Chapter
May 31, 2018
World Environmental and Water Resources Congress 2018

Coupled Reservoir-Geomechanical Modeling and Stability Analysis during CO2 Injection into Minjur Sandstone Reservoir

Publication: World Environmental and Water Resources Congress 2018: Groundwater, Sustainability, and Hydro-Climate/Climate Change

ABSTRACT

The continuous emission of carbon dioxide to the environment has caused major climatic changes and is the main cause of the global warming. In order to mitigate the level of carbon dioxide in the atmosphere, the excess amount of carbon dioxide needs to be permanently stored in the deep sedimentary rocks. The pore pressure buildup during carbon dioxide injection process needs to be monitored in order to prevent the failure of the reservoir and hence the leakage of the stored carbon dioxide. In this paper, coupled geomechanical modeling and stability analysis are performed for the Minjur Sandstone reservoir in Saudi Arabia. The pore pressure buildup and ground uplift was calculated during carbon dioxide injection into the reservoir. The Mohr-Coulomb failure criterion was utilized to perform the stability analysis of the reservoir. The stability analysis was performed for the reservoir which suggested safe carbon dioxide injection parameters based on the changes in the pore pressure and horizontal stresses in the reservoir.

Get full access to this chapter

View all available purchase options and get full access to this chapter.

ACKNOWLEDGMENTS

This research work was funded by the National Plan for Science, Technology and Innovation (MAARIFAH) – King Abdul-Aziz City for Science and Technology – through the Science & Technology Unit at King Fahd University of Petroleum & Minerals (KFUPM) – the Kingdom of Saudi Arabia, award number (TIC-CCS-1).

REFERENCES

Abdulkader, M. A. (2005). “Ghawar: The Anatomy of the World's Largest Oil Field.” Saudi Aramco Search and DiscoveryArticle#20026.
Al-Shuhail, A. A., Alshuhail, A. A., and Khulief, Y. A. (2014). “CO2Leakage Detection using Geophysical Methods under Arid Near-surface Conditions.” Progress Report of KACST TIC-CCS Project number TIC-CCS-1, 47.
Ashkan, B. et al. (2013). “Simulation study of CO2 sequestration potential of the Mary Lee coal zone, Black Warrior basin.” Environmental Earth Sciences, 70, 2501–2509.
Barry, J. P., Buck, K. R., Lovera, C. F., Kuhnz, L., Whaling, P. J., Peltzer, E. T., Walz, P., and Brewer, P. G. (2004). “Effects of direct ocean CO2injection on deep-sea meiofauna.” Journal of Oceanography, 60(4), 759–766.
Barry, J. P. et al. (2003). “Deep-sea field experiments on the biological impacts of direct deep-sea CO2injection.” In Proceedings of the Second Annual Conference on Carbon Sequestration, 1, 5–8.
Bissell, R. C., Vasco, D. W., Atbi, M., Hamdani, M., Okwelegbe, M., and Goldwater, M. H. (2011). “A full field simulation of the in Salah gas production and CO2storage project using a coupled geo-mechanical and thermal fluid flow simulator.” Energy Procedia, 4, 3290–3297.
Boosari, S. S. H., Aybar, U., and Eshkalak, M. O. (2015). “Carbon dioxide storage and Sequestration in unconventional shale reservoirs.” Journal of Geoscience and Environment Protection, 3(1), 7–15.
Chowdhury, S., and Al-Zahrani, M. (2015). “Characterizing water resources and trends of sector wise water consumptions in Saudi Arabia.” Journal of King Saud University-EngineeringSciences, 27(1), 68–82.
Davis, E. J. (2011). “Interpretation of CO2Sequestration-Induced Surface Deformation over KB-502 at Krechba, Algeria,” In SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers.
Eiken, O., Ringrose, P., Hermanrud, C., Nazarian, B., Torp, T. A. and Høier, L. (2011). “Lessons learned from 14 years of CCS operations: Sleipner, In Salah and Snøhvit.” Energy Procedia,” 4, 5541–5548.
Evans, J. P., Forster, C. B., and Goddard, J. V. (1997). “Permeability of fault-related rocks, and implications for hydraulic structure of fault zones.” Journal of structural Geology, 19(11), 1393–1404.
Figueiredo, B., Tsang, C. F., Rutqvist, J., Bensabat, J., and Niemi, A. (2015). “Coupled hydro mechanical processes and fault reactivation induced by CO2injection in a three-layer storage formation.” International Journal of Greenhouse Gas Control, 39, 432–448.
Gibbins, J., and Chalmers, H. (2008). “Carbon capture and storage,” Energy Policy, 36, 4317–4322.
Heidbach, O. et al. (2008). “The World Stress Map based on the database release 2008, equatorial scale 1:46,000,000, Commission for the Geological Map of the World.” Paris 2009.
Holzbecher, E. (2013). “Poroelasticity Benchmarking for FEM on Analytical Solutions.” Excerpt from the Proceedings of the COMSOL Conference Rotterdam, 1–7.
Jourde, H., Flodin, E. A., Aydin, A., Durlofsky, L. J., and Wen, X. H. (2002). “Computing permeability of fault zones in eolian sandstone from outcrop measurements.” AAPG bulletin, 86(7), 1187–2000.
Leung, D. Y., Caramanna, G., and Maroto-Valer, M. M. (2014). “An overview of current status of carbon dioxide capture and storage technologies.” Renewable and Sustainable Energy Reviews, 39, 426–443.
Matter, J. M., Takahashi, T., and Goldberg, D. (2007). “Experimental evaluation of in situ CO2-water-rock reactions during CO2injection in basaltic rocks: Implications for geological CO2sequestration.” Geochemistry, Geophysics, Geo-systems, 8(2), 1–19.
Martin, A. Z. (2001). “Late Permian to Holocene Paleofacies Evolution of the Arabian Plate and its Hydrocarbon Occurrences.” Geo Arabia, 6, 445–504.
Nordbotten, J. M., Celia, M. A., and Bachu, S. (2005). “Injection and storage of CO2in deep saline aquifers: analytical solution for CO2plume evolution during injection.” Transport in Porous media, 58(3), 339–360.
Ringrose, P. S., Mathieson, A. S., Wright, I. W., Selama, F., Hansen, O., Bissell, R., Saoula, N. and Midgley, J. (2013). “The In Salah CO2storage project: lessons learned and knowledge transfer,” EnergyProcedia, 37, 6226–6236.
Robert, B. et al. (2007). “Regional Depositional History, Stratigraphy and Palaeo geography of the Shuaiba.” GeoArabia, 12, 135–152.
Rubin, E. S., Davison, J. E., and Herzog, H. J. (2015). “The cost of CO2capture and Storage.” International Journal of Greenhouse gas control, 40, 378–400.
Rutqvist, J., Vasco, D. W., and Myer, L. (2010). “Coupled reservoir geomechanical analysis of CO2 injection and ground deformations at In Salah, Algeria.” Int. J. Greenh. Gas Control, 4, 225–230.
Selma, L., Seigo, O., Dohle, S., and Siegrist, M. (2014). “Public perception of carbon capture andstorage (CCS): A review.” Renewable and Sustainable Energy Reviews, 38, 848–863.
Tan, X., and Heinz, K. (2014). “Numerical study of variation in Biot’s coefficient with respect to microstructure of rocks.” Tectono-physics, 61, 159–171.
Tore, B., Eyvind, A., and Elin, S. (2009). “Safe Storage Parameters during CO2Injection Using Coupled Reservoir Geomechanical Analysis.” Excerpt from the Proceedings of the COMSOL Conference Milan, 1–7.
Trupp, M., Frontczak, J., and Torkington, J. (2013). “The Gorgon CO2Injection Project–2012 Update.” Energy Procedia, 37, 6237–6247.
Vilarrasa, V., and Carrera, J. (2015). “Geologic carbon storage is unlikely to trigger large earthquakes and reactivate faults through which CO2could leak.” Proceedings of the National Academy of Sciences, 112(19), 5938–5943.
Vidas, H., Hugman, B., Chikkatur, A., and Venkatesh, B. (2012). “Analysis of the costs and benefits of CO2sequestration on the US outer continental shelf.” US Department of the Interior, Bureau of Ocean Energy Management. Herndon, Virginia. OCS Study BOEM, 100.
Vilarrasa, V., Bolster, D., Olivella, S., and Carrera, J. (2010). “Coupled hydro-mechanical modeling of CO2sequestration in deep saline aquifers.” International Journal of Greenhouse Gas Control, 4(6), 910–919.
Witko, L., Peter, B. A., and Lewis, D. W. (1970). “Detrital sedimentary rock classification and nomenclature for use in New Zealand.” New Zealand Journal of Geology and Geophysics, 13, 937–968.
Yahya, A. A. et al. (2016). “Hanifa-Tuwaiq Mountain Zone: The Edge between Conventional and Unconventional Systems.” 12th Middle East Geosciences Conference and Exhibition, Manama, Bahrain, March 7–10, 2016. Bahrain.

Information & Authors

Information

Published In

Go to World Environmental and Water Resources Congress 2018
World Environmental and Water Resources Congress 2018: Groundwater, Sustainability, and Hydro-Climate/Climate Change
Pages: 1 - 13
Editor: Sri Kamojjala, Las Vegas Valley Water District
ISBN (Online): 978-0-7844-8141-7

History

Published online: May 31, 2018

Permissions

Request permissions for this article.

Authors

Affiliations

Sikandar Khan, Ph.D. [email protected]
Dept. of Mechanical Engineering, King Fahd Univ. of Petroleum and Minerals, Saudi Arabia (corresponding author). E-mail: [email protected]
Y. A. Khulief, Ph.D. [email protected]
Professor, Dept. of Mechanical Engineering, King Fahd Univ. of Petroleum and Minerals, Saudi Arabia. E-mail: [email protected]
A. A. Al-Shuhail, Ph.D. [email protected]
Associate Professor, Dept. of Geosciences, King Fahd Univ. of Petroleum and Minerals, Saudi Arabia. E-mail: [email protected]

Metrics & Citations

Metrics

Citations

Download citation

If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.

View Options

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Paper
$35.00
Add to cart
Buy E-book
$80.00
Add to cart

Get Access

Access content

Please select your options to get access

Log in/Register Log in via your institution (Shibboleth)
ASCE Members: Please log in to see member pricing

Purchase

Save for later Information on ASCE Library Cards
ASCE Library Cards let you download journal articles, proceedings papers, and available book chapters across the entire ASCE Library platform. ASCE Library Cards remain active for 24 months or until all downloads are used. Note: This content will be debited as one download at time of checkout.

Terms of Use: ASCE Library Cards are for individual, personal use only. Reselling, republishing, or forwarding the materials to libraries or reading rooms is prohibited.
ASCE Library Card (5 downloads)
$105.00
Add to cart
ASCE Library Card (20 downloads)
$280.00
Add to cart
Buy Single Paper
$35.00
Add to cart
Buy E-book
$80.00
Add to cart

Media

Figures

Other

Tables

Share

Share

Copy the content Link

Share with email

Email a colleague

Share