Discussion of “Velocity Profile and Flow Resistance Models for Developing Chute Flow” by Oscar Castro-Orgaz
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Hydraulic Engineering
Volume 137, Issue 12
HY.1943-7900.0000367/asset/0acbaf28-67ce-46cc-b3f9-34e709f77a8f/assets/(asce)hy.1943-7900.0000367.fp.png)
Get full access to this article
View all available purchase options and get full access to this article.
References
Afzal, N. (1983). “Analysis of a turbulent boundary layer subjected to a strong adverse pressure gradient.” Int. J. Eng. Sci., 21(6), 563–76.
Afzal, N. (1996). “Wake layer in turbulent boundary layer with pressure gradient: A new approach.” IUTAM Symp. on Asymptotic Methods for Turbulent Shear Flows at High Reynolds Numbers, K. Gersten, ed., Kluwer Academic, 95–118.
Afzal, N. (1997). “Power laws in the wall and wake layers of a turbulent boundary layer.” Proc., 7th Asian Congress of Fluid Mechanics, Allied Publisher, New Delhi, India, 805–808.
Afzal, N. (2001). “Power and log laws velocity profiles in turbulent boundary layer flows: Equivalent relations at large Reynolds numbers.” Acta Mech., 151(3-4), 195–216.
Afzal, N. (2005). “Analysis of power law and log law velocity profiles in the overlap region of a turbulent wall jet.” Proc. R. Soc. London, Ser. A, 461(2058), 1889–1910.
Afzal, N. (2007). “Power law velocity profile in the turbulent boundary layers on transitional rough wall.” J. Fluids Eng., 129(8), 1083–1100.
Antonia, R. A., and Krogstad, P. A. (2001). “Turbulence structure in boundary layer over different types of surface roughness.” Fluid Dyn. Res., 28(2), 139–157.
Balachandar, R., Hagel, K., and Blakely, D. (2002). “Velocity distribution in decelerating flow over rough surface.” Can. J. Civ. Eng., 29(2), 211–221.
Barenblatt, G. I. (1993). “Scaling laws for fully developed turbulent shear flows. Part I. Basic hypotheses and analysis.” J. Fluid Mech., 248, 513–520.
Barenblatt, G. I., Chorin, A. J., and Prostokishin, V. M. (2000). “Self-similar intermediate structures in turbulent boundary layers at large Reynolds numbers.” J. Fluid Mech., 410, 263–283.
Bergstrom, D. J., Tachie, M. F., and Balachandar, R. (2001). “Application of power laws to low Reynolds number boundary layers on smooth and rough surfaces.” Phys. Fluids, 13(11), 3277–3284.
Bruns, J., Dengel, P., and Fernholz, H. H. (1992). Mean flow and turbulence measurements in an incompressible two dimensional turbulent boundary layer Part I: Data, Hermann Föttinger Institut für Thermound Fluiddynamik, Technische Universität, Berlin.
Castro-Orgaz, O. (2009). “Hydraulics of developing chute flow.” J. Hydraul. Res., 47(2), 185–194.
Castro-Orgaz, O., and Hager, W. H. (2010). “Drawdown curve and turbulent boundary layer development for chute flow.” J. Hydraul. Res., 48(5), 591–602.
Coles, D. E. (1956). “The law of the wake in the turbulent boundary layer.” J. Fluid Mech., 1(02), 191–226.
Collins, D. J., Coles, D. E., and Hicks, J. W. (1978). “Measurements in the turbulent boundary layer at constant pressure in subsonic and supersonic flow. Part I: Mean flow.” AEDC-TR-78-21, Jet Propulsion Laboratory, Pasadena, CA.
Dean, R. B. (1978). “Reynolds number dependence of skin friction and other bulk flow variables in two-dimensional rectangular duct flow.” J. Fluids Eng., 100(2), 215–224.
Erm, L. P., and Joubert, P. N. (1991). “Low Reynolds-number turbulent boundary layers.” J. Fluid Mech., 230, 1–44.
Fernholz, H. H., Krause, E., Nockemann, M., and Schober, M. (1995). “Comparative measurements in the canonical boundary layer at on the wall of the German–Dutch windtunnel,” Phys. Fluids 7(6), 1275–1281.
George, W., and Castillo, L. (1997). “Zero pressure gradient turbulent boundary layer.” Appl. Mech. Rev., 50(12), 689–729.
Granville, P. S. (1976). “A modified law of the wake for turbulent shear flows. J. Fluids Eng., 98(3), 578–580.
Hites, M. H. (1997). “Scaling of high-Reynolds number turbulent boundary layers in the national diagnostic facility.” Ph.D. thesis, Illinois Institute of Technology, Chicago.
Kameda, T., Osaka, H., and Mochizuki, S. (1998). “Mean flow quantities for the turbulent boundary layer over a k-type rough wall.” 13th Australasian Fluid Mechanics Conf., Monash Univ., Melbourne, 357–360.
Kotey, N. A., Bergstrom, D. J., and Tachie, T. F. (2003). “Power law for rough wall turbulent boundary layer.” Phys. Fluids, 15(6), 1396–1404.
Krogstad, K. A. and Antonia, R. A. (1999). “Surface roughness effects in turbulent boundary layers.” Exp. Fluids, 27(5), 450–460.
Lewkowicz, A. K. (1982). “An improved universal wake function for turbulent boundary layers and some of its consequences.” Z. Flugwiss. Weltraumforsch., 6, 261–266.
Osaka, H. and Mochizuki, S. (1991). “On turbulence structure of the boundary layer on d-type rough wall.” Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, R. K. Shah, E. N. Ganic, and K. T. Yang, eds., Elsevier Science, New York, 412–422.
Osterlund, J. M. (1999). “Experimental studies of zero pressure-gradient turbulent boundary layer flow.” Ph.D. thesis, Royal Institute of Technology, Stockholm, Sweden.
Poggi, D., Porporato, A., and Ridolfi, L. (2003). “Analysis of small scale structure of turbulence on smooth and rough walls.” Phys. Fluids, 15(1), 35–46.
Purtell, L. P., Klebanoff, P. S., and Buckley, F. T. (1981). “Turbulent boundary layer at low Reynolds number.” Phys. Fluids, 24(5), 802–811.
Rahman, S., and Webster, D. R. (2005). “The effects of bed roughness on the scaler fluctuations of turbulent boundary layer.” Exp. Fluids, 38(3), 372–384.
Schultz, M. P., and Flack, K. A. (2003). “Turbulent boundary layers over surfaces smoothed by sanding,” J. Fluids Eng., 125(5), 863–870.
Schultz, M. P., and Flack, K. A. (2005). “Outer layer similarity in fully rough wall turbulent boundary layers.” Exp. Fluids, 38(3), 328–340.
Schultz, M. P., and Myers, A. (2003). “Comparison of three roughness function determination methods.” Exp. Fluids, 35(4), 372–379.
Seena, A. and Afzal, N. (2008). “Power law velocity and temperature profiles in a turbulent channel flow.” J. Heat Transfer, 130(9), 091701.
Smalley, R. J., Antonia, R. A., and Djenidi, L. (2001). “Self preservation of rough-wall turbulent boundary layers.” Eur. J. Mech. B Fluids, 20(5), 591–602.
Smith, R. W. (1994). “Effect of Reynolds number on the structure of turbulent boundary layers.” Ph.D. thesis, Princeton Univ., Princeton, NJ.
Stratford, B. S. (1959). “The prediction of separation of the turbulent boundary layers.” J. Fluid Mech., 5, 1–35.
Townsend, A. A. (1960). “The development of turbulent boundary layers with negligible wall stress.” J. Fluid Mech., 8(01), 143–155.
Winter, K. G., and Gaudet, L. (1973). “Turbulent boundary-layer studies at high Reynolds numbers at Mach numbers between 0.2 and 2.8.” Rep. No. 3712, Aeronautical Research Council, London.
Information & Authors
Information
Published In
Journal of Hydraulic Engineering
Volume 137 • Issue 12 • December 2011
Pages: 1693 - 1696
Copyright
© 2011 American Society of Civil Engineers.
History
Received: Nov 9, 2010
Accepted: Nov 17, 2010
Published online: Jul 15, 2011
Published in print: Dec 1, 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.