Technical Notes
Mar 7, 2023

Stress-Dependent Shear Strength of Resedimented Nile Silty Clay

Publication: International Journal of Geomechanics
Volume 23, Issue 5

Abstract

The variation of clay undrained shear strength with consolidation stresses is of paramount importance to geotechnical engineers. For several decades, the normalized shear strength of clays has been the cornerstone of geotechnical design in many applications, such as staged construction of embankments. Recently, different trends of shear strength dependency on consolidation stresses have emerged indicating nonlinear variation. Resedimentation has been a useful and reliable method to investigate stress dependency by generating lab test specimens of fine-grained soils with a minimum sample to sample variation for benchmark studies. Previous work on resedimented Nile silty clay (RNSC) has shown unique features, such as high sand fraction and contradicting index properties used for soil classification. The shear strength of Nile silty clay (NSC) and the effects of the consolidation stresses are explored through a laboratory program on resedimented samples from material excavated within the Nile River flood plains. A portion of the material was processed using mechanical energy, which exhibited a significant increase in the liquid limit and a larger clay-sized fraction of particles from grain-size distribution tests. The measured engineering parameters are compared with comparable studied soils and established empirical correlations to provide insights on mechanical behaviors of the NSC. NSC is found to have a rapid decrease in the undrained shear strength ratio and a rapid increase in the lateral stress ratio with increasing consolidation stress.

Get full access to this article

View all available purchase options and get full access to this article.

Acknowledgments

UT GeoFluids – Partly funded through the UT GeoFluids Consortium. This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors.

References

Abdulhadi, N. O. 2009. “An experimental investigation into the stress-dependent mechanical behavior of cohesive soil with application to wellbore instability.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Massachusetts Institute of Technology.
Abdulhadi, N. O., J. T. Germaine, and A. J. Whittle. 2011. “Experimental study of wellbore instability in clays.” J. Geotech. Geoenviron. Eng. 137 (8): 766–776. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000495.
Abdulhadi, N. O., J. T. Germaine, and A. J. Whittle. 2012. “Stress-dependent behavior of saturated clay.” Can. Geotech. J. 49 (8): 907–916. https://doi.org/10.1139/t2012-057.
Akl, S. A., and L. Louis. 2013. “Using asymmetric yield surfaces to model material anisotropy.” In Proc., 47th US Rock Mechanics/Geomechanics Symp. Alexandria, VA: American Rock Mechanics Association.
Akl, S. A. Y., H. I. Mohaisen, and M. A. El-Khouly. 2020. “Undrained shear behavior of resedimented Nile silty clay.” In Proc., 54th US Rock Mechanics/Geomechanics Symp. Richardson, TX: OnePetro.
Akl, S. A., K. M. Salaheldin, and H. A. Lotfi. 2019. “Investigating the yield anisotropy of resedimented Nile Silty Clay.” In Geo-Congress 2019: Engineering Geology, Site Characterization, and Geophysics, Geotechnical Special Publication 311, edited by C. L. Meehan, S. Kumar, M. A. Pando, and J. T. Coe, 280–288. Reston, VA: ASCE.
Akl, S. A., and A. J. Whittle. 2016. “Stability analyses for deviated wellbores in unconsolidated cross-anisotropic formations.” Can. Geotech. J. 53 (9): 1450–1459. https://doi.org/10.1139/cgj-2015-0456.
Akl, S. A., and A. J. Whittle. 2017. “Validation of soil models for wellbore stability in ductile formations using laboratory TWC tests.” J. Geotech. Geoenviron. Eng. 143 (2): 04016095. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001588.
ASTM. 2017. Standard test method for particle-size distribution (gradation) of fine-grained soils using the sedimentation (hydrometer) analysis. ASTM D7928-17. West Conshohocken, PA: ASTM.
Casey, B. 2014. “The consolidation and strength behavior of mechanically compressed fine-grained sediments.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Massachusetts Institute of Technology.
Casey, B., and J. T. Germaine. 2013. “Stress dependence of shear strength in fine-grained soils and correlations with liquid limit.” J. Geotech. Geoenviron. Eng. 139 (10): 1709–1717. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000896.
Casey, B., J. Germaine, P. Flemings, J. Reece, B. Gao, and W. Betts. 2013. “Liquid limit as a predictor of mudrock permeability.” Mar. Pet. Geol. 44: 256–263. https://doi.org/10.1016/j.marpetgeo.2013.04.008.
Galaa, A. M., S. A. Y. Akl, and M. Al-Mahallawy. 2017. “Compression characteristics of resedimented Nile Silty Clay.” In Proc., 51st US Rock Mechanics/Geomechanics Symp. Alexandria, VA: American Rock Mechanics Association.
Gens, A. 1982. “Stress-strain and strength characteristics of a low plasticity clay.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Faculty of Engineering, Imperial College, London.
Hanley, A. 2017. “The characterization of the yield surface for fine-grained sediments.” M.S. thesis, Dept. of Civil and Environmental Engineering, Tufts Univ.
Hanna, F. S., and H. Beckmann. 1975. “Clay minerals of some soils of the Nile Valley in Egypt.” Geoderma 14: 159–170. https://doi.org/10.1016/0016-7061(75)90074-9.
Kumar, G. V., and D. M. Wood. 1999. “Fall cone and compression tests on clay and gravel mixtures.” Geotechnique 49 (6): 727–739.
Ladd, C. C., and R. Foott. 1974. “New design procedure for stability of soft clays.” J. Geotech. Eng. Div. 100 (7): 763–786. https://doi.org/10.1061/AJGEB6.0000066.
Ladd, C., G. Young, S. Kraemer, and D. Burke. 1999. “Engineering properties of Boston Blue Clay from special testing program.” In Proc., Special Geotechnical Testing: Central Artery/Tunnel Project, Geotechnical Special Publication 91, 1–24. Reston, VA: ASCE.
Lü, X., D. Xue, B. Zhang, and Q. Zhong. 2022. “Experimental studies and constitutive modeling of static liquefaction instability in sand–clay mixtures.” Int. J. Geomech. 22 (9): 04022149. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002472.
Mitchell, J. K., and K. Soga. 2005. Fundamentals of soil behavior. New York: John Wiley & Sons.
Sheahan, T., and J. Germaine. 1992. “Computer automation of conventional triaxial equipment.” Geotech. Test. J. 15 (4): 311–322. https://doi.org/10.1520/GTJ10245J.
Stump, B. B. 1998. “Illuminating basinal fluid flow in Eugene Island 330 (Gulf of Mexico) through in situ observations, deformation experiments and hydrodynamic modeling.” M.S. thesis, Dept. of Civil and Environmental Engineering, Penn State Univ.
Wang, D., N. E. Abriak, and R. Zentar. 2017. “Stress-dependent behavior of artificially structured and reconstituted marine soils.” Int. J. Geomech. 17 (4): 04016103. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000804.
Whittle, A. J., H. M. El-Naggar, S. A. Akl, and A. M. Galaa. 2022. “Stability analysis of upstream tailings dam using numerical limit analyses.” J. Geotech. Geoenviron. Eng. 148 (6): 04022035. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002792.
Whittle, A. J., and T. Sutabutr. 1999. “Prediction of pile setup in clay.” Transp. Res. Rec. 1663 (1): 33–40. https://doi.org/10.3141/1663-05.
Xu, D. S., M. Huang, and Y. Zhou. 2020. “One-dimensional compression behavior of calcareous sand and marine clay mixtures.” Int. J. Geomech. 20 (9): 04020137. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001763.
Zablocki, M., J. Germaine, R. Plumb, and P. Flemings. 2022. “The impact of clay fraction on the strength and stress ratio (K0) in Gulf of Mexico mudrocks and quartz silt mixtures: Implications for borehole stability and fracture gradient.” Pet. Geosci. 28: petgeo2021-056. https://doi.org/10.1144/petgeo2021-056.
Zhang, G. 2002. “Laboratory characterization of a highly weathered old alluvium in San Juan, Puerto Rico.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Massachusetts Institute of Technology.

Information & Authors

Information

Published In

Go to International Journal of Geomechanics
International Journal of Geomechanics
Volume 23Issue 5May 2023

History

Received: Feb 13, 2022
Accepted: Nov 30, 2022
Published online: Mar 7, 2023
Published in print: May 1, 2023
Discussion open until: Aug 7, 2023

Permissions

Request permissions for this article.

ASCE Technical Topics:

Authors

Affiliations

Mark Zablocki
Graduate Student, Advanced Geomaterials Laboratory, Tufts Univ., Medford, MA.
Professor, Soil Mechanics and Foundations Research Laboratory, Cairo Univ., Giza, Egypt (corresponding author). ORCID: https://orcid.org/0000-0003-0636-3155. Email: [email protected]
John T. Germaine, M.ASCE
Research Professor, Advanced Geomaterials Laboratory, Tufts Univ., Medford, MA.
Associate Professor, Geotechnical Engineering, Housing and Building Research Center, Giza, Egypt. ORCID: https://orcid.org/0000-0002-0661-6426.

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Article
$35.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share