Stability and Stress-Deformation Analyses of Reinforced Slope Failure at Yeager Airport
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 147, Issue 3
Abstract
This paper describes the material properties along with the inverse limit-equilibrium and permanent deformation analyses used to investigate the 2015 reinforced slope failure at the Yeager Airport near Charleston, West Virginia. Inverse two-dimensional (2D) limit-equilibrium analyses were first performed to evaluate laboratory-derived strength parameters, slope geometry, and soil reinforcement configuration that would reproduce the observed critical failure surface. Because of the shape of the reinforced soil slope (RSS) (outside radius), the impact of the direction of the uniaxial geogrid reinforcement, varying from parallel to almost perpendicular to the direction of sliding, was analyzed using a three-dimensional (3D) limit-equilibrium analysis. Finite-difference permanent deformation analyses were also conducted to understand the internal stresses and deformations of the RSS prior to failure and kinematics of the slope failure. The results of these various analyses are consistent with postfailure field observations and demonstrate the value of performing multiple types of analyses, e.g., 2D and 3D limit-equilibrium and permanent deformation analyses, when analyzing a complex slope failure.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available from the first author by request.
Acknowledgments
The contents and views in this paper are those of the individual authors and do not necessarily reflect those of any of the represented corporations, contractors, agencies, consultants, organizations, and/or contributors including Yeager Airport. The authors would like to thank RocScience Inc. for providing access to the SLIDE3 software for this study and their technical support. The authors also acknowledge the assistance of Enok Cheon, who performed the 3D stability analyses using SLIDE3 while a graduate research assistant at the University of Illinois at Urbana-Champaign. The third author also appreciates the financial support of the National Science Foundation (NSF Award CMMI-1562010). The contents and views in this paper are those of the individual authors and do not necessarily reflect those of the National Science Foundation.
References
Akhtar, K., and T. D. Stark. 2017. “Importance of side resistance in a 3D stability analysis.” In Geotechnical Frontiers 2017: Walls and Slopes, Geotechnical Special Publication 278, edited by T. L. Brandon and R. J. Valentine, 285–293. Reston, VA: ASCE.
Arellano, W. D., and T. D. Stark. 2000. “Importance of three-dimensional slope stability analyses in practice.” In Slope Stability 2000: Proc., Sessions of Geo-Denver, Geotechnical Special Publication 101, edited by D. V. Griffiths, G. A. Fenton, and T. R. Martin, 18–32. Reston, VA: ASCE.
Berg, R. R., V. E. Chouery-Curtis, and C. H. Watson. 1989. “Critical failure planes in analysis of reinforced slopes.” In Proc., Geosynthetics ′89 Conf., 269–278. San Diego: Industrial Fabrics Association International.
Berg, R. R., J. G. Collin, T. P. Taylor, and C. F. Watts. 2020. “Case history on failure of a 67 M tall reinforced soil slope.” Geotext. Geomembr. 48 (6): 802–811. https://doi.org/10.1016/j.geotexmem.2020.06.003.
Cheng, Y. M., and C. J. Yip. 2007. “Three-dimensional asymmetrical slope stability analysis extension of Bishop’s, Janbu’s, and Morgenstern–Price’s techniques.” J. Geotech. Geoenviron. Eng. 133 (12): 1544–1555. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:12(1544).
Huang, C., C. Tsai, and Y. Chen. 2002. “Generalized method for three-dimensional slope stability analysis.” J. Geotech. Geoenviron. Eng. 128 (10): 836–848. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:10(836).
Itasca Consulting Group. 2018. “FLAC: Fast Lagrangian analysis of continuum software and user’s guide.” Accessed April 22, 2018. https://www.itascacg.com/software/FLAC.
Janbu, N. 1954. Stability analysis of slopes with dimensionless parameters. Cambridge, MA: Harvard Univ.
Lade, P. V. 2010. “The mechanics of surficial failure in soil slopes.” Eng. Geol. 114 (1–2): 57–64. https://doi.org/10.1016/j.enggeo.2010.04.003.
Lostumbo, J. 2010. “Yeager Airport runway extension: Tallest known 1H:1V slope in US.” In Proc., Geo-Institute Specialty Conf., GeoFlorida 2010: Advances in Analysis, Modeling & Design, 2502–2510. Reston, VA: ASCE.
Mesri, G., and M. Shahien. 2003. “Residual shear strength mobilized in first-time slope failures.” J. Geotech. Geoenviron. Eng. 129 (1): 12–31. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:1(12).
Rocscience. 2017. SLIDE3: Three-dimensional slope stability software and user’s guide. Toronto: Rocscience.
Rocscience. 2018. SLIDE: Two-dimensional slope stability software and user’s guide. Toronto: Rocscience.
Seed, R., J. Mitchell, and M. Chang. 1993. “The Kettleman Hills landfill failure: A retrospective view of the failure investigations and lessons learned.” Accessed January 20, 2018. https://scholarsmine.mst.edu/cgi/viewcontent.cgi?article=2264&context=icchge.
Seed, R. B., J. K. Mitchell, and H. B. Seed. 1990. “Kettleman Hills waste landfill slope failure. II: Stability analysis.” J. Geotech. Eng. 116 (4): 669–690. https://doi.org/10.1061/(ASCE)0733-9410(1990)116:4(669).
Spencer, E. 1967. “A method of analysis of the stability of embankments assuming parallel inter-slice forces.” Géotechnique 17 (1): 11–26. https://doi.org/10.1680/geot.1967.17.1.11.
Stark, T. D., and H. T. Eid. 1997. “Slope stability analyses in stiff fissured clays.” J. Geotech. Geoenviron. Eng. 123 (4): 335–343. https://doi.org/10.1061/(ASCE)1090-0241(1997)123:4(335).
Stark, T. D., and H. T. Eid. 1998. “Performance of three-dimensional slope stability methods in practice.” J. Geotech. Geoenviron. Eng. 124 (11): 1049–1060. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:11(1049).
Stark, T. D., and D. G. Ruffing. 2018. “Selecting minimum factors of safety for 3D slope stability analyses.” In Geo-Risk 2017: Reliability-Based Design and Code Developments, Geotechnical Special Publication 283, edited by J. Huang, G. A. Fenton, L. Zhang, and D. V. Griffiths, 259–266. Reston, VA: ASCE.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Apr 1, 2020
Accepted: Sep 15, 2020
Published online: Dec 28, 2020
Published in print: Mar 1, 2021
Discussion open until: May 28, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.