Preparation of Low-Temperature Phase Change Materials Microcapsules and Its Application to Asphalt Pavement
This article has been corrected.
VIEW CORRECTIONPublication: Journal of Materials in Civil Engineering
Volume 30, Issue 11
Abstract
Asphalt pavement cracks easily in low-temperature environments. In order to address the problem, phase-change material (PCM) microcapsules working at 0–10°C are used to replace some of the aggregates in asphalt. In this study, PCM microcapsules with a high-temperature epoxy resin adhesive as reinforcement phase were prepared by using -tetradecane/tetradecanol as the core material and melamine-urea-formaldehyde as the wall material. The reinforced PCM microcapsules were blended into the asphalt modified by styrene-butadiene-styrene block copolymer (SBS) modified asphalt, the PCM microcapsules were used to replace part of the same amount of the coarse aggregate. The results depict that the reinforced PCM microcapsules can satisfy the requirements of both immersion Marshall test and freeze-thaw splitting test. Above all, asphalt mixtures containing reinforced PCM microcapsules have been proved acceptable via dynamic stability tests. The bending beam rheometer test results imply that asphalt mixture containing PCM microcapsules revealed good crack resistance at low temperatures. Compared with the asphalt mixture sample in the reference experiment, the temperature difference of that containing the reinforced PCM microcapsules could reach 2.1°C, indicating a promising application prospect.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was funded by National Natural Science Foundation of China (51622805 and U1633116), the opening fund for the subject of Transportation Engineering in Tongji University (2016J012306) and Research Project of Yunan Department of Transportation [Grant No. 2016(A)16]. The authors declare that they have no conflict of interest.
References
AASHTO. 2012. Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer. AASHTO T313-12. Washington, DC: AASHTO.
Abdelrahman, M., D. R. Katti, A. Ghavibazoo, H. B. Upadhyay, and K. S. Katti. 2014. “Engineering physical properties of asphalt binders through nanoclay-asphalt interactions.” J. Mater. Civ. Eng. 26 (12): 04014099. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001017.
Al-Dubabe, I. A., A. A. Wahhab, I. M. Asi, and M. F. Ali. 1998. “Polymer modification of Arab asphalt.” J. Mater. Civ. Eng. 10 (3): 161–167. https://doi.org/10.1061/(ASCE)0899-1561(1998)10:3(161).
Behnia, B., W. G. Buttlar, and H. Reis. 2017. “Nondestructive low-temperature cracking characterization of asphalt materials.” J. Mater. Civ. Eng. 29 (5): 04016294. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001826.
Buyukbicakci, E., I. Temiz, H. Edral, and Z. Buyukbicakci. 2015. “A new approach for transformer cooling system: Application of phase change materials (PCM).” Acta Phys. Pol. A 127 (4): 1013–1015. https://doi.org/10.12693/APhysPolA.127.1013.
Chen, M. Z., J. Hong, S. P. Wu, W. Lu, and G. J. Xu. 2011. “Optimization of phase change materials used in asphalt pavement to prevent rutting.” Adv. Mater. Res. 219: 1375–1378. https://doi.org/10.4028/www.scientific.net/AMR.219-220.1375.
Farnam, Y., M. Krafcik, L. Liston, T. Washington, K. Erk, B. Tao, and J. Weiss. 2016. “Evaluating the use of phase change materials in concrete pavement to melt ice and snow.” J. Mater. Civ. Eng. 28 (4): 04015161. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001439.
Gorbunov, B. 2000. “Heterogeneous ice nucleation, Comparison with fletcher theory.” J. Aerosol Sci. 31 (S1): 256–257. https://doi.org/10.1016/S0021-8502(00)90265-9.
Huang, B., L. N. Mohammad, and G. W. Wathugala. 2004. “Application of a temperature dependent viscoplastic hierarchical single surface model for asphalt mixtures.” J. Mater. Civ. Eng. 16 (2): 147–154. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:2(147).
Kong, X., P. Jie, C. Yao, and Y. Liu. 2017a. “Experimental study on thermal performance of phase change material passive and active combined using for building application in winter.” Appl. Energy 206 (Nov): 293–302. https://doi.org/10.1016/j.apenergy.2017.08.176.
Kong, W., Z. Liu, Y. Yang, C. Zhou, and J. Lei. 2017b. “Preparation and characterizations of asphalt/lauric acid blends phase change materials for potential building materials.” Constr. Build. Mater. 152 (Oct): 568–575. https://doi.org/10.1016/j.conbuildmat.2017.05.039.
Kuznik, F., D. David, K. Johannes, and J. J. Roux. 2011. “A review on phase change materials integrated in building walls.” Renewable Sustainable Energy Rev. 15 (1): 379–391. https://doi.org/10.1016/j.rser.2010.08.019.
Lin, J., P. Guo, J. Xie, S. Wu, and M. Chen. 2013. “Effect of rejuvenator sealer materials on the properties of aged asphalt binder.” J. Mater. Civ. Eng. 25 (7): 829–835. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000702.
Ma, B., S. Adhikari, Y. Chang, J. Ren, J. Liu, and Z. You. 2013. “Preparation of composite shape-stabilized phase change materials for highway pavements.” Constr. Build. Mater. 42: 114–121. https://doi.org/10.1016/j.conbuildmat.2012.12.027.
Mondal, S. 2008. “Phase change materials for smart textiles: An overview.” Appl. Therm. Eng. 28 (11): 1536–1550. https://doi.org/10.1016/j.applthermaleng.2007.08.009.
Muchová, M., and F. Lendnicky. 1996a. “Investigation of heterogeneous nucleation using the induction time of crystallization. 1: Theory of induction time.” Polymer 37 (14): 3037–3043. https://doi.org/10.1016/0032-3861(96)89402-X.
Muchová, M., and F. Lendnicky. 1996b. “Investigation of heterogeneous nucleation using the induction time of crystallization. 2: Comparison of the theory and experimental measurement.” Polymer 37 (14): 3037–3043. https://doi.org/10.1016/0032-3861(96)89402-X.
Oliveira, F. R., M. Fernandes, N. Carneiro, and A. P. Souto. 2013. “Functionalization of wool fabric with phase-change materials microcapsules after plasma surface modification.” J. Appl. Polym. Sci. 128 (5): 2638–2647. https://doi.org/10.1002/app.38325.
Qin, Y. 2015. “A review on the development of cool pavements to mitigate urban heat island effect.” Renewable Sustainable Energy Rev. 52: 445–459. https://doi.org/10.1016/j.rser.2015.07.177.
Shaid, A., L. Wang, and R. Padhye. 2014. “The thermal protection and comfort properties of aerogel and PCM-coated fabric for firefighter garment.” J. Ind. Text. 45 (4): 611–625. https://doi.org/10.1177/1528083715610296.
Sharma, A., A. Shukla, C. R. Chen, and S. Dwivedi. 2013. “Development of phase change materials for building applications.” Energy Build. 64: 403–407. https://doi.org/10.1016/j.enbuild.2013.05.029.
Tan, H., C. Li, and Y. Li. 2011. “Simulation research on PCM freezing process to recover and store the cold energy of cryogenic gas.” Int. J. Therm. Sci. 50 (11): 2220–2227. https://doi.org/10.1016/j.ijthermalsci.2011.04.017.
Tan, H., Y. Li, H. Tuo, M. Zhou, and B. Tian. 2010. “Experimental study on liquid/solid phase change for cold energy storage of liquefied natural gas (LNG) refrigerated vehicle.” Energy 35 (5): 1927–1935. https://doi.org/10.1016/j.energy.2010.01.006.
Tarefder, R. A., and A. M. Zaman. 2010. “Nanoscale evaluation of moisture damage in polymer modified asphalts.” J. Mater. Civ. Eng. 22 (7): 714–725. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000072.
Wekumbura, C., J. Stastna, and L. Zanzotto. 2007. “Destruction and recovery of internal structure in polymer-modified asphalts.” J. Mater. Civ. Eng. 19 (3): 227–232. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:3(227).
Yoo, P. J., B. S. Eom, K. S. Park, and D. H. Kim. 2017. “Aggregate pre-coating approach using rubber- and silane-coupled thermoset polymer and emulsion for warm-mix asphalt mixtures.” Constr. Build. Mater. 152 (15): 708–714. https://doi.org/10.1016/j.conbuildmat.2017.07.053.
Zhang, W., T. Ma, G. Xu, X. Huang, M. Ling, X. Chen, and J. Xue. 2018. “Fatigue resistance evaluation of modified asphalt using a multiple stress creep and recovery (MSCR) test.” Appl. Sci. 8 (3): 417–429. https://doi.org/10.1016/j.apenergy.2018.02.087.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Nov 16, 2017
Accepted: May 24, 2018
Published online: Sep 4, 2018
Published in print: Nov 1, 2018
Discussion open until: Feb 4, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.