Effect of Temperature on Thermal Properties of Different Types of High-Strength Concrete
This article has been corrected.
VIEW CORRECTIONPublication: Journal of Materials in Civil Engineering
Volume 23, Issue 6
Abstract
The knowledge of high temperature thermal properties is critical for evaluating the fire response of concrete structures. This paper presents the effect of temperature on the thermal properties of different types of high-strength concrete (HSC). Specific heat, thermal conductivity, and thermal expansion are measured for three concrete types, namely, HSC, self-consolidating concrete (SCC), and fly ash concrete (FAC), in the temperature range from 20–800°C. The effect of steel, polypropylene, and hybrid fibers on thermal properties of HSC and SCC is also investigated. Results from experiments show that SCC possesses higher thermal conductivity, specific heat, and thermal expansion than HSC and FAC in the 20–800°C temperature range. Data generated from tests is utilized to develop simplified relationships for expressing different thermal properties as a function of temperature. The proposed thermal property relationships can be used as input data for evaluating the response of concrete structures under fire conditions.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research presented in this paper is supported by the Michigan State University through Strategic Partnership Grant (Grant No. UNSPECIFIED71-4434). Any opinions, findings, and conclusions or recommendations expressed in this paper are those of the authors and do not necessarily reflect the views of the sponsors.
References
Adl-Zarrabi, B., Boström, L., and Wickström, U. (2006). “Using the TPS method for determining the thermal properties of concrete and wood at elevated temperature.” Fire Mater., 30, 359–369.
ASCE. (1992). “Structural fire protection.” Manual 78, New York.
ASTM. (2006). “Standard test methods for linear thermal expansion of solid materials by thermomechanical analysis.” E831-06, West Conshocken, PA.
Bazant, Z. P., and Kaplan, M. F. (1996). Concrete at temperatures. material properties and mathematical models, Longman, Essex, England.
Eurocode. (2004). Design of concrete structures, Part 1.2. General rules—Structural fire design (EN1992-1-2), Commission of European Communities, Brussels.
Fu, Y. F., Wong, Y. L., Poon, C. S., Tang, C. A., and Lin, P. (2004). “Experimental study of micro/macro crack development and stress-strain relations of cement-based composite materials at elevated temperatures.” Cem. Concr. Res., 34(5), 789–797.
Ganguli, S., Roy, A. K., and Anderson, D. P. (2008). “Improved thermal conductivity for chemically functionalized exfoliated graphite/epoxy composites.” Carbon, 46(5), 806–817.
Harada, T., Takeda, J., Yamane, S., and Furumura, F. (1972). “Strength, elasticity, and the thermal properties of concrete subjected to elevated temperatures.” Concrete for nuclear reactors, SP-34, V. I, American Concrete Institute, Farmington Hills, MI, 377–406.
Harmathy, T. Z. (1970). “Thermal properties of concrete at elevated temperatures.” J. Mater., 47–74.
Harmathy, T. Z., and Allen, L. W. (1973). “Thermal properties of selected masonry unit concretes.” ACI J. Proc., 70(2), 132–142.
Hertz, K. D. (2003). “Limits of spalling of fire-exposed concrete.” Fire Saf. J., 38, 103–116.
Kodur, V. K. R., Dwaikat, M. M. S., and Dwaikat, M. B. (2008). “High temperature properties of concrete for fire resistance modelling of structures.” ACI Mater. J., 105(5), 517–527.
Kodur, V. K. R., and Sultan, M. A. (2003). “Effect of temperature on thermal properties of high-strength concrete.” J. Mater. Civ. Eng., 15(2), 101–107.
Kodur, V. K. R., Wang, T. C., and Cheng, F. P. (2004). “Predicting the fire resistance behaviour of high strength concrete columns.” Cem. Concr. Compos., 26, 141–153.
Kodur, V. R. (2000). “Spalling in high strength concrete exposed to fire—Concerns, causes, critical parameters, and cures.” Proc., ASCE Structures Congress, Philadelphia.
Kodur, V. R., and Sultan, M. A. (1998). “Structural behavior of high strength concrete columns exposed to fire.” Proc., Int. Symp. on High Performance and Reactive Powder Concrete, Sherbrooke, Canada, 217–232.
Lie, T. T. (1992). “Structural fire protection.” ASCE Engineering Practice No. 78, New York.
Martha, G. V., Dombrowski, K., and Gajda, W. (1997). “Thermal properties of commercially available high-strength concretes.” Cem. Concr. Aggregates, 19(1), 38–53.
Mendenhall, W., and Sincich, T. (2007). Statistics for engineering and the sciences, 5th Ed., Prentice Hall, Upper Saddle River, NJ.
Phan, L. T. (1996). “Fire performance of high-strength concrete. A report of the state-of-the-art.” Rep. NISTIR 5934, National Institute of Standards and Technology, Gaithersburg, MD.
Schneider, U. (1982). “Behavior of concrete at high temperatures.” German committee for reinforced concrete, Heft 337, Verlag, W. Ernst and Sohn, Berlin, 1–122.
Shehata, M. H., and Thomas, M. D. A. (2000). “The effect of fly ash composition on the expansion of concrete due to alkali-silica reaction.” Cem. Concr. Res., 30(12), 1063–1072.
Shin, K. Y., Kim, S., Kim, J., Chung, M., and Jung, P. (2002). “Thermophysical properties and transient heat transfer of concrete at elevated temperatures.” Nucl. Eng. Des., 212, 233–241.
Society of Fire Protection Engineers (SFPE). (2008). Handbook of fire protection engineering, 4th Ed., Cleveland.
Information & Authors
Information
Published In
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Dec 4, 2009
Accepted: Nov 2, 2010
Published online: Nov 8, 2010
Published in print: Jun 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.