Closure to “Experimental Evaluation and Numerical Modeling of Wide-Flange Steel Columns Subjected to Constant and Variable Axial Load Coupled with Lateral Drift Demands” by Julien Cravero, Ahmed Elkady, and Dimitrios G. Lignos
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Structural Engineering
Volume 147, Issue 3
ST.1943-541X.0002945/asset/d435b374-ce6c-4695-b918-7baa6cab50a7/assets/(asce)st.1943-541x.0002945.fp.png)
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS. 2009. User’s manual, version 6.14. Providence, RI: Dassault Systèmes Simulia Corp.
AISC. 2016. Specification for structural steel buildings. Chicago: AISC.
Armstrong, P. J., and C. O. Frederick. 1966. “A mathematical representation of the multiaxial Bauschinger effect.” Mater. High Temp. 24 (1): 1–26. https://doi.org/10.1179/096034007X207589.
Bathe, K. J. 2019. Finite element procedures. 2nd ed. Upper Saddle River, NJ: Prentice Hall.
Belytschko, T. 1974. “Transient analysis (computer programs and algorithms).” In Structural mechanics computer programs: Surveys, assessments, and availability, 255–276. Charlottesville, VA: University Press of Virginia.
Belytschko, T., W. K. Liu, B. Moran, and K. I. Elkhodary. 2014. Nonlinear finite elements for continua and structures. 2nd ed. New York: Wiley.
Chaboche, J. L. 1989. “Constitutive equations for cyclic plasticity and cyclic viscoplasticity.” Int. J. Plast. 5 (3): 247–302. https://doi.org/10.1016/0749-6419(89)90015-6.
Cheng, X., Y. Chen, and D. A. Nethercot. 2013. “Experimental study on H-shaped steel beam-columns with large width-thickness ratios under cyclic bending about weak-axis.” Eng. Struct. 49 (Apr): 264–274. https://doi.org/10.1016/j.engstruct.2012.10.035.
Cheng, X., Y. Chen, L. Niu, and D. A. Nethercot. 2018. “Experimental study on H-section steel beam-columns under cyclic biaxial bending considering the effect of local buckling.” Eng. Struct. 174 (Nov): 826–839. https://doi.org/10.1016/j.engstruct.2018.08.001.
Cravero, J., A. Elkady, and D. G. Lignos. 2020. “Experimental evaluation and numerical modeling of wide-flange steel columns subjected to constant and variable axial load coupled with lateral drift demands.” J. Struct. Eng. 146 (3): 04019222. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002499.
de Castro e Sousa, A., Y. Suzuki, and D. Lignos. 2020. “Consistency in solving the inverse problem of the Voce–Chaboche constitutive model for plastic straining.” J. Eng. Mech. 146 (9): 04020097. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001839.
El Jisr, H., A. Elkady, and D. G. Lignos. 2020. “Hysteretic behavior of moment-resisting frames considering slab restraint and framing action.” J. Struct. Eng. 146 (8): 04020145. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002696.
Elkady, A., and D. G. Lignos. 2015. “Analytical investigation of the cyclic behavior and plastic hinge formation in deep wide-flange steel beam-columns.” Bull. Earthquake Eng. 13 (4): 1097–1118. https://doi.org/10.1007/s10518-014-9640-y.
Elkady, A., and D. G. Lignos. 2018a. “Full-scale testing of deep wide-flange steel columns under multi-axis cyclic loading: Loading sequence, boundary effects and out-of-plane brace force demands.” J. Struct. Eng. 144 (2): 04017189. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001937.
Elkady, A., and D. G. Lignos. 2018b. “Improved seismic design and nonlinear modeling recommendations for wide-flange steel columns.” J. Struct. Eng. 144 (9): 04018162. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002166.
Fell, B. V., A. M. Kanvinde, G. G. Deierlein, and A. T. Myers. 2009. “Experimental investigation of inelastic cyclic buckling and fracture of steel braces.” J. Struct. Eng. 135 (1): 19–32. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:1(19).
Galambos, T. V. 1998. Technical memoranda of Structural Stability Research Council. New York: Wiley.
Haufe, A., K. Schweizerhof, and P. DuBois. 2013. “Properties & limits: Review of shell element formulations.” In Proc., 2013 LS-Dyna Developer Forum. Stuttgart, Germany: DYNAmore GmbH.
Jim, D., H. Philip, and D. B. Paul. 2014. “Finite element analysis, predictive engineering.” In LS-DYNA analysis for structural mechanics. Portland, OR: PredictiveEngineering.
Lamarche, C. P., and R. Tremblay. 2011. “Seismically induced cyclic buckling of steel columns including residual-stress and strain-rate effects.” J. Constr. Steel Res. 67 (9): 1401–1410. https://doi.org/10.1016/j.jcsr.2010.10.008.
LS-DYNA. 2017. Theory manual. Livermore, CA: Livermore Software Technology.
Maheo, L., G. Rio, and V. Grolleau. 2011. “On the use of some numerical damping methods of spurious oscillations in the case of elastic wave propagation.” Mech. Res. Commun. 38 (2): 81–88. https://doi.org/10.1016/j.mechrescom.2011.01.006.
Newell, J. D., and C. M. Uang. 2008. “Cyclic behavior of steel wide-flange columns subjected to large drift.” J. Struct. Eng. 134 (8): 1334–1342. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:8(1334).
NIST-ATC. 2018. “Atc-106-1 beam column blind prediction contest.” Accessed September 22, 2018. https://www.atcouncil.org/atc-106-blind-contest.
Ozkula, G., J. Harris, and C. M. Uang. 2017. “Observations from cyclic tests on deep, wide-flange beam-columns.” AISC Eng. J. 54 (1): 45–61.
Rackauskaite, E., P. Kotsovinos, and G. Rein. 2017. “Model parameter sensitivity and benchmarking of the explicit dynamic solver of LS-DYNA for structural analysis in case of fire.” Fire Saf. J. 90 (Jun): 123–138. https://doi.org/10.1016/j.firesaf.2017.03.002.
Rust, W., and K. Schweizerhof. 2003. “Finite element limit load analysis of thin-walled structures by ANSYS (implicit), LS-DYNA (explicit) and in combination.” Thin-Walled Struct. 41 (2–3): 227–244. https://doi.org/10.1016/S0263-8231(02)00089-7.
Sousa, A. A., and D. G. Lignos. 2017. Residual stress measurements of European hot-rolled I-shaped steel profiles. Lausanne, Switzerland: Ecole Polytechnique Federale de Lausanne.
Suzuki, Y., and D. G. Lignos. 2015. “Large scale collapse experiments of wide-flange steel beam-columns.” In Proc., 8th Int. Conf. on Behavior of Steel Structures in Seismic Areas. Shanghai: Tongji Univ.
Trahair, N. S. 1993. Flexural-torsional buckling of structures. Boca Raton, FL: CRC Press.
Voce, E. 1948. “The relationship between stress and strain for homogeneous deformation.” J. Inst. Met. 74 (1): 537–562.
Ziemian, R. D., A. J. C. Denavit, and T. J. L. Denavit. 2018. “Three-dimensional benchmark problems for design by advanced analysis: Impact of twist.” J. Struct. Eng. 144 (12): 04018220. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002224.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 147 • Issue 3 • March 2021
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Sep 4, 2020
Accepted: Oct 12, 2020
Published online: Dec 26, 2020
Published in print: Mar 1, 2021
Discussion open until: May 26, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.