References

Abild, J., Andersen, E. Y., and Rosbjerg, L. (1992). “The Climate of Extreme Wind at the Great Belt, Denmark.” J. Wind Engrg. Industrial Aerodyn. 41(1–3): 521–532.

Aluminum Association. (1981). “Aluminum Construction Manual.” The Aluminum Association, Arlington, Va.

Aluminum Association. (2005). “Aluminum Design Manual, Including Specification for Aluminum Structures—Allowable Stress Design and Specification for Aluminum Structures—Load Resistance Factor Design,” The Aluminum Association, Arlington, Va.

American Concrete Institute (ACI) 318. (2005). “Building Code Requirements for Structural Concrete (with Commentary),” ACI Committee Publication No. 318–05, American Concrete Institute, Detroit, Mich.

ACI 349. (2001). “Code Requirements for Nuclear Safety Related Concrete Structures and Commentary.” Appendix B with Commentary, ACI Committee Publication No. 349–01, American Concrete Institute, Detroit, Mich.

ACI 355.1. (1997). “Report on Anchorage to Concrete,” ACI Committee 355.1, American Concrete Institute, Detroit, Mich.

ACI 440.1R. (2006). “Guide for the Design and Construction of Concrete Reinforced with FRP Bars.” American Concrete Institute, Detroit, Mich.

American Galvanizers Association. (1984). “Recommended Details for Galvanized Structures,” Aurora, Colo.

American Galvanizers Association. (2001). “The Design of Products To Be Hot Dip Galvanized after Fabrication,” Aurora, Colo.

American Institute of Steel Construction (AISC). (2003). “Manual of Steel Construction: Load and Resistance Factor Design, 3rd Ed., American Institute of Steel Construction, Chicago, Ill.

AISC. (2005). “ASD/LRFD Steel Construction Manual,” 13th Ed., American Institute of Steel Construction, Chicago, Ill.

American Institute of Timber Construction (AITC) 200. (2004). “Manufacturing Quality Control Systems Manual,” American Institute of Timber Construction, Englewood, Colo.

American National Standards Institute (ANSI)-O5.1. (2002). “American National Standard, Wood Poles—Specifications and Dimensions,” New York.

ANSI-O5.1c. (2004). “American National Standard, Wood Poles—Specifications and Dimensions,” Supplement to ANSI O5.1 (2002), New York.

American Society of Civil Engineers (ASCE). (1961). “Wind Forces on Structures,” Transactions, Vol. 126, Paper No. 3269, pp. 1124–1197.

ASCE. (1972). “Guide for the Design of Aluminum Transmission Towers,” J. Struct. Div. 98(ST12).

ASCE. (1987). “Guide for the Design and Use of Concrete Poles,” American Society of Civil Engineers, New York.

ASCE. (1997). “Wind Loads and Anchor Bolt Design for Petrochemical Facilities,” American Society of Civil Engineers, New York.

ASCE 7. (2005). “Minimum Design Loads for Buildings and Other Structures,” American Society of Civil Engineers, New York.

ASCE 10. (1997). “Design of Latticed Steel Transmission Structures,” American Society of Civil Engineers, Reston, Va.

ASCE 74. (1991). “Guidelines for Electrical Transmission Line Structural Loading,” American Society of Civil Engineers, Reston, Va.

ASCE 91. (1997). “Design of Guyed Electrical Transmission Structures,” American Society of Civil Engineers, New York.

ASCE-PCI. (1997). “Guide for the Design of Prestressed Concrete Poles,” PCI J., 24(6): 94–134.

ASCE/SEI 48. (2005). “Design of Steel Transmission Pole Structures,” American Society of Civil Engineers, Reston, Va.

American Society for Testing and Materials (ASTM) A36/A36M. (2005). “Standard Specification for Carbon Structural Steel,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM A53/A53M. (2006). “Standard Specification for Pipe, Steel, Black and Hot-Dipped Zinc-Coated, Welded and Seamless,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM A123/A123M. (2002). “Standard Specification for Zinc Coating (Hot-Dip Galvanized) on Iron and Steel Products,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM A153/A153M. (2005). “Standard Specification for Zinc (Hot-Dip) on Iron and Steel Hardware,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM A193/A193M. (2006). “Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM A242/A242M. (2004). “Standard Specification for High-Strength Low-Alloy Structural Steel,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM A307. (2004). “Standard Specification for Carbon Steel Bolts and Studs, 60,000 PSI Tensile Strength,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM A325. (2006). “Standard Specification for Structural Bolts, Steel, Treated, 120/105 ksi Minimum Tensile Strength,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM A325M. (2005). “Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric),” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM A394. (2005). “Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM A435/A435M-90. (2001). “Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM A449. (2004). “Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM A500. (2003). “Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM A572/A572M. (2006). “Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM A588/A588M. (2005). “Standard Specification for High-Strength Low-Alloy Structural Steel with 50 ksi [345 MPa] Minimum Yield Point to 4 in. [100 mm] Thick,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM A615/A615M. (2006). “Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM A706/A706M. (2006). “Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM A871/A871M. (2003). “Standard Specification for High Strength Low-Alloy Structural Steel Plate with Atmospheric Corrosion Resistance,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM B695. (2004). “Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM E164. (2003). “Standard Practice for Ultrasonic Contact Examination of Weldments,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM E165. (2002). “Standard Test Method for Liquid Penetrant Examination,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM E709. (2001). “Standard Guide for Magnetic Particle Examination,” American Society for Testing and Materials, West Conshohocken, Pa.

ASTM F1554. (2004). “Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength,” American Society for Testing and Materials, West Conshohocken, Pa.

American Welding Society (AWS) D1.1/D1.1M. (2006). “Structural Welding Code—Steel.” American Welding Society, Miami, Fl.

AWS D1.2/D1.2M. (2003). “Structural Welding Code—Aluminum.” American Welding Society, Miami, Fl.

Bayar, D. C. (1986). “Drag Coefficients of Latticed Towers,” J. Struct. Div., ASCE, 112(2), 9–167.

Beedle, L. S. (1958). Plastic Design of Steel Frames. John Wiley & Sons, New York.

Bleich, F. (1952). Buckling Strength of Metal Structures, 1st Ed., McGraw-Hill Book Co., New York.

Blodgett, O. W. (1966). “Design of Welded Structures.” The James F. Lincoln Arc Welding Foundation, Cleveland, Ohio.

British Electrical and Allied Industries Research Association (BEAIRA). (1935). “Wind Pressure on Latticed Towers—Tests on Models, Report (F/T 84),” J. Inst. Electrical Engrs. 77, 189–196.

Cook, R. D. (1974). Concepts and Applications of Finite Element Analysis, John Wiley & Sons, New York.

Davenport, A. G. (1979). “Gust Response Factors for Transmission Line Loading,” Proceedings of the Fifth International Conference of Wind Engineering, Pergamon Press, July, Fort Collins, Colo., 866–909.

Deaves, D. M., and Harris, R. I. (1978). “A Mathematical Model of the Structure of Strong Winds,” United Kingdom Construction Industry Research and Information Association, Report 76, London, England.

Federal Emergency Management Agency (FEMA) 450. (2004). “NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures.” 2003 Ed., Federal Emergency Management Agency, Building Seismic Safety Council, National Institute of Building Sciences, Washington, D.C.

Federal Specification TT-P-645B. (1990). “Primer, Paint, Zinc-Molybdate, Alkyd Type,” March, http://www.wbdg.org/ccb/FEDMIL/TT645b.pdf.

General Order 95. (2006). “State of California Rule for Overhead Electric Line Construction.” Public Utility Commission, Sacramento, Calif.

Gere, J. M., and Carter, W. O. (1962). “Critical Buckling Loads for Tapered Members,” J. Struct. Div., ASCE, 88(ST1), 1–11, Proc. Paper 3045.

Hoskings, J. R. M., and Wallis, J. R. (1987). “Parameters and Quantile Estimation for the Generalized Pareto Distribution,” Technometrics, 29(3): 339–349.

Institute of Electrical and Electronics Engineers (IEEE) C37.04a. (2003). “Standard Capacitance Current Switching Requirements for High Voltage Circuit Breakers,” The Institute of Electrical and Electronics Engineers, Piscataway, N.J.

IEEE C37.32. (2002). “American National Standard High-Voltage Air Disconnect Switches, Interrupter Switches, Fault Initiating Switches, Grounding Switches, Bus Supports, and Accessories Control Voltage Ranges—Schedules of Preferred Ratings, Construction Guidelines and Specifications,” The Institute of Electrical and Electronics Engineers, Piscataway, N.J.

IEEE C57.19.01. (2000). “Standard Performance Characteristics and Dimensions for Outdoor Apparatus Bushings,” The Institute of Electrical and Electronics Engineers, Piscataway, N.J.

IEEE C57.19.100. (1995). “Guide for Application of Power Apparatus Bushings,” The Institute of Electrical and Electronics Engineers, Piscataway, N.J.

IEEE C57.32. (2002). “American National Standard for Switchgear—High Voltage Air Switches, Bus Supports, and Switch Accessories—Schedules of Preferred Ratings Manufacturing Specifications, and Application Guide,” The Institute of Electrical and Electronics Engineers, Piscataway, N.J.

IEEE 605. (2006). “Guide for Design of Substation Rigid-Bus Structures,” Draft 10, The Institute of Electrical and Electronics Engineers, Piscataway, N.J.

IEEE 691. (2001). “Guide for Transmission Structure Foundation Design and Testing,” The Institute of Electrical and Electronics Engineers, Piscataway, N.J.

IEEE 693. (2005). “Recommended Practice for Seismic Design of Substations,” The Institute of Electrical and Electronics Engineers, Piscataway, N.J.

IEEE 751. (1991). “Trail-Use Design Guide for Wood Transmission Structures,” The Institute of Electrical and Electronics Engineers, Piscataway, N.J.

IEEE 1307. (2004). “Fall Protection of the Utility Industry,” The Institute of Electrical and Electronics Engineers, Piscataway, N.J.

IEEE 1527. (2006). “Recommended Practice for the Design of Flexible Buswork Located in Seismically Active Areas,” The Institute of Electrical and Electronics Engineers, Piscataway, N.J.

Jones, K. F. (1996a). “A Simple Model for Freezing Rain Load.” Proceedings, Seventh International Workshop on Atmospheric Icing of Structures, June, University of Quebec, 412–416. Chicoutimi, Quebec, Canada.

Jones, K. F. (1996b). “Ice Accretion in Freezing Rain,” CRREL Report 96–2, Cold Regions Research and Engineering Laboratory, Hanover, N.H.

Kissell, J. R., and Ferry, R. L. (1995). Aluminum Structures, A Guide to Their Specifications and Design, John Wiley & Sons, New York.

MacNeal, R. H., and Harder, R. C. (1985). “A Proposed Standard Set of Problems to Test Finite Element Accuracy, Finite Elements in Analysis and Design 1(1): 3–20, MSC Software Corporation, Santa Ana, Calif.

Mooers, J. D. (2006). “Aluminum Substation Structures,” Proceeding ASCE Electrical Transmission Line and Substation Structures Conference, Birmingham, Ala., 137–148.

Mueller, W. H., Ostendorp, M., and Kempner, L. (1991). “LIMIT: A Nonlinear Three Dimensional Truss Analysis Program,” Technical Research Report to Bonneville Power Administration, Portland, Oreg.

National Design Specification(NDS).(2005).“National Design Specification for Wood Construction,” American Forest and Paper Association, Washington, D.C.

National Electric Safety Code (NESC). (2007). “National Electric Safety Code (ANSI C2),” The Institute of Electrical and Electronics Engineers, Piscataway, N.J.

Norris, C. H., and Wilbur, J. B. (1960). Elementary Structural Analysis, 2nd Ed., McGraw-Hill Book Company, New York, 277.

PCI MNL-116. (1999). Manual for Quality Control for Plants and Production of Structural Precast Concrete Products, 4th Ed., Precast/Prestressed Concrete Institute, Chicago, Ill.

PCI MNL-120. (2004). Design Handbook, Precast and Prestressed Concrete, 6th Ed., Precast/Prestressed Concrete Institute, Chicago, Ill.

Peterka, J. A. (1992). “Improved Extreme Wind Prediction for the US,” J. Wind Engrg. Industrial Aerodyn. 41(1–3): 533–541.

Scruton, C. (1963). “On the Wind-Excited Oscillations of Stacks, Towers, and Masts,” Proceedings of the First International Conference on Wind Effects on Buildings and Structures, London, England, 798–837.

Wang, Q. J. (1991). “The POT Model Described by the Generalized Pareto Distribution with Poisson Arrival Rate,” J. of Hydrology, 129, 263–280.

White, D. W., and Hajjar, J. F. (1991). “Application of Second Order Elastic Analysis in LRFD: Research to Practice,” Engrg. J. 28(4), 133–148.