Development of an Efficient Response Surface Method for Highly Nonlinear Systems from Sparse Sampling Data Using Bayesian Compressive Sensing
Publication: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
Volume 7, Issue 4
Abstract
A main challenge for risk assessment on geotechnical systems is the computational effort required when stochastic sampling methods are used. Because the deterministic models used for geotechnical systems are often complicated and highly nonlinear, it is time-consuming to perform the deterministic analysis for each stochastic sample. The computational effort would become quite demanding, and even unrealistic, if direct Monte Carlo simulation (MCS) is used. To tackle this challenge, this study develops an efficient response surface method (RSM) that significantly improves computational efficiency and achieves the accuracy simultaneously. The proposed method is based on a novel sampling strategy called Bayesian compressive sensing (BCS). The proposed method is able to accurately reconstruct a highly nonlinear response surface from a small number of sampling points. Equations for the proposed RSM method are derived, and the attention is paid to extending the existing BCS method that deals only with low-dimensional data [e.g., one, two, or three-dimensional (1D, 2D, or 3D)] to high-dimensional data in RSM. The proposed method is illustrated using a highly nonlinear analytical function and a slope reliability analysis problem with consideration of spatial variability in soil properties. The results show that the proposed response surface method performs well and outperforms other response surface methods (e.g., response surface methods based on the kriging method or polynomial chaos expansion), particularly when sampling data are sparse.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code generated or used during the study are available from the corresponding author upon reasonable request.
Acknowledgments
The work described in this paper was supported by grants from the Research Grants Council of the Hong Kong Special Administrative Region, China (Project Nos. CityU 11213117 and CityU 11213119). The financial supports are gratefully acknowledged.
References
Bect, J., D. Ginsbourger, L. Li, V. Picheny, and E. Vazquez. 2012. “Sequential design of computer experiments for the estimation of a probability of failure.” Stat. Comput. 22 (3): 773–793. https://doi.org/10.1007/s11222-011-9241-4.
Blatman, G., and B. Sudret. 2011. “Adaptive sparse polynomial chaos expansion based on least angle regression.” J. Comput. Phys. 230 (6): 2345–2367. https://doi.org/10.1016/j.jcp.2010.12.021.
Candès, E. J., J. K. Romberg, and T. Tao. 2006. “Stable signal recovery from incomplete and inaccurate measurements.” Commun. Pure Appl. Math. 59 (8): 1207–1223. https://doi.org/10.1002/cpa.20124.
Candès, E. J., and M. B. Wakin. 2008. “An introduction to compressive sampling.” IEEE Signal Process Mag. 25 (2): 21–30.
Donoho, D. L. 2006. “Compressed sensing.” IEEE Trans. Inf. Theory 52 (4): 1289–1306. https://doi.org/10.1109/TIT.2006.871582.
Dubourg, V., and B. Sudret. 2014. “Meta-model-based importance sampling for reliability sensitivity analysis.” Struct. Saf. 49 (Jul): 27–36. https://doi.org/10.1016/j.strusafe.2013.08.010.
Echard, B., N. Gayton, and M. Lemarire. 2011. “AK-MCS: An active learning reliability method combining Kriging and Monte Carlo Simulation.” Struct. Saf. 33 (2): 145–154. https://doi.org/10.1016/j.strusafe.2011.01.002.
Huang, S. P. 2001. Simulation of random process using Karhunen-Loève expansion. Singapore: National Univ. of Singapore.
Huang, X., J. Chen, and H. Zhu. 2016. “Assessing small failure probabilities by AK–SS: An active learning method combining Kriging and Subset Simulation.” Struct. Saf. 59 (Mar): 86–95. https://doi.org/10.1016/j.strusafe.2015.12.003.
Isukapalli, S. S., A. Roy, and P. G. Georgopoulos. 1998. “Stochastic response surface methods for uncertainty propagation: Application to environmental and biological systems.” Risk Anal. 18 (3): 351–363. https://doi.org/10.1111/j.1539-6924.1998.tb01301.x.
Ji, J., and B. K. Low. 2012. “Stratified response surfaces for system probabilistic evaluation of slopes.” J. Geotech. Geoenviron. Eng. 138 (11): 1398–1406. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000711.
Ji, S., D. Dunson, and L. Carin. 2009. “Multitask compressive sensing.” IEEE Trans. Signal Process. 57 (1): 92–106. https://doi.org/10.1109/TSP.2008.2005866.
Ji, S., Y. Xue, and L. Carin. 2008. “Bayesian compressive sensing.” IEEE Trans. Signal Process. 56 (6): 2346–2356. https://doi.org/10.1109/TSP.2007.914345.
Jiang, S. H., D. Q. Li, Z. J. Cao, C. B. Zhou, and K. K. Phoon. 2015. “Efficient system reliability analysis of slope stability in spatially variable soils using Monte Carlo simulation.” J. Geotech. Geoenviron. Eng. 141 (2): 04014096. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001227.
Jiang, S. H., D. Q. Li, L. M. Zhang, and C. B. Zhou. 2014. “Slope reliability analysis considering spatially variable shear strength parameters using a non-intrusive stochastic finite element method.” Eng. Geol. 168 (Jan): 120–128. https://doi.org/10.1016/j.enggeo.2013.11.006.
Kaymaz, I. 2005. “Application of Kriging method to structural reliability problems.” Struct. Saf. 27 (2): 133–151. https://doi.org/10.1016/j.strusafe.2004.09.001.
Laloy, E., B. Rogiers, J. A. Vrugt, D. Mallants, and D. Jacques. 2013. “Efficient posterior exploration of a high-dimensional groundwater model from two-stage Markov chain Monte Carlo simulation and polynomial chaos expansion.” Water Resour. Res. 49 (5): 2664–2682. https://doi.org/10.1002/wrcr.20226.
Legates, D., and G. Mccabe. 1997. “Evaluating the use of ‘Goodness-of-Fit’ measures in hydrologic and hydroclimatic model validation.” Water Resour. Res. 35 (1): 233–241. https://doi.org/10.1029/1998WR900018.
Li, D. Q., Y. F. Chen, W. B. Lu, and C. B. Zhou. 2011. “Stochastic response surface method for reliability analysis of rock slopes involving correlated non-normal variables.” Comput. Geotech. 38 (1): 58–68. https://doi.org/10.1016/j.compgeo.2010.10.006.
Li, D. Q., S. H. Jiang, Z. J. Cao, C. B. Zhou, X. Y. Li, and L. M. Zhang. 2015. “Efficient 3-D reliability analysis of the 530 m high abutment slope at Jinping I Hydropower Station during construction.” Eng. Geol. 195 (Sep): 269–281. https://doi.org/10.1016/j.enggeo.2015.06.007.
Li, D. Q., T. Xiao, L. M. Zhang, and Z. J. Cao. 2019. “Stepwise covariance matrix decomposition for efficient simulation of multivariate large-scale three-dimensional random fields.” Appl. Math. Modell. 68 (Apr): 169–181. https://doi.org/10.1016/j.apm.2018.11.011.
Li, D. Q., D. Zheng, Z. J. Cao, X. S. Tang, and K. K. Phoon. 2016. “Response surface methods for slope reliability analysis: Review and comparison.” Eng. Geol. 203 (Mar): 3–14. https://doi.org/10.1016/j.enggeo.2015.09.003.
Li, T. Z., and X. L. Yang. 2019. “An efficient uniform design for Kriging-based response surface method and its applications.” Comput. Geotech. 109 (May): 12–22. https://doi.org/10.1016/j.compgeo.2019.01.009.
Liu, L. L., and Y. M. Cheng. 2016. “Efficient system reliability analysis of soil slopes using multivariate adaptive regression splines-based Monte Carlo simulation.” Comput. Geotech. 79 (Oct): 41–54. https://doi.org/10.1016/j.compgeo.2016.05.001.
Liu, L. L., S. H. Zhang, and Y. M. Cheng. 2019. “Advanced reliability analysis of slopes in spatially variable soils using multivariate adaptive regression splines.” Geosci. Front. 10 (2): 671–682. https://doi.org/10.1016/j.gsf.2018.03.013.
Lophaven, S. N., H. B. Nielsen, and J. Søndergaard. 2002. DACE: A MATLAB kriging toolbox. Copenhagen, Denmark: Technical Univ. of Denmark.
Luo, X. F., T. Cheng, X. Li, and J. Zhou. 2012. “Slope safety factor search strategy for multiple sample points for reliability analysis.” Eng. Geol. 129 (Mar): 27–37. https://doi.org/10.1016/j.enggeo.2012.01.006.
McKay, M. D., W. J. Conover, and R. J. Beckman. 1979. “A comparison of three methods for selecting values of input variables in the analysis of output from a computer code.” Technometrics 21 (2): 239–245.
Montoya-Noguera, S., T. Zhao, Y. Hu, Y. Wang, and K. K. Phoon. 2019. “Simulation of nonstationary non-Gaussian random fields from sparse measurements using Bayesian compressive sampling and Karhunen-Loève expansion.” Struct. Saf. 79 (Jul): 66–79. https://doi.org/10.1016/j.strusafe.2019.03.006.
Nataf, A. 1962. “Détermination des distributions de probabilités dont les marges sont données.” C.R. Acad. Sci. 225: 42–43.
Nyquist, H. 1928. “Certain topics in telegraph transmission theory.” Trans. Am. Inst. Electr. Eng. 47 (2): 617–644. https://doi.org/10.1109/T-AIEE.1928.5055024.
Phoon, K. K. 1995. “Reliability-based design of foundations for transmission line structures.” Ph.D. thesis, School of Civil and Environmental Engineering, Cornell Univ.
Qi, X. H., and W. H. Zhou. 2017. “An efficient probabilistic back-analysis method for braced excavations using wall deflection data at multiple points.” Comput. Geotech. 85 (May): 186–198. https://doi.org/10.1016/j.compgeo.2016.12.032.
Rastrigin, L. 1974. “System of extremal control.” In Theoretical foundations of engineering cybernetics series. Moscow, Russia: Nauka.
Rudolph, G. 1990. “Globale optimierung mit parallelen evolutionsstrategien.” Master thesis, Dept. of Computer Science, Univ. of Dortmund.
Schöbi, R. 2017. “Surrogate models for uncertainty quantification in the context of imprecise probability modelling.” Ph.D. thesis, Dept. of Science, ETH Zurich.
Schöbi, R., B. Sudret, and J. Wiart. 2015. “Polynomial-chaos-based kriging.” Int. J. Uncertainty Quantif. 5 (2): 171–193.
Simpson, T. W., T. M. Mauery, J. J. Korte, and F. Mistree. 2001. “Kriging models for global approximation in simulation-based multidisciplinary design optimization.” AIAA J. 39 (12): 2233–2241. https://doi.org/10.2514/2.1234.
Sivia, D. S., and J. Skilling. 2006. Data analysis: A Bayesian tutorial. New York: Oxford University Press.
Smith, I. M., D. V. Griffiths, and L. Margetts. 2014. Programming the finite element method. 5th ed. New York: Wiley.
Sudret, B. 2008. “Global sensitivity analysis using polynomial chaos expansions.” Reliab. Eng. Syst. Saf. 93 (7): 964–979. https://doi.org/10.1016/j.ress.2007.04.002.
Sudret, B. 2012. “Meta-models for structural reliability and uncertainty quantification.” In Proc., 5th Asian-Pacific Symp. on Structural Reliability and Its Applications, edited by K. K. Phoon, M. Beer, S. T. Quek, and S. D. Pang, 53–76. Singapore: Research Publishing.
Thomas, B. 2002. “Parallel 3-D viscoelastic finite difference seismic modelling.” Comput. Geosci. 28 (8): 887–899. https://doi.org/10.1016/S0098-3004(02)00006-7.
Tipping, M. E. 2001. “Sparse Bayesian learning and the relevance vector machine.” J. Mach. Learn. Res. 1 (Jun): 211–244.
Wang, Y., O. V. Akeju, and T. Zhao. 2017. “Interpolation of spatially varying but sparsely measured geo-data: A comparative study.” Eng. Geol. 231 (Dec): 200–217. https://doi.org/10.1016/j.enggeo.2017.10.019.
Wang, Y., and P. Li. 2021. “Data-driven determination of sample number and efficient sampling locations for geotechnical site investigation of a cross-section using Voronoi diagram and Bayesian compressive sampling.” Comput. Geotech. 130 (Feb): 103898. https://doi.org/10.1016/j.compgeo.2020.103898.
Wang, Y., and T. Zhao. 2016. “Interpretation of soil property profile from limited measurement data: A compressive sampling perspective.” Can. Geotech. J. 53 (9): 1547–1559. https://doi.org/10.1139/cgj-2015-0545.
Wang, Y., and T. Zhao. 2017. “Statistical interpretation of soil property profiles from sparse data using Bayesian compressive sampling.” Géotechnique 67 (6): 523–536. https://doi.org/10.1680/jgeot.16.P.143.
Wang, Y., T. Zhao, Y. Hu, and K. K. Phoon. 2019a. “Simulation of random fields with trend from sparse measurements without detrending.” J. Eng. Mech. 145 (2): 04018130. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001560.
Wang, Y., T. Zhao, and K. K. Phoon. 2018. “Direct simulation of random field samples from sparsely measured geotechnical data with consideration of uncertainty in interpretation.” Can. Geotech. J. 55 (6): 862–880. https://doi.org/10.1139/cgj-2017-0254.
Wang, Y., T. Zhao, and K. K. Phoon. 2019b. “Statistical inference of random field auto-correlation structure from multiple sets of incomplete and sparse measurements using Bayesian compressive sampling-based bootstrapping.” Mech. Syst. Sig. Process. 124 (Jun): 217–236. https://doi.org/10.1016/j.ymssp.2019.01.049.
Xiao, T., D. Q. Li, Z. J. Cao, S. K. Au, and K. K. Phoon. 2016. “Three-dimensional slope reliability and risk assessment using auxiliary random finite element method.” Comput. Geotech. 79 (Oct): 146–158. https://doi.org/10.1016/j.compgeo.2016.05.024.
Xu, B., and B. K. Low. 2006. “Probabilistic stability analyses of embankments based on finite element method.” J. Geotech. Geoenviron. Eng. 132 (11): 1444–1454. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:11(1444).
Zhang, J., H. W. Huang, and K. K. Phoon. 2013. “Application of the Kriging-based response surface method to the system reliability of soil slopes.” J. Geotech. Geoenviron. Eng. 139 (4): 651–655. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000801.
Zhang, J., L. M. Zhang, and W. H. Tang. 2011a. “Kriging numerical models for geotechnical reliability analysis.” Soils Found. 51 (6): 1169–1177. https://doi.org/10.3208/sandf.51.1169.
Zhang, J., L. M. Zhang, and W. H. Tang. 2011b. “New methods for system reliability analysis of soil slopes.” Can. Geotech. J. 48 (7): 1138–1148. https://doi.org/10.1139/t11-009.
Zhang, S., Y. Li, J. Li, and L. Liu. 2020. “Reliability analysis of layered soil slopes considering different spatial autocorrelation structures.” Appl. Sci. 10 (11): 4029. https://doi.org/10.3390/app10114029.
Zhang, Y., L. Comerford, M. Beer, and I. Kougioumtzoglou. 2015. “Compressive sensing for power spectrum estimation of multi-dimensional processes under missing data.” In Proc., 2015 Int. Conf. on Systems, Signals and Image Processing, 162–165. New York: IEEE.
Zhao, T., and Y. Wang. 2018. “Interpretation of pile lateral response from deflection measurement data: A compressive sampling-based method.” Soils Found. 58 (4): 957–971. https://doi.org/10.1016/j.sandf.2018.05.002.
Zhao, T., and Y. Wang. 2019. “Determination of efficient sampling locations in geotechnical site characterization using information entropy and Bayesian compressive.” Can. Geotech. J. 56 (11): 1622–1637. https://doi.org/10.1139/cgj-2018-0286.
Zhao, T., and Y. Wang. 2020a. “Differentiation of discrete data with unequal measurement intervals and quantification of uncertainty in differentiation using Bayesian compressive sampling.” Comput. Geotech. 122 (Jun): 103537. https://doi.org/10.1016/j.compgeo.2020.103537.
Zhao, T., and Y. Wang. 2020b. “Non-parametric simulation of non-stationary non-Gaussian 3D random field samples directly from sparse measurements using signal decomposition and Markov Chain Monte Carlo (MCMC) simulation.” Reliab. Eng. Syst. Saf. 203 (Nov): 107087. https://doi.org/10.1016/j.ress.2020.107087.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jan 24, 2021
Accepted: Apr 12, 2021
Published online: Jul 31, 2021
Published in print: Dec 1, 2021
Discussion open until: Dec 31, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Haoyu Zhang, Shicheng Xue, Yong Huang, Hui Li, Towards Probabilistic Robust and Sparsity-Free Compressive Sampling in Civil Engineering: A Review, International Journal of Structural Stability and Dynamics, 10.1142/S021945542340028X, 23, 16n18, (2023).
- Peiping Li, Yu Wang, Interpretation of spatio-temporal variation of precipitation from spatially sparse measurements using Bayesian compressive sensing (BCS), Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards, 10.1080/17499518.2023.2188464, 17, 3, (554-571), (2023).
- Peiping Li, Yu Wang, Effect of Learning Function on Reliability Analysis of Geotechnical Engineering Systems Using Adaptive Bayesian Compressive Sensing and Monte Carlo Simulation, Geo-Risk 2023, 10.1061/9780784484975.036, (340-350), (2023).
- Ikumasa Yoshida, Tomoka Nakamura, Siu-Kui Au, Bayesian updating of model parameters using adaptive Gaussian process regression and particle filter, Structural Safety, 10.1016/j.strusafe.2023.102328, 102, (102328), (2023).
- Xian Liu, Yadong Liu, Xueyou Li, Zhiyong Yang, Shui-Hua Jiang, Efficient adaptive reliability-based design optimization for geotechnical structures with multiple design parameters, Computers and Geotechnics, 10.1016/j.compgeo.2023.105675, 162, (105675), (2023).
- Shui-Hua Jiang, Guang-Yuan Zhu, Ze Zhou Wang, Zhuo-Tao Huang, Jinsong Huang, Data augmentation for CNN-based probabilistic slope stability analysis in spatially variable soils, Computers and Geotechnics, 10.1016/j.compgeo.2023.105501, 160, (105501), (2023).
- Peiping Li, Yu Wang, Zheng Guan, Non-parametric generation of multivariate cross-correlated random fields directly from sparse measurements using Bayesian compressive sensing and Markov chain Monte Carlo simulation, Stochastic Environmental Research and Risk Assessment, 10.1007/s00477-023-02523-z, 37, 12, (4607-4628), (2023).
- Xin Gu, Qiang Ou, Wengang Zhang, Jie Fu, Shuli Hao, A novel subroutine for estimating unsaturated slope stability considering water fluctuation in spatially variable soils, Bulletin of Engineering Geology and the Environment, 10.1007/s10064-022-03025-y, 82, 1, (2022).