, W. T., and S. K. Vanapalli. 2011. “Modelling the applied vertical stress and settlement relationship of shallow foundations in saturated and unsaturated sands.” Can. Geotech. J. 48 (3): 425–438. https://doi.org/10.1139/T10-079.
Oloo, S. Y. 1994. “A bearing capacity approach to the design of low volume traffic roads.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Saskatchewan.
Patil, U. D., L. R. Hoyos, and A. J. Puppala. 2020. “Suction stress characteristic curves of cohesive-frictional soils from multiple suction-controlled testing methods.” Int. J. Geomech. 20 (7): 04020077. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001698.
Prandtl, L. 1921. “Hauptaufsätze: Über die eindringungsfestigkeit (härte) plastischer baustoffe und die festigkeit von schneiden.” [In German.] Z. Angew. Math. Mech. 1 (1): 15–20. https://doi.org/10.1002/zamm.19210010102.
Rankine, W. J. M. 1885. “On the stability of loose earth.” In Vol. 147 of Philosophical Transactions. London: Royal Society.
Rojas, J. C., L. M. Salinas, and C. Sejas. 2007. “Plate-load tests on an unsaturated lean clay.” In Experimental unsaturated soil mechanics, edited by T. Schanz, 445–452. Berlin: Springer.
Skempton, A. W. 1951. The bearing capacity of clays. London: Building Research Congress, Div. I.
Sloan, S. W. 1988. “Lower bound limit analysis using finite elements and linear programming.” Int. J. Numer. Anal. Methods Geomech. 12: 61–77. https://doi.org/10.1002/nag.1610120105.
Sloan, S. W. 1989. “Upper bound limit analysis using finite elements and linear programming.” Int. J. Numer. Anal. Methods Geomech. 13: 263–282. https://doi.org/10.1002/nag.1610130304.
Sloan, S. W., and P. W. Kleeman. 1995. “Upper bound limit analysis using discontinuous velocity fields.” Comput. Methods Appl. Mech. Eng. 127: 293–314. https://doi.org/10.1016/0045-7825(95)00868-1.
Steensen-Bach, J. O., N. Foged, and J. S. Steenfelt. 1987. “Capillary induced stresses—Fact or fiction?” In Proc., 9th European Conf., on Soil Mechanics and Foundation Engineering, Groundwater Effects in Geotechnical Engineering, 83–89. Rotterdam, The Netherlands: A.A. Balkema.
Tang, C., K. K. Phoon, and K. C. Toh. 2015. “Effect of footing width on Nγ and failure envelope of eccentrically and obliquely loaded strip footings on sand.” Can. Geotech. J. 52 (6): 694–707.
Tang, Y., H. A. Taiebat, and A. R. Russell. 2017. “Bearing capacity of shallow foundations in unsaturated soil considering hydraulic hysteresis and three drainage conditions.” Int. J. Geomech. 17 (4): 04016142. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000845.
Terzaghi, K. 1943. Theoretical soil mechanics. New York: Wiley.
Thanh, V. O., and A. R. Russell. 2016. “Bearing capacity of strip footings on unsaturated soils by the slip line theory.” Comput. Geotech. 74: 122–131. https://doi.org/10.1016/j.compgeo.2015.12.016.
Vahedifard, F., and J. D. Robinson. 2016. “Unified method for estimating the ultimate bearing capacity of shallow foundations in variably saturated soils under steady flow.” J. Geotech. Geoenviron. Eng. 142 (4): 04015095. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001445.
Vanapalli, S. K., and F. M. O. Mohamed. 2013. “Bearing capacity and settlement of footings in an unsaturated sand.” Int. J. Geomate 5 (1): 595–604.
Vanapalli, S. K., and W. T. Oh. 2010. “Mechanics of unsaturated soils for the design of foundation structures.” In Proc., 3rd WSEAS Int. Conf. on Engineering Mechanics, Structures, Engineering Geology, 363–377. Athens, Greece: World Scientific and Engineering Academy and Society (WSEAS).
van Genuchten, M. T. 1980. “A closed-form equation for predicting the hydraulic conductivity of unsaturated soils.” Soil Sci. Soc. Am. J. 44 (5): 892–898. https://doi.org/10.2136/sssaj1980.03615995004400050002x.
Vesic, A. S. 1973. “Analysis of ultimate loads of shallow foundations.” J. Soil Mech. Found. Div. 99 (SM1): 45–73. https://doi.org/10.1061/JSFEAQ.0001846.
Wu, G., R. Zhang, M. Zhao, and S. Zhou. 2020. “Undrained stability analysis of eccentrically loaded strip footing lying on layered slope by finite element limit analysis.” Comput. Geotech. 123: 103600. https://doi.org/10.1016/j.compgeo.2020.103600.
Yan, Q., J. Zhao, C. Zhang, and J. Wang. 2020. “Ultimate bearing capacity of strip foundations in unsaturated soils considering the intermediate principal stress effect.” Adv. Civ. Eng. 2020: 8854552.
Yuan, S., and J. Du. 2020. “A lower-bound formulation for unsaturated soils.” Géotechnique 70 (2): 123–137. https://doi.org/10.1680/jgeot.18.P.103.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 23 • Issue 4 • April 2023
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jul 2, 2022
Accepted: Oct 3, 2022
Published online: Jan 24, 2023
Published in print: Apr 1, 2023
Discussion open until: Jun 24, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.