Time-Variant System Reliability Analysis of Concrete Sewer Pipes under Corrosion Considering Multiple Failure Modes
Publication: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
Volume 9, Issue 1
Abstract
This paper presents a framework for time-variant system reliability analysis of concrete sewer pipes considering multiple modes of failure. Sewer pipelines are among critical infrastructure systems, designed to collect and transport wastewater away from communities. Such pipes are typically subjected to corrosion and subsequent damage because of continuous contact with corrosive materials. Corrosion is here modeled in terms of the reduction in the pipe wall thickness. In the proposed framework, prevailing uncertainties in the characteristics of wastewater fluid, geometric properties of fluid cross section, and corrosion-related parameters of concrete are quantified as random variables. Next, various modes of failure under bending, shear, excessive cracking, and cover loss are formulated as multiple limit-state functions. This leads to a general system reliability problem defined as a series system of parallel subsystems, i.e., cut sets. Further, by introducing the corrosion model into the limit-state functions, a time-variant system reliability problem is established in which the integration domain is conditioned to the corrosion level at each point in time. By integrating over the conditional probabilities through a rejection sampling method, the failure probability is computed given the corrosion level over the desired time span. The results show that the failure probability increases sharply with time and corrosion level. For instance, the failure probability exceeds 80% for pipes over 50 years and at corrosion levels of over 40%. Moreover, the sensitivity analysis shows that the acid-consumption capacity of the pipe material, the pH-related factor, and the proportion of dissolved highly influence the failure probability. The maximum effects of these parameters occur within 0%–10% corrosion. The results of this study can be used to evaluate the failure probability of sewer pipes given their age and current corrosion level.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code that support the findings of this study are available from the authors upon reasonable request.
Acknowledgments
The first author gratefully acknowledges Iran’s National Elites Foundation for a postdoctoral fellowship No. 7000/10139 at Sharif University of Technology. The second author also appreciatively thanks Sharif University of Technology for Grant No. QA990102. The third author appreciates the National Natural Science Foundation of China for Grant No. 51908324. The fourth author also thanks the Science and Technology Commission of Shanghai Municipality for Grant No. 18DZ1205902.
References
Abraham, D. M., and S. Ali Gillani. 1999. “Innovations in materials for sewer system rehabilitation.” Tunnelling Underground Space Technol. 14 (Jan): 43–56. https://doi.org/10.1016/S0886-7798(99)00003-6.
Abyani, M., and M. R. Bahaari. 2020. “A comparative reliability study of corroded pipelines based on Monte Carlo simulation and Latin hypercube sampling methods.” Int. J. Press. Vessels Pip. 181 (Mar): 104079. https://doi.org/10.1016/j.ijpvp.2020.104079.
ASCE. 2001. Standard practice for direct design of buried precast concrete pipe using standard installations (SIDD). ASCE 15-98. Reston, VA: ASCE.
ASCE. 2009. Report card for America’s infrastructure. Reston, VA: ASCE.
AWWA (American Water Works Association). 1977. ANSI/AWWA standard for thickness design of cast-iron pipe. AWWA C101-67 (R1977). Denver: AWWA.
Bachmaier, M., and M. Backes. 2011. “Variogram or semivariogram? Variance or semivariance? Allan variance or introducing a new term?” Math. Geosci. 43 (6): 735–740. https://doi.org/10.1007/s11004-011-9348-3.
Bao, Y., D. Feng, N. Ma, H. Zhu, and T. Rabczuk. 2018. “Experimental and numerical study on structural performance of reinforced concrete box sewer with localized extreme defect.” Underground Space 3 (2): 166–179. https://doi.org/10.1016/j.undsp.2018.04.001.
Berahman, F., and F. Behnamfar. 2009. “Probabilistic seismic demand model and fragility estimates for critical failure modes of un-anchored steel storage tanks in petroleum complexes.” Probab. Eng. Mech. 24 (4): 527–536. https://doi.org/10.1016/j.probengmech.2009.03.005.
Bhunia, G. S., P. K. Shit, and R. Chattopadhyay. 2018. “Assessment of spatial variability of soil properties using geostatistical approach of lateritic soil (West Bengal, India).” Ann. Agrar. Sci. 16 (4): 436–443. https://doi.org/10.1016/j.aasci.2018.06.003.
Bizier, P. 2007. Gravity sanitary sewer design and construction. 2nd ed. Reston, VA: ASCE.
Boot, J., M. Naqvi, and J. Gumbel. 2014. “A new method for the structural design of flexible liners for gravity pipes of egg-shaped cross section: Theoretical considerations and formulation of the problem.” Thin-Walled Struct. 85 (Jul): 411–418. https://doi.org/10.1016/j.tws.2014.09.001.
Breitung, K. 2019. “The geometry of limit state function graphs and subset simulation: Counterexamples.” Reliab. Eng. Syst. Saf. 182 (Feb): 98–106. https://doi.org/10.1016/j.ress.2018.10.008.
Cao, C. 2012. “Modeling of interaction between corrosion-induced concrete cover crack and steel corrosion rate.” Master’s thesis, Dept. of Civil and Environmental Engineering, Hong Kong Univ. of Science and Technology.
Chegeni, B., S. Jayasuriya, and S. Das. 2019. “Effect of corrosion on thin-walled pipes under combined internal pressure and bending.” Thin-Walled Struct. 143 (Oct): 106218. https://doi.org/10.1016/j.tws.2019.106218.
Chen, J.-B., and J. Li. 2007. “The extreme value distribution and dynamic reliability analysis of nonlinear structures with uncertain parameters.” Struct. Saf. 29 (2): 77–93. https://doi.org/10.1016/j.strusafe.2006.02.002.
Chiles, J., and N. Desassis. 2018. Handbook of mathematical geosciences. Cham, Switzerland: Springer.
Demissie, G., S. Tesfamariam, and R. Sadiq. 2017. “Prediction of pipe failure by considering time-dependent factors: Dynamic Bayesian belief network model.” ASCE-ASME J. Risk Uncertainty Eng. Syst. Part A: Civ. Eng. 3 (4): 04017017. https://doi.org/10.1061/AJRUA6.0000920.
Fakeeha, A. H., and F. A. Abdelaleem. 1996. “The interaction between corrosion processes and mass transfer at rough surfaces.” J. King Saud Univ. Eng. Sci. 8 (Jan): 51–69. https://doi.org/10.1016/S1018-3639(18)31065-1.
Fenner, R. 2000. “Approaches to sewer maintenance: A review.” Urban Water 2 (4): 343–356. https://doi.org/10.1016/S1462-0758(00)00065-0.
Foorginezhad, S., M. Mohseni-Dargah, K. Firoozirad, V. Aryai, A. Razmjou, R. Abbassi, V. Garaniya, A. Beheshti, and M. Asadnia. 2021. “Recent advances in sensing and assessment of corrosion in sewage pipelines.” Process Saf. Environ. Prot. 147 (Mar): 192–213. https://doi.org/10.1016/j.psep.2020.09.009.
Fu, G., W. Yang, C.-Q. Li, and W. Shi. 2019. “Reliability analysis of corrosion affected underground steel pipes considering multiple failure modes and their stochastic correlations.” Tunnelling Underground Space Technol. 87 (Feb): 56–63. https://doi.org/10.1016/j.tust.2019.02.005.
Fytianos, G., V. Baltikas, D. Loukovitis, D. Banti, A. Sfikas, E. Papastergiadis, and P. Samaras. 2020. “Biocorrosion of concrete sewers in Greece: Current practices and challenges.” Sustainability 12 (7): 2638. https://doi.org/10.3390/su12072638.
Grigg, N. S. 2012. Water, wastewater, and stormwater infrastructure management. 2nd ed. Boca Raton, FL: CRC Press.
Guillal, A., M. E. A. Ben Seghier, A. Nourddine, J. A. Correia, Z. Bt Mustaffa, and N.-T. Trung. 2020. “Probabilistic investigation on the reliability assessment of mid- and high-strength pipelines under corrosion and fracture conditions.” Eng. Fail. Anal. 118 (Jan): 104891. https://doi.org/10.1016/j.engfailanal.2020.104891.
Hawari, A., F. Alkadour, M. Elmasry, and T. Zayed. 2020. “A state of the art review on condition assessment models developed for sewer pipelines.” Eng. Appl. Artif. Intell. 93 (Aug): 103721. https://doi.org/10.1016/j.engappai.2020.103721.
Hu, C., B. D. Youn, and P. Wang. 2019. Engineering design under uncertainty and health prognostics. Springer series in reliability engineering. New York: Springer.
Islander, R. L., J. S. Devinny, F. Mansfeld, A. Postyn, and H. Shih. 1991. “Microbial ecology of crown corrosion in sewers.” J. Environ. Eng. 117 (6): 751–770. https://doi.org/10.1061/(ASCE)0733-9372(1991)117:6(751).
Kiureghian, A. D. 2004. Engineering design reliability handbook. 1st ed. Boca Raton, FL: CRC Press.
Kuliczkowska, E. 2016. “Risk of structural failure in concrete sewers due to internal corrosion.” Eng. Fail. Anal. 66 (Jun): 110–119. https://doi.org/10.1016/j.engfailanal.2016.04.026.
Kuliczkowska, E., and A. Parka. 2019. “The structural integrity of corroded concrete sewers.” Eng. Fail. Anal. 104 (Oct): 409–421. https://doi.org/10.1016/j.engfailanal.2019.06.012.
Kuschel, N., and R. Rackwitz. 2000. “Optimal design under time-variant reliability constraints.” Struct. Saf. 22 (2): 113–127. https://doi.org/10.1016/S0167-4730(99)00043-0.
Li, C., and A. Der Kiureghian. 1995. “Mean out-crossing rate of nonlinear response to stochastic input.” In Proc., ICASP-7, 295–302. Rotterdam, Neteherlands: Balkema.
Li, J., J.-B. Chen, and W.-L. Fan. 2007. “The equivalent extreme-value event and evaluation of the structural system reliability.” Struct. Saf. 29 (2): 112–131. https://doi.org/10.1016/j.strusafe.2006.03.002.
Li, J., and Z. P. Mourelatos. 2009. “Time-dependent reliability estimation for dynamic problems using a niching genetic algorithm.” J. Mech. Des. 131 (7): 071009. https://doi.org/10.1115/1.3149842.
Li, S.-X., S.-R. Yu, H.-L. Zeng, J.-H. Li, and R. Liang. 2009. “Predicting corrosion remaining life of underground pipelines with a mechanically-based probabilistic model.” J. Pet. Sci. Eng. 65 (3): 162–166. https://doi.org/10.1016/j.petrol.2008.12.023.
Lutes, L. D., and S. Sarkani. 2013. Reliability analysis of systems subject to first-passage failure. Hanover, MD: National Aeronautics and Space Administration.
Ly, D. K., and T. F. M. Chui. 2012. “Modeling sewage leakage to surrounding groundwater and stormwater drains.” Water Sci. Technol. 66 (12): 2659–2665. https://doi.org/10.2166/wst.2012.496.
Mahmoodian, M., and A. Alani. 2013. “Multi-failure mode assessment of buried concrete pipes subjected to time-dependent deterioration, using system reliability analysis.” J. Fail. Anal. Prev. 13 (5): 634–642. https://doi.org/10.1007/s11668-013-9727-9.
Mazumder, R. K., A. M. Salman, Y. Li, and X. Yu. 2018. “Performance evaluation of water distribution systems and asset management.” J. Infrastruct. Syst. 24 (3): 03118001. https://doi.org/10.1061/(ASCE)IS.1943-555X.0000426.
Mazumder, R. K., A. M. Salman, Y. Li, and X. Yu. 2019. “Reliability analysis of water distribution systems using physical probabilistic pipe failure method.” J. Water Resour. Plann. Manage. 145 (2): 04018097. https://doi.org/10.1061/(ASCE)WR.1943-5452.0001034.
Miran, S. A., Q. Huang, and H. Castaneda. 2016. “Time-dependent reliability analysis of corroded buried pipelines considering external defects.” J. Infrastruct. Syst. 22 (3): 04016019. https://doi.org/10.1061/(ASCE)IS.1943-555X.0000307.
Moamaei, P. 2019. “Remaining service life estimation and probabilistic analysis of reinforced concrete sewer pipeline systems.” Master’s thesis, Civil Engineering Dept., Univ. of Texas at Arlington.
Mohammadi, M. M., M. Najafi, A. Tabesh, J. Riley, and J. Gruber. 2019. Condition prediction of sanitary sewer pipes, 117–126. Reston, VA: ASCE.
Mori, T., T. Nonaka, K. Tazaki, M. Koga, Y. Hikosaka, and S. Noda. 1992. “Interactions of nutrients, moisture and ph on microbial corrosion of concrete sewer pipes.” Water Res. 26 (1): 29–37. https://doi.org/10.1016/0043-1354(92)90107-F.
Murakami, D., Y. Yamagata, and T. Hirano. 2020. “Geostatistics and Gaussian process models.” Chap. 4 in Spatial analysis using big data, edited by Y. Yamagata and H. Seya, 57–112. New York: Academic Press.
OCPA (Ontario Concrete Pipe Association). 2018. OCPA concrete pipe design manual. Toronto: OCPA.
Padival, N. A., W. A. Kimbell, and J. A. Redner. 1995. “Use of iron salts to control dissolved sulfide in trunk sewers.” J. Environ. Eng. 121 (11): 824–829. https://doi.org/10.1061/(ASCE)0733-9372(1995)121:11(824).
Paramasivam, C., and S. Venkatramanan. 2019. “An introduction to various spatial analysis techniques.” Chap. 3 in GIS and geostatistical techniques for groundwater science, edited by S. Venkatramanan, M. V. Prasanna, and S. Y. Chung, 23–30. Amsterdam, Netherlands: Elsevier.
Rajani, B., and J. Makar. 2000. “A methodology to estimate remaining service life of grey cast iron water mains.” Can. J. Civ. Eng. 27 (6): 1259–1272. https://doi.org/10.1139/l00-073.
Ratnayaka, D. D., M. J. Brandt, and K. M. Johnson. 2009. “Pipeline design and construction.” Chap. 15 in Water supply. 6th ed., edited by D. D. Ratnayaka, M. J. Brandt, and K. M. Johnson, 561–598. Boston: Butterworth-Heinemann.
Roehrdanz, P. R., M. Feraud, D. G. Lee, J. C. Means, S. A. Snyder, and P. A. Holden. 2017. “Spatial models of sewer pipe leakage predict the occurrence of wastewater indicators in shallow urban groundwater.” Environ. Sci. Technol. 51 (3): 1213–1223. https://doi.org/10.1021/acs.est.6b05015.
Sabour, M., G. Dezvareh, and R. Bazzazzadeh. 2019. “Corrosion prediction using the weight loss model in the sewer pipes made from sulfur and cement concretes and response surface methodology (RSM).” Constr. Build. Mater. 199 (Aug): 40–49. https://doi.org/10.1016/j.conbuildmat.2018.11.283.
Sand, W. 1997. “Microbial mechanisms of deterioration of inorganic substrates—A general mechanistic overview.” Int. Biodeterior. Biodegrad. 40 (2): 183–190. https://doi.org/10.1016/S0964-8305(97)00048-6.
Schmidt, H., S. Langenfeld, and R. Naß. 1997. “A new corrosion protection coating system for pressure-cast aluminium automotive parts.” Mater. Des. 18 (4): 309–313. https://doi.org/10.1016/S0261-3069(97)00070-8.
Schrupp, K., and R. Rackwitz. 1988. “Outcrossing rates of marked poisson cluster processes in structural reliability.” Appl. Math. Modell. 12 (5): 482–490. https://doi.org/10.1016/0307-904X(88)90085-6.
Seghier, M. E. A., D. Hoche, and M. Zheludkevich. 2022. “Prediction of the internal corrosion rate for oil and gas pipeline: Implementation of ensemble learning techniques.” J. Nat. Gas Sci. Eng. 99 (Jun): 104425. https://doi.org/10.1016/j.jngse.2022.104425.
Seghier, M. E. A. B., B. Keshtegar, K. F. Tee, T. Zayed, R. Abbassi, and N. T. Trung. 2020. “Prediction of maximum pitting corrosion depth in oil and gas pipelines.” Eng. Fail. Anal. 112 (May): 104505. https://doi.org/10.1016/j.engfailanal.2020.104505.
Stanic, N., J. Langeveld, T. Salet, and F. Clemens. 2017. “Relating the structural strength of concrete sewer pipes and material properties retrieved from core samples.” Struct. Infrastruct. Eng. 13 (5): 637–651. https://doi.org/10.1080/15732479.2016.1187631.
Sulikowski, J., and J. Kozubal. 2016. “The durability of a concrete sewer pipeline under deterioration by sulphate and chloride corrosion.” Procedia Eng. 153 (Jan): 698–705. https://doi.org/10.1016/j.proeng.2016.08.229.
Tee, K. F., and L. R. Khan. 2014. “Reliability analysis of underground pipelines with correlations between failure modes and random variables.” Proc. Inst. Mech. Eng., Part O: J. Risk Reliab. 228 (4): 362–370. https://doi.org/10.1177/1748006X135201.
Teixeira, A., C. Guedes Soares, T. Netto, and S. Estefen. 2008. “Reliability of pipelines with corrosion defects.” Int. J. Press. Vessels Pip. 85 (4): 228–237. https://doi.org/10.1016/j.ijpvp.2007.09.002.
Terada, S., and T. Takahashi. 1988. “Failure-conditioned reliability index.” J. Struct. Eng. 114 (4): 942–952. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:4(942).
Wang, C., M. Beer, and B. M. Ayyub. 2021a. “Time-dependent reliability of aging structures: Overview of assessment methods.” ASCE-ASME J. Risk Uncertainty Eng. Syst. Part A: Civ. Eng. 7 (4): 03121003. https://doi.org/10.1061/AJRUA6.0001176.
Wang, W., Y. Wang, B. Zhang, W. Shi, and C.-Q. Li. 2021b. “Failure prediction of buried pipe network with multiple failure modes and spatial randomness of corrosion.” Int. J. Press. Vessels Pip. 191 (Aug): 104367. https://doi.org/10.1016/j.ijpvp.2021.104367.
Wirahadikusumah, R., D. Abraham, and T. Iseley. 2001. “Challenging issues in modeling deterioration of combined sewers.” J. Infrastruct. Syst. 7 (2): 77–84. https://doi.org/10.1061/(ASCE)1076-0342(2001)7:2(77).
Younis, R., and M. A. Knight. 2010a. “Continuation ratio model for the performance behavior of wastewater collection networks.” Tunnelling Underground Space Technol. 25 (6): 660–669. https://doi.org/10.1016/j.tust.2010.06.003.
Younis, R., and M. A. Knight. 2010b. “A probability model for investigating the trend of structural deterioration of wastewater pipelines.” Tunnelling Underground Space Technol. 25 (6): 670–680. https://doi.org/10.1016/j.tust.2010.05.007.
Zhai, K., H. Fang, C. Guo, B. Fu, P. Ni, H. Ma, H. He, and F. Wang. 2021. “Mechanical properties of CFRP-strengthened prestressed concrete cylinder pipe based on multi-field coupling.” Thin-Walled Struct. 162 (May): 107629. https://doi.org/10.1016/j.tws.2021.107629.
Zhou, R., W. Fang, and J. Wu. 2020. “A risk assessment model of a sewer pipeline in an underground utility tunnel based on a Bayesian network.” Tunnelling Underground Space Technol. 103 (Sep): 103473. https://doi.org/10.1016/j.tust.2020.103473.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jul 28, 2022
Accepted: Nov 17, 2022
Published online: Jan 12, 2023
Published in print: Mar 1, 2023
Discussion open until: Jun 12, 2023
ASCE Technical Topics:
- Analysis (by type)
- Concrete pipes
- Corrosion
- Deterioration
- Engineering fundamentals
- Failure analysis
- Infrastructure
- Materials characterization
- Materials engineering
- Mathematics
- Pipe failures
- Pipe materials
- Pipeline management
- Pipeline systems
- Pipes
- Probability
- System analysis
- System reliability
- Systems engineering
- Systems management
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.