DEM Investigation into the Effects of Liquefaction History–Induced Anisotropy on Sand Behaviors
Publication: International Journal of Geomechanics
Volume 23, Issue 3
Abstract
Many studies have verified that liquefaction histories would change sand mesostructures. However, how much the liquefaction history–induced anisotropy affects sand mechanical properties under different loading conditions remains unknown. In this study, the triaxial behaviors and coefficients of lateral earth pressure (K0) of sand specimens with different liquefaction histories were simulated by a discrete element method (DEM). The triaxial tests included monotonic drained and undrained tests and cyclic undrained tests. The K0 tests included two cases: the K0VH test was conducted using one-dimensional compression in the vertical direction, while the K0HV test was conducted using one-dimensional compression in the horizontal direction. Simulation results showed that the anisotropy induced by the liquefaction history obviously affected the initial stiffness and contraction behavior of reconsolidated sand during monotonic drained and undrained tests. Once the anisotropy degree exceeded a threshold, all the reconsolidated sand was reliquefied after only one cycle, regardless of the void ratio and applied cyclic stress ratio. The K0 test of the reconsolidated sand had a good correlation with the anisotropy degree. Reconsolidated sand with a larger anisotropy degree exhibited a more remarkable discrepancy between K0VH and K0HV. These anisotropic behaviors were intrinsically the responses of the interparticle normal contact force chains to the boundary conditions of a certain test.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and codes generated or used during the study appear in the published article.
Acknowledgments
This study was financed by the National Natural Science Foundation of China (No. 41977225), the Fundamental Research Funds for the Central Universities, and the China Scholarship Council. All support is greatly appreciated.
References
Amini, P. F., D. Huang, and G. Wang. 2021a. “Dynamic properties of Toyoura sand in reliquefaction tests.” Géotech. Lett. 11 (4): 239–246. https://doi.org/10.1680/jgele.20.00099.
Amini, P. F., D. Huang, G. Wang, and F. Jin. 2021b. “Effects of strain history and induced anisotropy on reliquefaction resistance of Toyoura sand.” J. Geotech. Geoenviron. Eng. 147 (9): 04021094. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002588.
Barnett, N., M. M. Rahman, M. R. Karim, and H. B. K. Nguyen. 2020. “Evaluating the particle rolling effect on the characteristic features of granular material under the critical state soil mechanics framework.” Granular Matter 22 (4): 89. https://doi.org/10.1007/s10035-020-01055-5.
da Cruz, F., S. Emam, M. Prochnow, J.-N. Roux, and F. Chevoir. 2005. “Rheophysics of dense granular materials: Discrete simulation of plane shear flows.” Phys. Rev. E 72 (2): 021309. https://doi.org/10.1103/PhysRevE.72.021309.
Ecemis, N., H. E. Demirci, and M. Karaman. 2015. “Influence of consolidation properties on the cyclic re-liquefaction potential of sands.” Bull. Earthquake Eng. 13 (6): 1655–1673. https://doi.org/10.1007/s10518-014-9677-y.
El-Sekelly, W., T. Abdoun, and R. Dobry. 2017. “Effect of sand overconsolidation and extensive liquefaction on K0.” Geotech. Front. 2017: 478–486.
Finn, W. D. L., P. L. Bransby, and D. J. Pickering. 1970. “Effect of strain history on liquefaction of sand.” J. Soil Mech. Found. Div. 96 (6): 1917–1934. https://doi.org/10.1061/JSFEAQ.0001478.
Goldenberg, C., and I. Goldhirsch. 2005. “Friction enhances elasticity in granular solids.” Nature 435 (7039): 188–191. https://doi.org/10.1038/nature03497.
Gong, J., Z. Nie, Y. Zhu, Z. Liang, and X. Wang. 2019. “Exploring the effects of particle shape and content of fines on the shear behavior of sand-fines mixtures via the DEM.” Comput. Geotech. 106: 161–176. https://doi.org/10.1016/j.compgeo.2018.10.021.
Gu, X., J. Hu, and M. Huang. 2015. “K0 of granular soils: A particulate approach.” Granular Matter 17 (6): 703–715. https://doi.org/10.1007/s10035-015-0588-7.
Gu, X., J. Hu, M. Huang, and J. Yang. 2018. “Discrete element analysis of the K0 of granular soil and its relation to small strain shear stiffness.” Int. J. Geomech. 18 (3): 06018003. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001102.
Gu, X., J. Zhang, and X. Huang. 2020. “DEM analysis of monotonic and cyclic behaviors of sand based on critical state soil mechanics framework.” Comput. Geotech. 128: 103787. https://doi.org/10.1016/j.compgeo.2020.103787.
Guo, N., and J. Zhao. 2013. “The signature of shear-induced anisotropy in granular media.” Comput. Geotech. 47: 1–15. https://doi.org/10.1016/j.compgeo.2012.07.002.
Ha, I.-S., S. M. Olson, M.-W. Seo, and M.-M. Kim. 2011. “Evaluation of reliquefaction resistance using shaking table tests.” Soil Dyn. Earthquake Eng. 31 (4): 682–691. https://doi.org/10.1016/j.soildyn.2010.12.008.
He, M., J. Li, D. Liu, K. Ling, and F. Ren. 2021. “A novel true triaxial apparatus for simulating strain bursts under high stress.” Rock Mech. Rock Eng. 54 (2): 759–775. https://doi.org/10.1007/s00603-020-02285-y.
Hu, Q., J.-M. Zhang, and R. Wang. 2020. “Quantification of dilatancy during undrained cyclic loading and liquefaction.” Comput. Geotech. 128: 103853. https://doi.org/10.1016/j.compgeo.2020.103853.
Huang, X., K. J. Hanley, Z. Zhang, and C.-y. Kwok. 2019. “Structural degradation of sands during cyclic liquefaction: Insight from DEM simulations.” Comput. Geotech. 114: 103139. https://doi.org/10.1016/j.compgeo.2019.103139.
Huang, X., C. O’Sullivan, K. Hanley, and C. Y. Kwok. 2014. “Discrete-element method analysis of the state parameter.” Géotechnique 64 (12): 954–965. https://doi.org/10.1680/geot.14.P.013.
Ishihara, K. 1996. Soil behaviour in earthquake geotechnics. New York: Oxford University Press.
Ishihara, K., and S. Okada. 1982. “Effects of large preshearing on cyclic behavior of sand.” Soils Found. 22 (3): 109–125. https://doi.org/10.3208/sandf1972.22.3_109.
Itasca. 2015. User’s manual for PFC3D. Minneapolis: Itasca.
Jiang, M. J., H.-S. Yu, and D. Harris. 2005. “A novel discrete model for granular material incorporating rolling resistance.” Comput. Geotech. 32 (5): 340–357. https://doi.org/10.1016/j.compgeo.2005.05.001.
Jiang, M., A. Zhang, and C. Fu. 2018. “3-D DEM simulations of drained triaxial tests on inherently anisotropic granulates.” Eur. J. Environ. Civ. Eng. 22 (Supp. 1): s37–s56. https://doi.org/10.1080/19648189.2017.1385541.
Koseki, J., D. Yokoyama, and T. Morimoto. 2020. “Cyclic bi-axial tests on assembly of metal rods under constant-volume condition to study re-liquefaction behavior.” Transp. Infrastruct. Geotechnol. 7 (3): 478–495. https://doi.org/10.1007/s40515-020-00123-w.
Kuhn, M. R., H. E. Renken, A. D. Mixsell, and S. L. Kramer. 2014. “Investigation of cyclic liquefaction with discrete element simulations.” J. Geotech. Geoenviron. Eng. 140 (12): 04014075. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001181.
Liu, S., Z. Nie, W. Hu, J. Gong, and P. Lei. 2021. “Effect of particle type on the shear behaviour of granular materials.” Particuology 56: 124–131. https://doi.org/10.1016/j.partic.2020.11.001.
Morimoto, T., Y. Aoyagi, and J. Koseki. 2019. “Effects of small and large shear histories on multiple liquefaction properties of sand with initial static shear.” Soils Found. 59 (6): 2024–2035. https://doi.org/10.1016/j.sandf.2019.11.001.
Morimoto, T., M. Otsubo, and J. Koseki. 2021. “Microscopic investigation into liquefaction resistance of pre-sheared sand: Effects of particle shape and initial anisotropy.” Soils Found. 61 (2): 335–351. https://doi.org/10.1016/j.sandf.2020.12.008.
Nguyen, H. B. K., M. M. Rahman, and A. Fourie. 2021a. “The critical state behaviour of granular material in triaxial and direct simple shear condition: A DEM approach.” Comput. Geotech. 138: 104325. https://doi.org/10.1016/j.compgeo.2021.104325.
Nguyen, H. B. K., M. M. Rahman, and A. B. Fourie. 2017. “Undrained behaviour of granular material and the role of fabric in isotropic and K0 consolidations: DEM approach.” Géotechnique 67 (2): 153–167. https://doi.org/10.1680/jgeot.15.P.234.
Nguyen, H. B. K., M. M. Rahman, and A. B. Fourie. 2020. “Effect of particle shape on constitutive relation: DEM study.” J. Geotech. Geoenviron. Eng. 146 (7): 04020058. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002278.
Nguyen, H. B. K., M. M. Rahman, and A. B. Fourie. 2021b. “How particle shape affects the critical state, triggering of instability and dilatancy of granular materials—Results from a DEM study.” Géotechnique 71 (9): 749–764. https://doi.org/10.1680/jgeot.18.P.211.
Northcutt, S., and D. Wijewickreme. 2013. “Effect of particle fabric on the coefficient of lateral earth pressure observed during one-dimensional compression of sand.” Can. Geotech. J. 50 (5): 457–466. https://doi.org/10.1139/cgj-2012-0162.
Oda, M., K. Kawamoto, K. Suzuki, H. Fujimori, and M. Sato. 2001. “Microstructural interpretation on reliquefaction of saturated granular soils under cyclic loading.” J. Geotech. Geoenviron. Eng. 127 (5): 416–423. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:5(416).
Okamura, M., F. Nelson, and S. Watanabe. 2019. “Pre-shaking effects on volumetric strain and cyclic strength of sand and comparison to unsaturated soils.” Soil Dyn. Earthquake Eng. 124: 307–316. https://doi.org/10.1016/j.soildyn.2018.04.046.
Padmanabhana, G., and G. K. Shanmugamb. 2022. “Reliquefaction assessment studies on saturated sand deposits under repeated acceleration loading using 1-g shaking table experiments.” J. Earthquake Eng. 26 (6): 2888–2910. https://doi.org/10.1080/13632469.2020.1778588.
Pang, Y., C. Gu, J. Wang, and Y. Cai. 2020. “Strain evolution of saturated clays under cyclic loadings in three-dimensional stress condition.” Eng. Geol. 278 (5): 105824. https://doi.org/10.1016/j.enggeo.2020.105824.
Phan, Q. T., H. H. Bui, G. D. Nguyen, and A. Bouazza. 2021. “Effect of particle rolling resistance on drained and undrained behaviour of silty sand.” Acta Geotech. 16 (8): 2657–2682. https://doi.org/10.1007/s11440-020-01128-y.
Quigley, M. C., S. Bastin, and B. A. Bradley. 2013. “Recurrent liquefaction in Christchurch, New Zealand, during the Canterbury earthquake sequence.” Geology 41 (4): 419–422. https://doi.org/10.1130/G33944.1.
Rahman, M. M., H. B. K. Nguyen, A. B. Fourie, and M. R. Kuhn. 2021. “Critical state soil mechanics for cyclic liquefaction and postliquefaction behavior: Dem study.” J. Geotech. Geoenviron. Eng. 147 (2): 04020166. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002453.
Rowe, P. W., and G. I. Taylor. 1962. “The stress-dilatancy relation for static equilibrium of an assembly of particles in contact.” Proc. R. Soc. London Ser. A Math. Phys. Sci. 269 (1339): 500–527.
Shafipour, R., and A. Soroush. 2008. “Fluid coupled-DEM modelling of undrained behavior of granular media.” Comput. Geotech. 35 (5): 673–685. https://doi.org/10.1016/j.compgeo.2007.12.003.
Sitharam, T. G., J. S. Vinod, and B. V. Ravishankar. 2008. “Evaluation of undrained response from drained triaxial shear tests: DEM simulations and experiments.” Géotechnique 58 (7): 605–608. https://doi.org/10.1680/geot.2008.58.7.605.
Song, F., J. Zhang, and C. Liu. 2010. “Experimental study of K0 of anisotropic sand.” [In Chinese.] Rock Soil Mech. 31 (12): 3727–3732+3740.
Suzuki, T., and T. Suzuki. 1988. “Effects of density and fabric change on reliquefaction resistance of saturated sand.” Soils Found. 28 (2): 187–195. https://doi.org/10.3208/sandf1972.28.2_187.
Thornton, C. 2000. “Numerical simulations of deviatoric shear deformation of granular media.” Géotechnique 50 (1): 43–53. https://doi.org/10.1680/geot.2000.50.1.43.
Toyota, H., and S. Takada. 2017. “Variation of liquefaction strength induced by monotonic and cyclic loading histories.” J. Geotech. Geoenviron. Eng. 143 (4): 04016120. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001634.
Wahyudi, S., J. Koseki, T. Sato, and G. Chiaro. 2016. “Multiple-liquefaction behavior of sand in cyclic simple stacked-ring shear tests.” Int. J. Geomech. 16 (5): C4015001. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000596.
Wakamatsu, K. 2012. “Recurrent liquefaction induced by the 2011 great east Japan earthquake compared with the 1987 earthquake.” In Proc., Int. Symp. on Engineering Lessons Learned from the 2011 Great East Japan Earthquake, 675–686. Tokyo: Japan Association for Earthquake Engineering.
Wang, G., and J. Wei. 2016. “Microstructure evolution of granular soils in cyclic mobility and post-liquefaction process.” Granular Matter 18 (3): 51. https://doi.org/10.1007/s10035-016-0621-5.
Wang, R., P. Fu, J.-M. Zhang, and Y. F. Dafalias. 2019. “Fabric characteristics and processes influencing the liquefaction and re-liquefaction of sand.” Soil Dyn. Earthquake Eng. 125: 105720. https://doi.org/10.1016/j.soildyn.2019.105720.
Yamada, S., T. Noda, M. Nakano, and A. Asaoka. 2022. “Combined-loading elastoplastic constitutive model for a unified description of the mechanical behavior of the soil skeleton.” Comput. Geotech. 141: 104521. https://doi.org/10.1016/j.compgeo.2021.104521.
Yamada, S., T. Takamori, and K. Sato. 2010. “Effects on reliquefaction resistance produced by changes in anisotropy during liquefaction.” Soils Found. 50 (1): 9–25. https://doi.org/10.3208/sandf.50.9.
Yang, Z. X., J. Yang, and L. Z. Wang. 2013. “Micro-scale modeling of anisotropy effects on undrained behavior of granular soils.” Granular Matter 15 (5): 557–572. https://doi.org/10.1007/s10035-013-0429-5.
Ye, B., H. Hu, X. Bao, and P. Lu. 2018. “Reliquefaction behavior of sand and its mesoscopic mechanism.” Soil Dyn. Earthquake Eng. 114: 12–21. https://doi.org/10.1016/j.soildyn.2018.06.024.
Ye, B., J. Lu, and G. Ye. 2015. “Pre-shear effect on liquefaction resistance of a Fujian sand.” Soil Dyn. Earthquake Eng. 77: 15–23. https://doi.org/10.1016/j.soildyn.2015.04.018.
Ye, B., X. Xie, T. Zhao, S. Song, Z. Ma, X. Feng, J. Zou, and H. Wang. 2022. “Centrifuge tests of macroscopic and mesoscopic investigation into effects of seismic histories on sand liquefaction resistance.” J. Earthquake Eng. 26 (8): 4302–4324. https://doi.org/10.1080/13632469.2020.1826373.
Ye, B., G. Ye, and F. Zhang. 2012. “Numerical modeling of changes in anisotropy during liquefaction using a generalized constitutive model.” Comput. Geotech. 42: 62–72. https://doi.org/10.1016/j.compgeo.2011.12.009.
Yimsiri, S., and K. Soga. 2010. “DEM analysis of soil fabric effects on behaviour of sand.” Géotechnique 60 (6): 483–495. https://doi.org/10.1680/geot.2010.60.6.483.
Zhang, A., M. Jiang, and C. Thornton. 2020. “A coupled CFD-DEM method with moving mesh for simulating undrained triaxial tests on granular soils.” Granular Matter 22 (1): 13. https://doi.org/10.1007/s10035-019-0984-5.
Zhang, W., and L. Rothenburg. 2020. “Comparison of undrained behaviors of granular media using fluid-coupled discrete element method and constant volume method.” J. Rock Mech. Geotech. Eng. 12 (6): 1272–1289. https://doi.org/10.1016/j.jrmge.2020.03.009.
Zhou, W., J. Liu, G. Ma, and X. Chang. 2017. “Three-dimensional DEM investigation of critical state and dilatancy behaviors of granular materials.” Acta Geotech. 12 (3): 527–540. https://doi.org/10.1007/s11440-017-0530-8.
Zhu, M., G. Gong, J. Xia, L. Liu, and S. Wilkinson. 2021. “Effects of deviator strain histories on liquefaction of loose sand using DEM.” Comput. Geotech. 136: 104213. https://doi.org/10.1016/j.compgeo.2021.104213.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 23 • Issue 3 • March 2023
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Nov 22, 2021
Accepted: Oct 6, 2022
Published online: Dec 26, 2022
Published in print: Mar 1, 2023
Discussion open until: May 26, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Farzad Kaviani-Hamedani, Kazem Fakharian, Danial Shirkavand, Arman Khoshghalb, Farid Shabani, Ali Sooraki, Amirhossein Rezaie, Exploring the Effects of Initial Fabric Anisotropy due to Preshearing Stress History in Different Directions on the Undrained Behavior of Loose Sands, International Journal of Geomechanics, 10.1061/IJGNAI.GMENG-9574, 24, 9, (2024).