Experimental Study and Mechanism Analysis of the Shear Dynamic Performance of Basalt Fiber–Reinforced Concrete
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 1
Abstract
Basalt fiber (BF) has been proven to play a positive role in strengthening the toughness of concrete. At present, there are many studies that investigate its compressive and tensile behavior. However, concrete is often subjected to shear action in practical engineering. In order to explore the shear dynamic performance of BF reinforced concrete (BFRC), a systematic direct shear dynamic performance experiment was carried out using BFRC specimens with four different fiber lengths and four different fiber contents while considering the influence of earthquake magnitude strain rate. The experimental results showed that BFRC had an obvious strain rate effect, and the increase in strain rate significantly increased the shear stress of BFRC. As either the BF content or length increased, the concrete shear dynamic increase factor first exhibited an increasing trend followed by a decreasing trend. Based on the comprehensive analysis of static and dynamic data, the shear stress and dynamic increase factor of BFRC reached the maximum values at the fiber content of 0.2% and BF length of 6 mm, and the corresponding shear stress and dynamic increase factor were 10.48 MPa and 1.29, respectively. According to the general trend analysis, the plastic deformation capacity of BFRC was gradually improved with the increase of BF content and length. Meanwhile, scanning electron microscopy (SEM) and computerized tomography (CT) technology were used to systematically analyze the stress mechanism of BFRC from the microscopic point of view. Overall, this study provided a theoretical basis for the application and development of BF in concrete.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This research was financially supported by the National Natural Science Foundation of China (Grant No. 51969026), the Natural Science Foundation of Qinghai Province in China (Grant No. 2021-SF-154), and the program “Study on crack mechanism and crack prevention technology of concrete face slab of Nuomuhong Face Rockfill Dam.” The authors sincerely appreciate the reviewers’ insightful and valuable comments and the teammates who make considerable efforts in various way.
References
Algin, Z., and M. Ozen. 2018. “The properties of chopped basalt fibre reinforced self-compacting concrete.” Constr. Build. Mater. 186 (Oct): 678–685. https://doi.org/10.1016/j.conbuildmat.2018.07.089.
Arslan, M. 2016. “Effects of basalt and glass chopped fibers addition on fracture energy and mechanical properties of ordinary concrete: CMOD measurement.” Constr. Build. Mater. 114 (Jul): 383–391. https://doi.org/10.1016/j.conbuildmat.2016.03.176.
Bai, Y., Z. Yan, J. Jia, T. Ozbakkaloglu, and Y. Liu. 2021. “Dynamic compressive behavior of concrete confined with unidirectional natural flax FRP based on SHPB tests.” Compos. Struct. 259 (Mar): 113233. https://doi.org/10.1016/j.compstruct.2020.113233.
Branston, J., S. Das, S. Kenno, and C. Taylor. 2016. “Influence of basalt fibres on free and restrained plastic shrinkage.” Cem. Concr. Compos. 74 (Nov): 182–190. https://doi.org/10.1016/j.cemconcomp.2016.10.004.
CECS (China Association for Engineering Construction Standardization). 2010. Standard for test methods of fibrous concrete. CECS13:2009. Beijing: China Planning Press.
Chen, L., C. Yue, Y. Zhou, J. Zhang, X. Jiang, and Q. Fang. 2021. “Experimental and mesoscopic study of dynamic tensile properties of concrete using direct-tension technique.” Int. J. Impact Eng. 155 (Sep): 103895. https://doi.org/10.1016/j.ijimpeng.2021.103895.
Chen, X., S. Wu, and J. Zhou. 2013. “Experimental and modeling study of dynamic mechanical properties of cement paste, mortar and concrete.” Constr. Build. Mater. 47 (Oct): 419–430. https://doi.org/10.1016/j.conbuildmat.2013.05.063.
China National Standards. 2019. Standard for test methods of concrete physical and mechanical properties. GB/T 50081-2019. Beijing: China Architecture and Building Press.
CNS (China National Standards). 2011. Specification for mix proportion design of ordinary concrete. JGJ 55-2011. Beijing: China Architecture and Building Press.
Dias, D., and C. Thaumaturgo. 2005. “Fracture toughness of geopolymeric concretes reinforced with basalt fibers.” Cem. Concr. Compos. 27 (1): 49–54. https://doi.org/10.1016/j.cemconcomp.2004.02.044.
Fu, Q., D. Niu, J. Zhang, D. Huang, and M. Hong. 2018a. “Impact response of concrete reinforced with hybrid basalt-polypropylene fibers.” Powder Technol. 326 (Feb): 411–424. https://doi.org/10.1016/j.powtec.2017.12.022.
Fu, Q., D. Niu, J. Zhang, D. Huang, Y. Wang, M. Hong, and L. Zhang. 2018b. “Dynamic compressive mechanical behaviour and modelling of basalt–polypropylene fibre-reinforced concrete.” Arch. Civ. Mech. Eng. 18 (3): 914–927. https://doi.org/10.1016/j.acme.2018.01.016.
Guo, Y., G. Gao, L. Jing, and V. P. W. Shim. 2019. “Quasi-static and dynamic splitting of high-strength concretes—Tensile stress–strain response and effects of strain rate.” Int. J. Impact Eng. 125 (Mar): 188–211. https://doi.org/10.1016/j.ijimpeng.2018.11.012.
Guo, Z. 1997. Strength and deformation of concrete: Experimental foundation and constitutive relationship, 104–105. [In Chinese.] Beijing: Tsinghua University Press.
Huang, Z., L. Sui, F. Wang, S. Du, Y. Zhou, and J. Ye. 2020. “Dynamic compressive behavior of a novel ultra-lightweight cement composite incorporated with rubber powder.” Compos. Struct. 244 (Jul): 112300. https://doi.org/10.1016/j.compstruct.2020.112300.
Jiang, C., K. Fan, F. Wu, and D. Chen. 2014. “Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete.” Mater. Des. 58 (Jun): 187–193. https://doi.org/10.1016/j.matdes.2014.01.056.
Kabay, N. 2014. “Abrasion resistance and fracture energy of concretes with basalt fiber.” Constr. Build. Mater. 50: 95–101. https://doi.org/10.1016/j.conbuildmat.2013.09.040.
Pirmohammad, S., B. Amani, and Y. M. Shokorlou. 2020. “The effect of basalt fibres on fracture toughness of asphalt mixture.” Fatigue Fract. Eng. Mater. Struct. 43 (7): 1446–1460. https://doi.org/10.1111/ffe.13207.
Shang, S., and Y. Song. 2013. “Dynamic biaxial tensile–compressive strength and failure criterion of plain concrete.” Constr. Build. Mater. 40 (Mar): 322–329. https://doi.org/10.1016/j.conbuildmat.2012.11.012.
Shi, L., L. Wang, Y. Song, and L. Shen. 2014. “Dynamic multiaxial strength and failure criterion of dam concrete.” Constr. Build. Mater. 66 (Sep): 181–191. https://doi.org/10.1016/j.conbuildmat.2014.05.076.
Sica, S., L. Pagano, and F. Rotili. 2019. “Rapid drawdown on earth dam stability after a strong earthquake.” Comput. Geotech. 116 (Dec): 103187. https://doi.org/10.1016/j.compgeo.2019.103187.
Sim, J., C. Park, and D. Moon. 2005. “Characteristics of basalt fiber as a strengthening material for concrete structures.” Composites, Part B 36 (6–7): 504–512. https://doi.org/10.1016/j.compositesb.2005.02.002.
Sukhoon, P., E. T. Sherif, and E. N. Antoine. 2016. “Direct tensile behavior of ultra high performance fiber reinforced concrete (UHP-FRC) at high strain rates.” Cem. Concr. Res. 88 (Oct): 144–156. https://doi.org/10.1016/j.cemconres.2016.07.003.
Sun, X., Z. Gao, P. Cao, and C. Zhou. 2019a. “Mechanical properties tests and multiscale numerical simulations for basalt fiber reinforced concrete.” Constr. Build. Mater. 202 (Mar): 58–72. https://doi.org/10.1016/j.conbuildmat.2019.01.018.
Sun, X., Z. Gao, P. Cao, C. Zhou, Y. Ling, X. Wang, Y. Zhao, and M. Diao. 2019b. “Fracture performance and numerical simulation of basalt fiber concrete using three-point bending test on notched beam.” Constr. Build. Mater. 225 (Nov): 788–800. https://doi.org/10.1016/j.conbuildmat.2019.07.244.
Sun, X., K. Zhao, Y. Li, R. Huang, Z. Ye, Y. Zhang, and J. Ma. 2018. “A study of strain-rate effect and fiber reinforcement effect on dynamic behavior of steel fiber-reinforced concrete.” Constr. Build. Mater. 158 (Jan): 657–669. https://doi.org/10.1016/j.conbuildmat.2017.09.093.
Taha, A., W. Alnahhal, and N. Alnuaimi. 2020. “Bond durability of basalt FRP bars to fiber reinforced concrete in a saline environment.” Compos. Struct. 243 (Jul): 112277. https://doi.org/10.1016/j.compstruct.2020.112277.
Wang, G., S. Zhang, Y. Kong, and H. Li. 2015. “Comparative study of the dynamic response of concrete gravity dams subjected to underwater and air explosions.” J. Perform. Constr. Facil. 29 (4): 04014092. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000589.
Wang, X., S. Zhang, C. Wang, W. Cui, K. Cao, and X. Fang. 2020. “Blast-induced damage and evaluation method of concrete gravity dam subjected to near-field underwater explosion.” Eng. Struct. 209 (Apr): 109996. https://doi.org/10.1016/j.engstruct.2019.109996.
Waseem, S. A., and B. Singh. 2016. “Shear transfer strength of normal and high-strength recycled aggregate concrete—An experimental investigation.” Constr. Build. Mater. 125 (Oct): 29–40. https://doi.org/10.1016/j.conbuildmat.2016.08.022.
Williams, B., Q. Sun, W. Heard, C. Loeffler, S. Graham, G. Vankirk, and X. Nie. 2021. “Investigation of strain-rate and pressure effects for high-strength concrete using a novel large-diameter triaxial Kolsky bar technique.” Cem. Concr. Compos. 121 (Aug): 104085. https://doi.org/10.1016/j.cemconcomp.2021.104085.
Xiao, J., K. Zhang, and Q. Zhang. 2021. “Strain rate effect on compressive stress–strain curves of recycled aggregate concrete with seawater and sea sand.” Constr. Build. Mater. 300 (Sep): 124014. https://doi.org/10.1016/j.conbuildmat.2021.124014.
Yan, D., and G. Lin. 2006. “Dynamic properties of concrete in direct tension.” Cem. Concr. Res. 36 (7): 1371–1378. https://doi.org/10.1016/j.cemconres.2006.03.003.
Yang, L., H. Xie, S. Fang, C. Huang, A. Yang, and Y. Chao. 2021. “Experimental study on mechanical properties and damage mechanism of basalt fiber reinforced concrete under uniaxial compression.” In Vol. 31 of Structures, 330–340. Amsterdam, Netherlands: Elsevier. https://doi.org/10.1016/j.istruc.2021.01.071.
Yu, Z., Q. Huang, X. Xie, and N. Xiao. 2018. “Experimental study and failure criterion analysis of plain concrete under combined compression-shear stress.” Constr. Build. Mater. 179 (Aug): 198–206. https://doi.org/10.1016/j.conbuildmat.2018.05.242.
Yu, Z., R. Tang, F. Li, Y. Hu, G. Liu, Y. Qin, and Q. Huang. 2021a. “Experimental study and failure criterion analysis on combined compression-shear performance of rubber concrete (RC) with different rubber replacement ratio.” Constr. Build. Mater. 288 (Jun): 123105. https://doi.org/10.1016/j.conbuildmat.2021.123105.
Yu, Z., R. Tang, G. Liu, Z. Guo, and Q. Huang. 2021b. “Experimental study on dynamic performance of plain concrete and lightweight aggregate concrete under uniaxial loading.” J. Mater. Civ. Eng. 33 (9): 04021217. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003846.
Zhang, H., B. Wang, A. Xie, and Y. Qi. 2017. “Experimental study on dynamic mechanical properties and constitutive model of basalt fiber reinforced concrete.” Constr. Build. Mater. 152 (Oct): 154–167. https://doi.org/10.1016/j.conbuildmat.2017.06.177.
Zhang, J., Y. Zhu, J. Zhao, Z. Fu, and L. Wu. 2011. “Experimental research for scour resistance of basalt and carbon fiber hydraulic concrete.” Appl. Mech. Mater. 90–93: 2607–2611. https://doi.org/10.4028/www.scientific.net/AMM.90-93.2607.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Dec 1, 2021
Accepted: May 5, 2022
Published online: Oct 26, 2022
Published in print: Jan 1, 2023
Discussion open until: Mar 26, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Zhenpeng Yu, Qi Yang, Rui Tang, Yongyi Wu, Qiao Huang, Experimental Study and Mechanism Analysis of the Dynamic Performance of Plain Concrete under Combined Compression and Shear, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-14179, 36, 8, (2024).