Closure to “Static Capacity of Closed-Ended Pipe Pile Driven in Gravelly Sand” by Eshan Ganju, Fei Han, Monica Prezzi, and Rodrigo Salgado
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 147, Issue 8
![First page of PDF](/cms/10.1061/(ASCE)GT.1943-5606.0002556/asset/9987c90e-d84d-442c-9e8b-fa7c1bf9e8e2/assets/(asce)gt.1943-5606.0002556.fp.png)
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. 2017. “AASHTO LRFD bridge design specifications.” In AASHTO LRFD bridge design manual, 10-1–10-172. Washington, DC: AASHTO.
Aoki, N., and D. Velloso. 1975. “An approximate method to estimate the bearing capacity of piles.” In Proc., 5th Pan-American Conf. on soil Mechanics and Foundation Engineering, 367–376. Buenos Aires: Sociedad Argentina de Ingeniería Geotécnica.
Aoki, N., D. A. Velloso, and J. A. Salamoni. 1978. “Fundações para o silo Vertical de 100000 t no Porto de Paranaguá.” In Proc., 6th Brazilian Conf. of Soil Mechanics and Foundation Engineering, 125–132. São Paulo, Brazil: Associação Brasileira de Mecânica dos Solos e Engenharia Geotécnica.
ASTM. 2013. Standard test methods for deep foundations under static axial tensile load. ASTM D1143/D1143M-07. West Conshohocken, PA: ASTM.
BIS (Bureau of Indian Standards). 2010. Design and construction of pile foundations: Code of practice. IS 2911: 1-1. New Delhi, India: BIS.
Briaud, J.-L., B. H. Moore, and G. B. Mitchell. 1989. “Analysis of pile load tests at Lock and Dam 26.” In Foundation engineering: Current principles and practices, 925–942. Reston, VA: ASCE.
BSI (British Standards Institution). 2015. Code of practice for foundations. BS 8004-2015. London: BSI.
Davisson, M. T. 1975. “Pile load capacity.” In Proc., ASCE Conf. Design Construction and Performance of Deep Foundations. New York: ASCE.
Han, F., E. Ganju, M. Prezzi, and R. Salgado. 2019a. “Closure to ‘Effects of interface roughness, particle geometry, and gradation on the sand–steel interface friction angle’ by Fei Han, Eshan Ganju, Rodrigo Salgado, and Monica Prezzi.” J. Geotech. Geoenviron. Eng. 145 (11): 07019017. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002172.
Han, F., E. Ganju, M. Prezzi, R. Salgado, and M. Zaheer. 2019b. “Axial resistance of open-ended pipe pile driven in gravelly sand.” Géotechnique 70 (2): 138–152. https://doi.org/10.1680/jgeot.18.P.117.
Han, F., E. Ganju, R. Salgado, and M. Prezzi. 2018a. “Effects of interface roughness, particle geometry, and gradation on the sand–steel interface friction angle.” J. Geotech. Geoenviron. Eng. 144 (12): 04018096. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001990.
Han, F., E. Ganju, R. Salgado, and M. Prezzi. 2019c. “Comparison of the load response of closed-ended and open-ended pipe piles driven in gravelly sand.” Acta Geotech. 14 (6): 1785–1803. https://doi.org/10.1007/s11440-019-00863-1.
Han, F., E. Ganju, R. Salgado, and M. Prezzi. 2020. “Static load test on open-ended pipe pile using double-wall instrumentation.” In Geo-Congress 2020, Geotechnical Special Publication 315, edited by J. P. Hambleton, R. Makhnenko, and A. S. Budge, 73–81. Reston, VA: ASCE.
Han, F., E. Ganju, R. Salgado, M. Prezzi, and M. Zaheer. 2019d. Experimental study of the load response of large diameter closed-ended and open-ended pipe piles installed in alluvial soil. Rep. No. No. FHWA/IN/JTRP-2019/03. West Lafayette, IN: Purdue University. https://doi.org/10.5703/1288284316880.
Han, F., M. Prezzi, and R. Salgado. 2018b. “Static and dynamic pile load tests on closed-ended driven pipe pile.” In Proc., Int. Foundations Congress and Equipment Exposition (IFCEE 2018), Geotechnical Special Publication 294, edited by M. T. Suleiman, A. Lemnitzer, and A. W. Stuedlein, 496–506. Reston, VA: ASCE.
Han, F., M. Prezzi, R. Salgado, and M. Zaheer. 2017. “Axial resistance of closed-ended steel-pipe piles driven in multilayered soil.” J. Geotech. Geoenviron. Eng. 143 (3): 04016102. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001589.
Meyerhof, G. G. 1976. “Bearing capacity and settlement of pile foundations.” J. Geotech. Eng. Div. 102 (3): 197–228. https://doi.org/10.1061/AJGEB6.0000243.
Meyerhof, G. G. 1983. “Scale effects of ultimate pile capacity.” J. Geotech. Eng. 109 (6): 797–806. https://doi.org/10.1061/(ASCE)0733-9410(1983)109:6(797).
Paik, K., R. Salgado, J. Lee, and B. Kim. 2003. “Behavior of open- and closed-ended piles driven into sands.” J. Geotech. Geoenviron. Eng. 129 (4): 296–306. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:4(296).
Phoon, K., and F. Kulhawy. 1999. “Characterization of geotechnical variability.” Can. Geotech. J. 36 (4): 612–624. https://doi.org/10.1139/t99-038.
Rausche, F. 2000. “Pile driving equipment: Capabilities and properties.” Keynote Lecture In Proc., 16th Int. Conf. on the Application of Stress-Wave Theory to Piles, 75–89. Rotterdam, Netherlands: A.A. Balkema.
Robertson, P. K., R. G. Campanella, and A. Wightman. 1983. “SPT-CPT correlations.” J. Geotech. Eng. 109 (11): 1449–1459. https://doi.org/10.1061/(ASCE)0733-9410(1983)109:11(1449).
Salgado, R. 2008. The engineering of foundations. New York: McGraw-Hill.
Salgado, R., Y. Zhang, G. Abou-Jaoude, D. Loukidis, and V. Bisht. 2017. “Pile driving formulas based on pile wave equation analyses.” Comput. Geotech. 81 (Jan): 307–321. https://doi.org/10.1016/j.compgeo.2016.09.004.
Tucker, L. M., and J. L. Briaud. 1988. Analysis of pile load tests at Lock and Dam 26. Washington, DC: US Army Corps of Engineers.
Van der Veen, C. 1953. “The bearing capacity a pile.” In Vol. II of Proc., 3rd Int. Conf. on Soil Mechanics and Foundation Engineering, 84–90. Zurich, Switzerland: Organizing Committee ICOSO.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Nov 23, 2020
Accepted: Mar 9, 2021
Published online: May 25, 2021
Published in print: Aug 1, 2021
Discussion open until: Oct 25, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.