Abstract
This paper explains the use of practical methods and records of input motion in the investigation of vibration effects on structural subsystems (such as floors) and components. Six example cases are presented in which the analysis of vibration resulted in appropriate intervention methods for controlling vibration and abating its damaging effects. Each case demanded a different level of serviceability, for which remedial measures had to be implemented to meet the particular serviceability demand. Cases 1 and 2 each concerned vibrations induced in a floor system as a result of occupants’ exercise activities. Suggested solutions included doing nothing, implementing simple alterations and control of the activities, or relocating the exercise area. Case 3 involved vibrations in balconies in a church assembly area. The suggested solution in this case involved design of a dynamic absorber with an optimum installation location to alleviate the vibration effect. Case 4 dealt with the vibration of a floor system caused by operating commercial washing machines. The suggested solution included the installation of vibration isolators and absorbers and/or implementing structural retrofit to increase floor stiffness. Case 5, vibration in a hospital surgery room, and Case 6, vibration in a portable classroom, involved detailed data gathering and identification of the sources of vibration. The suggested solutions included controlling the source of vibration (in Case 5) and simple alterations of the floor of the portable classroom to change the mass and the frequency of vibration (in Case 6). The paper also summarizes (1) sources of vibrations that may affect structures, a brief overview of the damaging effects of each vibration type, and methods to mitigate these effects; and (2) general information on the frequency contents of vibrations from human activities and the threshold levels for structures of different construction types and usage, including those supporting sensitive equipment.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
References
Allen, D. E. 1990a. “Building vibrations from human activities.” Concr. Int. 12 (6): 66–73.
Allen, D. E. 1990b. “Floor vibrations from aerobics.” Can. J. Civ. Eng. 17 (5): 771–787. https://doi.org/10.1139/l90-090.
Allen, D. E., and G. Pernica. 1998. Control of floor vibration. Ottawa: Institute for Research in Construction, National Research Council of Canada.
ANSI (American National Standards Institute). 2012. Guide to the evaluation of human exposure to vibration in buildings. Washington, DC: American National Standards Institute.
Bachmann, H. 1992. “Case studies of structures with man-induced vibrations.” J. Struct. Eng. 118 (3): 631–647. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:3(631).
Bachmann, H., and W. Amman. 1987. Vibrations in structures induced by man and machines. Zurich, Switzerland: International Association for Bridge and Structural Engineering, ETH-Honggerberg.
Jaafari, C., and J. Mohammadi. 2018. “Floor vibration control as a serviceability requirement in design standards and practices: Review.” Pract. Period. Struct. Des. Constr. 23 (20): 04018003. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000361.
Longinow, A., H. S. Limaye, and R. L. Eshleman. 1989. “Retrofitting vibrating machinery installation.” In Vol. 2 of Proc., 60th Shock and Vibration Symp., edited by H. C. Pusey, 107–114. Bethesda, MD: David Taylor Research Center.
Lovholt, F., K. Rothschild, C. Madshus, and K. Tronstad. 2009. “Building vibration generated by low frequency sound from blasts and Aircrafts.” In Proc., INTER-NOISE and NOISE-CON Congress and Conf. Proc., 58–66. Reston, VA: Institute of Noise Control Engineering.
Mohammadi, J., A. Longinow, D. K. Johnson, and N. R. Iwankiw. 2022. “Non-destructive evaluation (NDE) and monitoring methods for façade inspection and conditions assessment.” Pract. Period. Struct. Des. Constr. 27 (3): 04022029. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000712.
Murray, T. M., D. E. Allen, and E. E. Ungar. 2003. Design guide 11: Floor vibrations due to human activities. Chicago: AISC.
Saidi, I., N. Haritos, E. F. Gad, and J. L. Wilson. 2006. “Floor vibrations due to human excitation—Damping perspective.” In Proc., Earthquake Engineering in Australia, 257–264. Ballarat, VIC, Australia: Australian Earthquake Engineering Society.
Varela, W. D., and R. C. Battista. 2011. “Control of vibrations induced by people walking on large span composite floor decks.” Eng. Struct. 33 (9): 2485–2494. https://doi.org/10.1016/j.engstruct.2011.04.021.
Information & Authors
Information
Published In
Practice Periodical on Structural Design and Construction
Volume 27 • Issue 4 • November 2022
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Apr 17, 2022
Accepted: Jun 12, 2022
Published online: Sep 6, 2022
Published in print: Nov 1, 2022
Discussion open until: Feb 6, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.