Optimal Sprinkler Spacing for a Mini Center Pivot System
Publication: Journal of Irrigation and Drainage Engineering
Volume 148, Issue 11
Abstract
This paper offers a new model for determining the optimal spacing of mini center pivot system (MCPS) nozzles for high water application uniformity. The strengths of the study included an in-depth analysis of optimum nozzle spacing and the high impact on the efficiency of the MCPS. To achieve this goal, a genetic algorithm was used to maximize the uniformity coefficient under the MCPS when the design parameters were inputted and combined with the formula of Heermann and Hein. The optimization is based on the water distribution modeling, and Heermann and Hein uniformity coefficient (CUH) calculation of three existing MCPS, 60, 50, and 46 m in length. A comparison between the CUH values obtained experimentally and by the proposed model, is used to validate the proposed model. According to the findings of this study, the proposed model can optimize the CUH uniformity coefficient by 23.87%, 29.99%, and 17.96% for the three studied MCPSs 60, 50, and 46 m in length, respectively, while determining optimal nozzle spacing.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The available data that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The support of our research program by The General Directorate of Scientific Research and Technological Development of the Algerian Ministry of Higher Education and Scientific Research is deeply appreciated.
References
ASABE (American Society of Agricultural and Biological Engineers). 1996. The evaluation of center pivots and linear-move sprinkler irrigation systems. ASABE/ANSI Standard 436. St. Joseph, MI: ASABE.
Baiamonte, G., G. Provenzano, M. Iovino, and M. Elfahl. 2021. “Hydraulic design of the center-pivot irrigation system for gradually decreasing sprinkler spacing.” J. Irrig. Drain. Eng. 147 (7): 04021027. https://doi.org/10.1061/(ASCE)IR.1943-4774.0001568.
Ben Charfi, I., C. Corbari, D. Skokovic, J. Sobrino, and M. Mancini. 2021. “Modeling of water distribution under center pivot irrigation technique.” J. Irrig. Drain. Eng. 147 (7): 04021024. https://doi.org/10.1061/(ASCE)IR.1943-4774.0001571.
Bliesner, R. D., and J. Keller. 1990. Sprinkle and trickle irrigation. New York: Van Nostrand Reinhold.
Bremond, B., and B. Molle. 1995. “Characterization of rainfall under center pivot: Influence of measuring procedure.” J. Irrig. Drain. Eng. 121 (5): 347–353. https://doi.org/10.1061/(ASCE)0733-9437(1995)121:5(347).
Christiansen, J. E. 1942. Irrigation by sprinkling. Berkeley, CA: Univ. of California.
Coit, D. W. 1998. “Genetic algorithms and engineering design.” Eng. Econ. 43 (4): 379–381. https://doi.org/10.1080/00137919808903206.
Delirhasannia, R., A. A. Sadraddini, A. H. Nazemi, D. Farsadizadeh, and E. Playán. 2010. “Dynamic model for water application using centre pivot irrigation.” Biosyst. Eng. 105 (4): 476–485. https://doi.org/10.1016/j.biosystemseng.2010.01.006.
Hadji, M. S., G. Ayoub, A. Abdelmalek, and M. Khaled. 2019. “Theoretical sprinkler-spacing configurations in center pivot irrigation system.” Water Energy Int. 62 (9): 54–59.
Hadji, M. S., A. Guerrah, and A. Atia. 2021. “Irrigation uniformity optimisation of a mini-centre pivot system.” Eng. Agríc. 41 (5): 526–535. https://doi.org/10.1590/1809-4430-eng.agric.v41n5p526-535/2021.
Heermann, D. F., and P. R. Hein. 1968. “Performance characteristics of self-propelled center-pivot sprinkler irrigation system.” Trans. ASAE 11 (1): 11–15. https://doi.org/10.13031/2013.39320.
ISO. 2009. Agricultural irrigation equipment—Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles—Etermination of uniformity of water distribution. ISO 11545. Geneva: ISO.
Jiao, J., Y. Wang, L. Han, and D. Su. 2017. “Comparison of water distribution characteristics for two kinds of sprinklers used for center pivot irrigation systems.” Appl. Sci. 7 (4): 421. https://doi.org/10.3390/app7040421.
Lecina, S., R. W. Hill, and J. B. Barker. 2016. “Irrigation uniformity under different socio-economic conditions: Evaluation of centre pivots in Aragon (Spain) and Utah (USA).” Irrig. Drain. 65 (4): 549–558. https://doi.org/10.1002/ird.2031.
López-Silva, M., D. Carmenates-Hernández, A. Mujica-Cervantes, and P. Paneque-Rondon. 2018. “Software for the hydraulic design of central pivot irrigation systems.” Rev. Cienc. Téc. Agropecuarias 27 (4): 1–8.
Marjang, N., G. P. Merkley, and M. Shaban. 2012. “Center-pivot uniformity analysis with variable container spacing.” Irrig. Sci. 30 (2): 149–156. https://doi.org/10.1007/s00271-011-0272-6.
New, L., and G. Fipps. 1976. Center pivot irrigation. College Station, TX: Texas A&M Univ.
Olivero, M., D. Pasquale, A. Ghidoni, and S. Rebay. 2014. “Three-dimensional turbulent optimization of vaned diffusers for centrifugal compressors based on metamodel-assisted genetic algorithms.” Optim. Eng. 15 (4): 973–992. https://doi.org/10.1007/s11081-013-9242-6.
Phocaides, A. 2007. Handbook on pressurized irrigation techniques. Rome, Italy: Food and Agriculture Organization.
Rebai, A. O., T. Hartani, M. N. Chabaca, and M. Kuper. 2017. “Une innovation incrémentielle: La conception et la diffusion d’un pivot d’irrigation artisanal dans le Souf (Sahara algérien).” Cah. Agric. 26 (3): 35005. https://doi.org/10.1051/cagri/2017024.
Robles Rovelo, C. O., N. Zapata Ruiz, J. Burguete Tolosa, J. R. Félix, and B. Latorre. 2019. “Characterization and simulation of a low-pressure rotator spray plate sprinkler used in center pivot irrigation systems.” Water 11 (8): 1684. https://doi.org/10.3390/w11081684.
Roupec, J. 2010. “Advanced genetic algorithms for engineering design problems.” Eng. Mech. 17 (5–6): 407–417.
Saraswat, M., and A. K. Sharma. 2013. “Genetic algorithm for optimization using MATLAB.” Int. J. Adv. Res. Comput. Sci. 4 (3): 155–159.
Scherer, T. F., W. Kranz, D. Pfost, H. Werner, J. Wright, and C. D. Yonts. 1999. Sprinkler irrigation systems, MWPS-30. Ames, IA: Iowa State Univ.
Sui, R., and D. K. Fisher. 2015. “Field test of a center pivot irrigation system.” Appl. Eng. Agric. 31 (1): 83–88.
Tu, Q., X. Wang, and H. Li. 2012. “Optimization of sprinkler irrigation machine based on genetic algorithms.” In Proc., 2012 Dallas, Texas, July 29–August 1, 2012. St. Joseph, MI: American Society of Agricultural and Biological Engineers.
Valín, M. I., M. R. Cameira, P. R. Teodoro, and L. S. Pereira. 2012. “DEPIVOT: A model for center-pivot design and evaluation.” Comput. Electron. Agric. 87 (Sep): 159–170. https://doi.org/10.1016/j.compag.2012.06.004.
Varlev, I. 1988. “Optimizing the uniformity of irrigation and fertilization.” Agric. Water Manage. 13 (2–4): 285–296. https://doi.org/10.1016/0378-3774(88)90161-8.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Mar 17, 2022
Accepted: Jun 26, 2022
Published online: Sep 15, 2022
Published in print: Nov 1, 2022
Discussion open until: Feb 15, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.