Shallow Water Hydro-Sediment-Morphodynamic Equations for Fluvial Processes
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Hydraulic Engineering
Volume 143, Issue 5
Abstract
Forum papers are thought-provoking opinion pieces or essays founded in fact, sometimes containing speculation, on a civil engineering topic of general interest and relevance to the readership of the journal. The views expressed in this Forum article do not necessarily reflect the views of ASCE or the Editorial Board of the journal.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The work reported in this paper is funded by the Natural Science Foundation of China (Grant Nos. 51279144 and 11432015) and the Chinese Academy of Sciences (Grant No. KZZD-EW-05-01-03). The comments of anonymous reviewers and editors helped improve the manuscript, which are very much appreciated.
References
Armanini, A. (2013). “Granular flows driven by gravity.” J. Hydraul. Res., 51(2), 111–120.
Armanini, A., and Di Silvio, G. (1988). “A one-dimensional model for the transport of a sediment mixture in non-equilibrium conditions.” J. Hydraul. Res., 26(3), 275–292.
Armanini, A., Fraccarollo, L., and Rosatti, G. (2009). “Two-dimensional simulation of debris flows in erodible channels.” Comput. Geosci., 35(5), 993–1006.
ASCE/EWRI Task Committee. (2011). “Earthen embankment breaching.” J. Hydraul. Eng., 1549–1564.
Batchelor, G. (1967). An introduction to fluid dynamics, Cambridge University Press, Cambridge, U.K.
Bohorquez, P., and Ancey, C. (2015). “Stochastic-deterministic modeling of bed load transport in shallow water flow over erodible slope: Linear stability analysis and numerical simulation.” Adv. Water Resour., 83, 36–54.
Bouchut, F., Fernandez-Nieto, E. D., Mangeney, A., and Narbona-Reina, G. (2015). “A two-phase shallow debris flow model with energy balance.” ESAIM-Math. Model. Numer. Anal., 49(1), 101–140.
Bridge, J., and Demicco, R. (2008). Earth surface processes, landforms and sediment deposits, Cambridge University Press, Cambridge, U.K.
Cao, Z., Egashira, S., and Carling, P. (2003). “Role of suspended-sediment particle size in modifying velocity profiles in open channel flows.” Water Resour. Res., 39(2), 1–15.
Cao, Z., and Hu, P. (2008). “Comment on ‘Long waves in erodible channels and morphodynamic influence’ by Stefano Lanzoni et al.” Water Resour. Res., 44(6), W06601.
Cao, Z., Hu, P., Hu, K., Pender, G., and Liu, Q. (2015a). “Modelling roll waves with shallow water equations and turbulent closure.” J. Hydraul. Res., 53(2), 161–177.
Cao, Z., Hu, P., and Pender, G. (2011). “Multiple time scales of fluvial processes with bed load sediment and implications for mathematical modeling.” J. Hydraul. Eng., 267–276.
Cao, Z., Hu, P., Pender, G., and Liu, H. (2016). “Non-capacity transport of non-uniform bed load sediment in alluvial rivers.” J. Mountain Sci., 13(3), 377–396.
Cao, Z., Li, J., Pender, G., and Liu, Q. (2015b). “Whole-process modelling of reservoir turbidity currents by a double layer-averaged model.” J. Hydraul. Eng., .
Cao, Z., Li, Y., and Yue, Z. (2007). “Multiple time scales of alluvial rivers carrying suspended sediment and their implications for mathematical modeling.” Adv. Water Resour., 30(4), 715–729.
Cao, Z., Li, Z., Pender, G., and Hu, P. (2012). “Non-capacity or capacity model for fluvial sediment transport.” Proc., ICE—Water Manage., 165(4), 193–211.
Cao, Z., Pender, G., Wallis, S., and Carling, P. (2004). “Computational dam-break hydraulics over erodible sediment bed.” J. Hydraul. Eng., 689–703.
Capart, H., and Young, D. L. (1998). “Formation of a jump by the dam-break wave over a granular bed.” J. Fluid Mech., 372, 165–187.
Charru, F. (2006). “Selection of the ripple length on a granular bed sheared by a liquid flow.” Physics of Fluids, 18(12), 121508.
Chien, N., and Wan, Z. (1999). Mechanics of sediment transport, ASCE, Reston, VA.
Cui, Y. (2007). “The unified gravel-sand (TUGS) model: Simulating sediment transport and gravel/sand grain size distributions in gravel-bedded rivers.” Water Resour. Res., 43(10), W10436.
Cui, Y., Paola, C., and Parker, G. (1996). “Numerical simulation of aggradation and downstream fining.” J Hydraul Res., 34(2), 185–204.
Cui, Y., and Parker, G. (2005). “Numerical model of sediment pulses and sediment-supply disturbances in mountain rivers.” J. Hydraul. Eng., 646–656.
Cui, Y., Parker, G., Lisle, T. E., Pizzuto, J. E., and Dodd, A. M. (2005). “More on the evolution of bed material waves in alluvial rivers.” Earth Surf. Process. Landforms, 30(1), 107–114.
Cunge, J. A., Holly, F. M., and Verwey, A. (1980). Practical aspects of computational river hydraulics, Pitman, London.
Cunge, J. A., and Perdreau, N. (1973). “Mobile bed fluvial mathematical models.” La Houille Blanche, 7(7), 561–580.
de Vries, M. (1965). “Considerations about non-steady bed-load transport in open channels.” Proc., 11th Congress, International Association for Hydraulic Research, Delft, Netherlands, 3.8.1–3.8.8.
Di Cristo, C., Greco, M., Iervolino, M., Leopardi, A., and Vacca, A. (2015). “Two-dimensional two-phase depth-integrated model for transients over mobile bed.” J. Hydraul. Eng., .
Einstein, H. A. (1950). “The bed-load function for sediment transportation in open channel flows.”, U.S. Dept. of Agriculture, Washington, DC.
Fang, H., and Wang, G. (2000). “Three-dimensional mathematical model of suspended-sediment transport.” J. Hydraul. Eng., 578–592.
Frey, P., and Church, M. (2009). “How river beds move.” Science, 325(5947), 1509–1510.
Furbish, D. J., Haff, P. K., Roseberry, J. C., and Schmeeckle, M. W. (2012). “A probabilistic description of the bed load sediment flux. 1: Theory.” J. Geophys. Res., 117, F03031.
Gomez, B. (1991). “Bedload transport.” Earth-Sci. Rev., 31(2), 89–132.
Greco, M., Iervolino, M., Leopardi, A., and Vacca, A. (2012). “A two-phase model for fast geomorphic shallow flows.” Int. J. Sediment Res., 27(4), 409–425.
Greimann, B., Lai, Y., and Huang, J. (2008). “Two-dimensional total sediment load model equations.” J. Hydraul. Eng., 1142–1146.
Hirano, M. (1971). “River bed degradation with armouring.” Proc. Jpn. Soc. Civ. Eng., 195, 55–65 (in Japanese).
Hu, P. (2013). “Multiple time scales of fluvial processes and mathematical river modelling.” Ph.D. thesis, Wuhan Univ., Wuhan, China (in Chinese).
Hu, P., and Cao, Z. (2009). “Fully coupled mathematical modeling of turbidity currents over erodible bed.” Adv. Water Resour., 32(1), 1–15.
Hu, P., Cao, Z., Pender, G., and Liu, H. (2014). “Numerical modelling of riverbed grain size stratigraphic evolution.” Int. J. Sediment Res., 29(3), 329–343.
Hu, P., Cao, Z., Pender, G., and Tan, G. (2012). “Numerical modelling of turbidity currents in the Xiaolangdi Reservoir, Yellow River, China.” J. Hydrol., 464-465, 41–53.
Huang, H., Imran, J., and Pirmez, C. (2005). “Numerical model of turbidity currents with a deforming bottom boundary.” J. Hydraul. Eng., 283–293.
Huang, W., Cao, Z., Carling, P., and Pender, G. (2014). “Coupled 2D hydrodynamic and sediment transport modeling of megaflood due to glacier dam-break in Altai Mountains, Southern Siberia.” J. Mountain Sci., 11(6), 1442–1453.
Huang, W., Cao, Z., Pender, G., Liu, Q., and Carling, P. (2015). “Coupled flood and sediment transport modelling with adaptive mesh refinement.” Sci. China Technol. Sci., 58(8), 1425–1438.
Huang, W., Cao, Z., Yue, Z., Pender, G., and Zhou, J. (2012). “Coupled modelling of flood due to natural landslide dam breach.” Proc. ICE - Water Manage., 165(10), 525–542.
Iverson, R. M. (1997). “The physics of debris flows.” Rev. Geophys., 35(3), 245–296.
Iverson, R. M., and Denlinger, R. P. (2001). “Flow of variably fluidized granular masses across three-dimensional terrain. 1: Coulomb mixture theory.” J. Geophys. Res., 106(B1), 537–552.
Iverson, R. M., and Ouyang, C. (2015). “Entrainment of bed material by earth-surface mass flows: Review and reformulation of depth-integrated theory.” Rev. Geophys., 53(1), 27–58.
Kim, D. H. (2015). “H2D morphodynamic model considering wave, current and sediment interaction.” Coast. Eng., 95, 20–34.
Kim, J., Ivanov, V. Y., and Katopodes, N. D. (2013). “Modeling erosion and sedimentation coupled with hydrological and overland flow processes at the watershed scale.” Water Resour. Res., 49(9), 5134–5154.
Kneller, B., and Buckee, C. (2000). “The structure and fluid mechanics of turbidity currents: A review of some recent studies and their geological implications.” Sedimentology, 47(s1), 62–94.
Lanzoni, S., Siviglia, A., Frascati, A., and Seminara, G. (2006). “Long waves in erodible channels and morphodynamic influence.” Water Resour. Res., 42(6), W06D17.
LeVeque, R. J. (2002). Finite volume methods for hyperbolic problems, Cambridge University Press, Cambridge, U.K.
Li, J., Cao, Z., Pender, G., and Liu, Q. (2013). “A double layer-averaged model for dam-break flows over mobile bed.” J. Hydraul. Res., 51(5), 518–534.
Li, Y., and Xie, J. (1986). “Mathematical modelling of two-dimensional flow in alluvial rivers.” Chin. J. Hydraul. Eng., 11, 9–15 (in Chinese).
Lyn, D. A. (1987). “Unsteady sediment-transport modeling.” J. Hydraul. Eng., 1–15.
Marsooli, R., and Wu, W. (2015). “Three-dimensional numerical modeling of dam-break flows with sediment transport over movable beds.” J. Hydraul. Eng., .
Nelson, P. A., McDonald, R. R., Nelson, J. M., and Dietrich, W. E. (2015a). “Coevolution of bed surface patchiness and channel morphology. 1: Mechanisms of forced patch formation.” J. Geophys. Res.: Earth Surf., 120(9), 1687–1707.
Nelson, P. A., McDonald, R. R., Nelson, J. M., and Dietrich, W. E. (2015b). “Coevolution of bed surface patchiness and channel morphology. 2: Numerical experiments.” J. Geophys. Res.: Earth Surf., 120(9), 1708–1723.
Neto, C., Drew, R. E., Bonaccurso, E., Butt, H. J., and Craig, V. S. J. (2005). “Boundary slip in Newtonian liquids: A review of experimental studies.” Rep. Prog. Phys., 68(12), 2859–2897.
Nicholas, A. P. (2010). “Reduced-complexity modeling of free bar morphodynamics in alluvial channels.” J. Geophys. Res., 115(F4), F04021.
Oreskes, N., Shrader-Frechette, K., and Belitz, K. (1994). “Verification, validation and confirmation of numerical models in the earth sciences.” Science, 263(5147), 641–646.
Ouyang, C., He, S., and Xu, Q. (2015). “MacCormack-TVD finite difference solution for dam break hydraulics over erodible sediment beds.” J. Hydraul. Eng., .
Papanicolaou, A. N., Elhakeem, M., Krallis, G., Prakash, S., and Edinger, J. (2008). “Sediment transport modeling review—Current and future developments.” J. Hydraul. Eng., 1–14.
Parker, G. (2004). “1D sediment transport morphodynamics with applications to river and turbidity currents.” St. Anthony Falls Laboratory, Univ. of Minnesota, Minneapolis.
Pelanti, M., Bouchut, F., and Mangeney, A. (2008). “A Roe-type scheme for two-phase shallow granular flows over variable topography.” ESAIM-Math. Model. Numer. Anal., 42(5), 851–885.
Pelosi, A., and Parker, G. (2014). “Morphodynamics of river bed variation with variable bedload step length.” Earth Surf. Dyn., 2(1), 243–253.
Pitman, E. B., and Le, L. (2005). “A two-fluid model for avalanche and debris flows.” Proc. R. Soc. A-Math. Phys. Eng. Sci., 363(1832), 1573–1601.
Pudasaini, S. P. (2012). “A general two-phase debris flow model.” J. Geophys. Res., 117, F03010.
Pudasaini, S. P., Wang, Y., and Hutter, K. (2005). “Modelling debris flows down general channels.” Nat. Hazards Earth Syst. Sci., 5(6), 799–819.
Qian, H., Cao, Z., Liu, H., and Pender, G. (2016). “Numerical modelling of alternate bar formation, development and sediment sorting in straight channels.” Earth Surf. Processes Landforms, in press.
Qian, H., Cao, Z., Pender, G., Liu, H., and Hu, P. (2015). “Well-balanced numerical modelling of non-uniform sediment transport in alluvial rivers.” Int. J. Sediment Res., 30(2), 117–130.
Rosatti, G., and Begnudelli, L. (2013). “Two-dimensional simulation of debris flows over mobile bed: Enhancing the TRENT2D model by using a well-balanced generalized Roe-type solver.” Comput. Fluids, 71, 179–195.
Seal, R., Paola, C., Parker, G., Southard, J. B., and Wilcock, P. R. (1997). “Experiments on downstream fining of gravel. I: Narrow-channel runs.” J. Hydraul. Eng., 874–884.
Spinewine, B., and Capart, H. (2013). “Intense bed-load due to a sudden dam-break.” J. Fluid Mech., 731, 579–614.
Toro, E. F. (2001). Shock-capturing methods for free-surface shallow flows, Wiley, Chichester, U.K.
van Rijn, L. C. (1993). Principles of sediment transport in rivers, estuaries and coastal seas, Aqua Publications, Blokzijl, Netherlands.
Wallis, G. (1969). One-dimensional two-phase flow, McGraw-Hill, New York.
Wu, W. (2007). Computational river dynamics, Taylor & Francis, London.
Wu, W., Rodi, W., and Wenka, T. (2000). “3D numerical modeling of flow and sediment transport in open channels.” J. Hydraul. Eng., 4–15.
Wu, W., and Wang, S. S. Y. (2007). “One-dimensional modeling of dam-break flow over movable beds.” J. Hydraul. Eng., 48–58.
Xia, J., Lin, B., Falconer, R. A., and Wang, G. (2010). “Modelling dam-break flows over mobile beds using a 2D coupled approach.” Adv. Water Resour., 33(2), 171–183.
Xiao, H., Young, Y. L., and Prevost, J. H. (2010). “Hydro- and morpho-dynamic modeling of breaking solitary waves over a fine sand beach. Part II: Numerical simulation.” Mar. Geol., 269(3–4), 119–131.
Xie, J., ed. (1990). River modelling, China Water and Power, Beijing (in Chinese).
Zech, Y., Soares-Frazao, S., and Van Emelen, S. (2015). “Modelling of fast hydraulic transients: Issues, challenges, perspectives.” La Houille Blanche, (5), 5–15.
Zhu, F., and Dodd, N. (2015). “The morphodynamics of a swash event on an erodible beach.” J. Fluid Mech., 762, 110–140.
Information & Authors
Information
Published In
Journal of Hydraulic Engineering
Volume 143 • Issue 5 • May 2017
Copyright
©2017 American Society of Civil Engineers.
History
Received: Sep 5, 2015
Accepted: Sep 20, 2016
Published online: Jan 23, 2017
Published in print: May 1, 2017
Discussion open until: Jun 23, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.