Framework for Modeling Lead in Premise Plumbing Systems Using EPANET
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Water Resources Planning and Management
Volume 146, Issue 12
Abstract
The lead contamination of drinking water in homes and buildings remains an important public health concern. In order to assess strategies to measure and reduce exposure to lead from drinking water, models are needed that incorporate the multiple factors affecting lead concentrations in premise plumbing systems (PPS). In this study, the use of EPANET, a commonly used hydraulic and water quality model for water distribution systems, was assessed for its ability to predict lead concentrations in PPS. The model was calibrated and validated against data collected from multiple experiments in the EPA’s Home Plumbing Simulator that contained a lead service line and other lead sources. The EPANET’s first-order saturation kinetics model was used to simulate the dissolution of lead in the lead service line. A version of EPANET was developed to include one-dimensional mass dispersion. Modeling results were compared to experimental data, and recommendations were made to improve the EPANET-based modeling framework for predicting lead concentrations in PPS.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Data associated with this work is available from https://catalog.data.gov/dataset/epa-sciencehub. Please contact the corresponding author for any additional model or data needs.
Acknowledgments
The authors acknowledge John Minor, Lew Rossman, Christy Muhlen, Daniel Williams, Christopher Parrett, Levi Haupert, Kelly Cahalan, Casey Formal, Matthew Staudinger, Maily Pham, and Eugenia Riddick for their efforts in operating the HPS, collecting and analyzing data, and/or general discussion that supported this effort.
Disclaimer
The US Environmental Protection Agency (EPA) through its Office of Research and Development funded the research described in this study. It has been subjected to the Agency’s review and has been approved for publication. Note that approval does not signify that the contents necessarily reflect the views of the Agency. Any mention of trade names, products, or services does not imply an endorsement by the US Government or EPA. The EPA does not endorse any commercial products, services, or enterprises. The contractors’ role did not include establishing Agency policy.
References
Abokifa, A. A., and P. Biswas. 2017. “Modeling soluble and particulate lead release into drinking water from full and partially replaced lead service lines.” Environ. Sci. Technol. 51 (6): 3318–3326. https://doi.org/10.1021/acs.est.6b04994.
Abokifa, A. A., Y. J. Yang, C. S. Lo, and P. Biswas. 2016. “Water quality modeling in the dead end sections of drinking water distribution networks.” Water Res. 89 (Feb): 107–117. https://doi.org/10.1016/j.watres.2015.11.025.
Bailey, R. J., and P. F. Russel. 1981. “Predicting drinking water lead levels.” Environ. Technol. Letters 2 (2): 57–66. https://doi.org/10.1080/09593338109384023.
Basha, H. A., and L. N. Malaeb. 2007. “Eulerian-Lagrangian method for constituent transport in water distribution networks.” J. Hydraul. Eng. 133 (10): 1155–1166. https://doi.org/10.1061/(ASCE)0733-9429(2007)133:10(1155).
Buchberger, S. G., J. T. Carter, Y. H. Lee, and T. G. Schade. 2003. Random demands, travel times, and water quality in deadends.. Denver: American Water Works Association Research Foundation.
Buchberger, S. G., and G. J. Wells. 1996. “Intensity, duration and frequency of residential water demands.” J. Water Resour. Plann. Manage. 122 (1): 11–19. https://doi.org/10.1061/(ASCE)0733-9496(1996)122:1(11).
Cahalan, K., and D. Lytle. 2017. “A simulated household plumbing system to understand water quality and corrosion.” In Proc., Annual Conf. and Exposition. Denver: American Water Works Association.
Cardew, P. T. 2006. “Development of a convective diffusion model for lead pipe rigs operating in laminar flow.” Water Res. 40 (Jun): 2190–2200. https://doi.org/10.1016/j.watres.2006.03.024.
Chowdhury, S., F. Kabir, M. A. J. Mazumder, and M. H. Zahir. 2018. “Modeling lead concentration in drinking water of residential plumbing pipes and hot water tanks.” Sci. Total Environ. 635 (Sep): 35–44. https://doi.org/10.1016/j.scitotenv.2018.04.065.
Cutter, M. R. 2004. “Dispersion in steady pipe flow with Reynolds number under 10,000.” M.S. thesis, Dept. of Civil and Environmental Engineering, Univ. of Cincinnati.
Del Toral, M. A., A. Porter, and M. R. Schock. 2013. “Detection and evaluation of elevated lead release from service lines: A field study.” Environ. Sci. Technol. 47 (16): 9300–9307. https://doi.org/10.1021/es4003636.
Flint, L. F., and P. Eisenklam. 1969. “Longitudinal gas dispersion in transitional and turbulent flow through a straight tube.” Can. J. Chem. Eng. 47 (2): 22–25. https://doi.org/10.1002/cjce.5450470201.
Fowler, F. C., and G. G. Brown. 1943. Contamination by successive flow in pipe lines. New York: American Institute of Chemical Engineers.
Gajbhiye, B. D., H. A. Kulharni, S. S. Tiwari, and C. S. Mathpati. 2019. “Teaching turbulent flow through pipe fittings using computational fluid dynamics approach.” Eng. Rep. 2 (1): e12093. https://doi.org/10.1002/eng2.12093.
Gill, W. N., and R. Sankarasubramanian. 1970. “Exact analysis of unsteady convective diffusion.” Proc. R. Soc. London, Ser. A 316 (1526): 341–350. https://doi.org/10.1098/rspa.1970.0083.
Grayman, W. M., and S. G. Buchberger. 2006. “Fixture-level human exposure calculation model.” In Proc., 8th Annual Water Distribution Systems Analysis Symp. Reston, VA: ASCE.
Grayman, W. M., S. G. Buchberger, and W. B. Samuels. 2008. “Hydraulic models of buildings for use in contamination studies.” In Proc., Water Distribution System Analysis Conf. Reston, VA: ASCE. https://doi.org/10.1061/9780784410240.
Hayes, C. R. 2009. “Computational modelling to investigate the sampling of lead in drinking water.” Water Res. 43 (Jun): 2647–2656. https://doi.org/10.1016/j.watres.2009.03.023.
Hayes, C. R., T. N. Croft, J. A. Campbell, I. P. Douglas, P. J. Gadoury, and M. R. Schock. 2013. “Optimization of corrosion control for lead in drinking water using computational modeling techniques.” J. NEWWA 232–249.
Hayes, C. R., T. N. Croft, J. A. Campbell, I. P. Douglas, P. J. Gadoury, and M. R. Shock. 2014. “Computational modelling techniques in the optimization of corrosion control for reducing lead in Canadian drinking water.” Water Qual. Res. J. Can. 49 (1): 82–93. https://doi.org/10.2166/wqrjc.2013.009.
Klise, K., D. Hart, D. Moriarty, M. Bynum, and R. Murray. 2017. Water network tool for resilience (WNTR) user manual. Washington, DC: USEPA Office of Research and Development.
Kuch, A., and I. Wagner. 1983. “A mass transfer model to describe lead concentrations in drinking water.” Water Res. 17 (10): 1303–1307. https://doi.org/10.1016/0043-1354(83)90256-7.
Lee, Y.-H. 2004. “Mass dispersion in intermittent laminar flow.” Ph.D. dissertation, Dept. of Civil and Environmental Engineering, Univ. of Cincinnati.
Mazumder, Q. H. 2012. “CFD analysis of the effect of elbow radius on pressure drop in multiphase flow.” Modell. Simul. Eng. 2012: 1. https://doi.org/10.1155/2012/125405.
Omaghomi, T. 2019. “Estimating peak water demand in buildings with efficient fixtures: Methods, merits, and implications.” Ph.D. dissertation, Dept. of Chemical and Environmental Engineering, Univ. of Cincinnati.
Rossman, L. 2000. EPANET 2: Users manual. Washington, DC: USEPA.
Samuels, W. B., R. Bahadur, W. M. Grayman, and R. P. Borja. 2010. “Guidelines for the prevention of contamination of drinking water in buildings and large venues.” In Handbook of science and technology for homeland security. Hoboken, NJ: Wiley.
Taylor, G. I. 1953. “Dispersion of soluble matter in solvent flowing slowly through a tube.” Proc. R. Soc. London, Ser. A 219 (1137): 186–203. https://doi.org/10.1098/rspa.1953.0139.
Taylor, G. I. 1954. “The dispersion of matter in turbulent flow through a pipe.” Proc. R. Soc. London, Ser. A 223 (1155): 446–468. https://doi.org/10.1098/rspa.1954.0130.
Triantafyllidou, S., and M. Edwards. 2012. “Lead (Pb) in tap water and in blood: Implications for lead exposure in the United States.” Crit. Rev. Environ. Sci. Technol. 42 (13): 1297–1352. https://doi.org/10.1080/10643389.2011.556556.
Triantafyllidou, S., M. R. Schock, M. K. DeSantis, and C. White. 2015. “Low contribution of -coated lead service lines to water lead contamination at the tap.” Environ. Sci. Technol. 49 (6): 3746–3754. https://doi.org/10.1021/es505886h.
Tzatchkov, V. G., A. A. Aldama, F. I. Arreguín, S. G. Buchberger, and Y.-H. Lee. 2001. “Advection-dispersion transport in water distribution with intermittent flow.” WIT Trans. Ecol. Environ. 48: 217–226.
USEPA. 1991. “Amendment to the safe drinking water act: Maximum contaminant level goals and national primary drinking water regulations for lead and copper.” Fed. Regist. 46 (110): 26460–26564.
USEPA. 1994. Method 200.8: Determination of trace elements in waters and wastes by inductively coupled plasma—Mass spectrometry, revision 5.4. Cincinnati: Environmental Monitoring Systems Laboratory, Office of Research and Development.
USEPA. 2017. “Proposed amendment to safe drinking water act: Use of lead free pipes, fittings, fixtures, solder and flux for drinking water.” Accessed January 1, 2017. https://www.federalregister.gov/documents/2017/01/17/2017-00743/use-of-lead-free-pipes-fittings-fixtures-solder-and-flux-for-drinking-water.
USEPA. 2019. “EPANET.” Accessed February 1, 2020. https://www.epa.gov/water-research/epanet.
Van der Leer, D., N. P. Weatherhill, R. J. Sharp, and C. R. Hayes. 2002. “Modelling the diffusion of lead into drinking water.” Appl. Math. Modell. 26 (6): 681–699. https://doi.org/10.1016/S0307-904X(01)00077-4.
Woo, H., J. Burkhardt, L. Rossman, J. Mason, and R. Murray. 2018. “Modeling of dispersion effect for intermittent flow in premise plumbing systems.” In Water distribution system analysis and computing and control for the water industry. Kingston, ON, Canada: Queen’s Univ.
Zughbi, H. D., Z. H. Khokhar, and R. N. Sharma. 2003. “Mixing in pipelines with side and opposed tees.” Ind. Eng. Chem. Res. 42 (21): 5333–5344. https://doi.org/10.1021/ie0209935.
Information & Authors
Information
Published In
Copyright
© 2020 Published by American Society of Civil Engineers.
History
Received: Feb 3, 2020
Accepted: Jul 2, 2020
Published online: Sep 30, 2020
Published in print: Dec 1, 2020
Discussion open until: Feb 28, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.