Probabilistic Seismic Capacity Model of Pier Columns: A Semiparametric Regression Approach
Publication: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
Volume 9, Issue 3
Abstract
Piers are usually the most vulnerable components in a bridge structure and generally undergo excessive deformation, which will lead to damage and even whole structural collapse. This paper investigates the probabilistic seismic deformation capacities of reinforced concrete piers under different limit states for two engineering demand parameters, i.e., the drift ratio and displacement ductility. Based on sample data from the UW-PEER database, a penalized generalized additive model is used for predictor variable selections and to determine whether the mechanism of each predictor on the seismic capacity is linear or nonlinear. The influence of a predictor that illustrated a nonlinear pattern is modeled by a Gaussian process, and Bayesian semiparametric regression is conducted in the R environment to obtain posteriori estimations of the capacity measures. The results indicate that the ratios of the model predictions to the experimental observations are all around 1.0, which proves the unbiasedness of the models. Compared with previous seismic capacity models, the prediction of seismic capacity measures shows higher accuracy, lower dispersion, and better portrayal of uncertainties. The proposed model based on Bayesian semiparametric regression provides a performance improvement in the seismic capacity evaluation of the bridge structures, which can be used for the subsequent bridge seismic fragility and risk assessment.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors appreciate the financial support from Natural Science Foundation of Fujian Province (2020J01478).
References
Andrew, G. 2020. “Prior choice recommendations.” Accessed August 2, 2022. https://github.com/stan-dev/stan/wiki/Prior-Choice-Recommendations.
Bae, S., and O. Bayrak. 2008. “Plastic hinge length of reinforced concrete columns.” ACI Struct. J. 105 (3): 290.
Baker, A., and A. Amarakone. 1965. “Inelastic hyperstatic frames analysis.” Spec. Publ. 12 (Jan): 85–142. https://doi.org/10.14359/16715.
Berry, M. P., and M. O. Eberhard. 2003. “Performance models for flexural damage in reinforce concrete columns.” In Pacific earthquake engineering research center report. Berkeley, CA: Univ. of California, Berkeley.
Berry, M. P., and M. O. Eberhard. 2008. “Performance modeling strategies for modern reinforced concrete bridge.” In Pacific earthquake engineering research center report. Berkeley, CA: Univ. of California, Berkeley.
Bürkner, P. 2017. “An R package for Bayesian multilevel models using Stan.” J. Stat. Software 80 (1): 1–28. https://doi.org/10.18637/jss.v080.i01.
Chouldechova, A., and T. Hastie. 2015. “Generalized additive model selection.” Preprint, submitted May18, 2021. http://arxiv.org/abs/1506.03850.
Corley, W. G. 1966. “Rotational capacity of reinforced concrete beams.” J. Struct. Div. 92 (5): 121–146. https://doi.org/10.1061/JSDEAG.0001504.
Demmler, A., and C. Reinsch. 1975. “Oscillation matrices with spline smoothing.” Numer. Math. 24 (5): 375–382. https://doi.org/10.1007/BF01437406.
Du, A., and J. E. Padgett. 2020a. “Investigation of multivariate seismic surrogate demand modeling for multi-response structural systems.” Eng. Struct. 207 (Mar): 110210. https://doi.org/10.1016/j.engstruct.2020.110210.
Du, A., and J. E. Padgett. 2020b. “Toward confident regional seismic risk assessment of spatially distributed structural portfolios via entropy-based intensity measure selection.” Bull. Earthquake Eng. 18 (Nov): 6283–6311. https://doi.org/10.1007/s10518-020-00948-3.
Elwood, K. J., and J. P. Moehle. 2005. “Drift capacity of reinforced concrete columns with light transverse reinforcement.” Earthquake Spectra 21 (1): 71–89. https://doi.org/10.1193/1.1849774.
Gardoni, P., A. Der Kiureghian, and K. M. Mosalam. 2002. “Probabilistic capacity models and fragility estimates for reinforced concrete columns based on experimental observations.” J. Eng. Mech. 128 (10): 1024–1038. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:10(1024).
Gardoni, P., K. M. Mosalam, and A. Der Kiureghian. 2003. “Probabilistic seismic demand models and fragility estimates for RC bridges.” Supplement, J. Earthquake Eng. 7 (S1): 79–106. https://doi.org/10.1080/13632460309350474.
Gelman, A., J. B. Carlin, and H. S. Stern. 2013. Bayesian data analysis. Boca Raton, FL: CRC Press.
Gill, W. D., R. Park, and M. J. N. Priestley. 1979. Ductility of rectangular reinforced concrete columns with axial load. Christchurch, New Zealand: Univ. of Canterbury.
Hastie, T., and R. Tibshirani. 1990. Generalized additive models. Boca Raton, FL: CRC Press.
Hastie, T., R. Tibshirani, and J. H. Friedman. 2009. The elements of statistical learning: Data mining, inference, and prediction, 153–156. New York: Springer.
Kato, D., and K. Ohnishi. 2002. “Axial load carrying capacity of R/C columns under lateral load reversals.” In Proc., 3rd US-Japan Workshop on Performance-Based Earthquake Engineering Methodology for Reinforced Concrete Building Structures, 247–255. Berkeley, CA: Univ. of California.
Mangalathu, S., G. Heo, and J.-S. Jeon. 2018. “Artificial neural network based multi-dimensional fragility development of skewed concrete bridge classes.” Eng Struct 162 (May): 166–176. https://doi.org/10.1016/j.engstruct.2018.01.053.
Mattock, A. 1964. “Rotational capacity of hinging regions in reinforced concrete beams.” In Proc., ASCE-ACI Int., 143–180. Reston, VA: ASCE.
Moyer, M. J., and M. J. Kowalsky. 2002. “Influence of tension strain on buckling of reinforcement in RC bridge columns.” ACI Struct. J. 100 (1): 75–85.
Ning, C.-L., and B. Li. 2016. “Probabilistic approach for estimating plastic hinge length of reinforced concrete columns.” J. Struct. Eng. 142 (3): 04015164. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001436.
Panagiotakos, T. B., and M. N. Fardis. 2001. “Deformations of reinforced concrete members at yielding and ultimate.” ACI Struct. J. 98 (2): 135–148. https://doi.org/10.14359/10181.
Park, R., and T. Paulay. 1991. Reinforced concrete structures. New York: Wiley.
Paulay, T., and M. Priestley. 1992. Seismic design of reinforced concrete and masonry buildings. New York: Wiley.
Priestley, M., and R. Park. 1987. “Strength and ductility of concrete bridge columns under seismic loading.” Struct. J. 84 (1): 61–76.
Pujol, S., J. Ramfrez, and M. Sozen. 1999. “Drift capacity of reinforced concrete columns subjected to cyclic shear reversals.” Spec. Publ. 187 (Jun): 255–274. https://doi.org/10.14359/5602.
Rasmussen, C. E., and C. Williams. 2006. Gaussian processes for machine learning. Cambridge, MA: MIT Press.
Sezen, H. 2002. Seismic behavior and modeling of reinforced concrete building columns. Berkeley, CA: Univ. of California, Berkeley.
Stan Development Team. 2022. “Fitting a Gaussian process.” Accessed August 2, 2022. https://mc-stan.org/docs/stan-users-guide/fit-gp.html#priors-gp.section.
University of Washington. 2020. “The UW-PEER reinforced concrete column test database.” Accessed October 31, 2020. http://www.ce.washington.edu/peera1.
Wang, X., X. Yuan, R. Feng, and Y. Dong. 2022. “Data-driven probabilistic curvature capacity modeling of circular RC columns facilitating seismic fragility analyses of highway bridges.” Earthquake Eng. Resilience 1 (2): 211–224. https://doi.org/10.1002/eer2.14.
Xie, Y., M. Ebad Sichani, J. E. Padgett, and R. DesRoches. 2020. “The promise of implementing machine learning in earthquake engineering: A state-of-the-art review.” Earthquake Spectra 36 (4): 1769–1801. https://doi.org/10.1177/8755293020919419.
Xu, J.-G., W. Hong, J. Zhang, S.-T. Hou, and G. Wu. 2022. “Seismic performance assessment of corroded RC columns based on data-driven machine-learning approach.” Eng. Struct. 255 (Mar): 113936. https://doi.org/10.1016/j.engstruct.2022.113936.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Dec 20, 2022
Accepted: Mar 18, 2023
Published online: Jun 7, 2023
Published in print: Sep 1, 2023
Discussion open until: Nov 7, 2023
ASCE Technical Topics:
- Analysis (by type)
- Bayesian analysis
- Earthquake engineering
- Engineering fundamentals
- Geotechnical engineering
- Hydraulic engineering
- Hydraulic structures
- Mathematics
- Models (by type)
- Parameters (statistics)
- Piers
- Ports and harbors
- Probability
- Regression analysis
- Seismic effects
- Seismic tests
- Statistical analysis (by type)
- Statistics
- Structural models
- Tests (by type)
- Water and water resources
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Libo Chen, Ruchun Mo, Yu Chen, Zhan Guo, Zhenfeng Zheng, Investigation of Intraclass Correlation of Seismic Capacity for RC Bridge Piers Based on Hierarchical Model, ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 10.1061/AJRUA6.RUENG-1253, 10, 3, (2024).