Fracturing Pressure in Clay
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 140, Issue 2
Abstract
Hydraulic fracturing in clayey soils can be triggered by either tensile or shear failure. In this paper, the physical meanings of various equations to predict fracture initiation pressure proposed in the past are discussed using the cavity expansion theory. In particular, when fracturing pressure is plotted against initial confining pressure, published laboratory test results as well as analytical models show a linear relationship. When the slope is close to 2, fracture is initiated by tensile failure of the clay, whereas when the slope is close to 1, it is initiated by shear failure of the clay. In this study, the analytical models, validated only on laboratory test data to date, were applied to unique data from field grouting work in which extensive soil fracturing was carried out to improve the mechanical characteristics of the soft silty clay underlying a bell tower in Venice, Italy. By a careful assessment of initial confining pressure in the field, the variation in recorded injection pressures with confining pressure was examined. Results suggest that the fractures at this site were likely to be initiated by shear failure of the clay, and the values were similar to what was predicted by the model with the shear failure criterion.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alfaro, M. C., and Wong, R. C. K. (2001). “Laboratory studies on fracturing of low-permeability soils.” Can. Geotech. J., 38(2), 303–315.
Andersen, K. H., Rawlings, C. G., Lunne, T. A., and By, T. H. (1994). “Estimation of hydraulic fracture pressure in clay.” Can. Geotech. J., 31(6), 817–828.
Atkinson, J. H., Charles, J. A., and Mhach, H. K. (1994). “Undrained hydraulic fracture in cavity expansion tests.” Proc., 13th Int. Conf. on Soil Mechanics and Foundation Engineering, Vol. 3, Oxford & IBH, New Delhi, India, 1009–1012.
Au, S. K. A., Soga, K., Jafari, M. R., Bolton, M. D., and Komiya, K. (2003). “Factors ecting long-term efficiency of compensation grouting in clays.” J. Geotech. Geoenviron. Eng., 254–262.
Bezuijen, A., te Grotenhuis, R., van Tol, A., Bosch, J., and Haasnoot, J. (2011). “Analytical model for fracture grouting in sand.” J. Geotech. Geoenviron. Eng., 611–620.
Bjerrum, L., Nash, J. K. T. L., Kennard, R. M., and Gibson, G. E. (1972). “Hydraulic fracturing in field permeability testing.” Geotechnique, 22(2), 319–332.
Decker, R. A., and Clemence, S. P. (1981). “Laboratory study of hydraulic fracturing in clay.” Proc., 10th Int. Conf. on Soil Mechanics and Foundation Engineering, Vol. 1, Balkema, Rotterdam, Netherlands, 573–575.
Fukushima, S. (1986). “Hydraulic fracturing criterion in the core of fill dams.” Rep. of Fujita Kogyo Technical Institute, No. 22, 131–136.
Gottardi, G., Cavallari, L., and Marchi, M. (2008). “Soil fracturing of soft silty clays for the reinforcement of a bell tower foundation.” Proc., 2nd Int. Workshop on Geotechnics of Soft Soils – Focus on Ground Improvement, Taylor & Francis, London, 31–41.
Gottardi, G., Marchi, M., Lionello, A., and Rossi, P. P. (2013). “Preservation and monitoring of the Frari bell tower in Venice.” 2nd TC301 Int. Symp. on Geotechnical Engineering for the Preservation of Monuments and Historic Sites, CRC Press/Balkema, Taylor & Francis, London, 411–424.
Jaworski, G. W., Seed, H. B., and Duncan, J. M. (1981). “Laboratory study of hydraulic fracturing.” J. Geotech. Engrg. Div., 107(6), 713–732.
Lionello, A., ed. (2008). Il campanile di Santa Maria Gloriosa dei Frari in Venezia – Conoscenza, consolidamento e restauro, Electa, Milan, Italy (in Italian).
Lionello, A., et al. (2004). “Preliminary investigation and monitoring for the design of a strengthening intervention on the Frari basilica, Venice. Possibilities of numerical and experimental techniques.” Proc., IV Int. Seminar on Structural Analysis of Historical Constructions (SAHC), Taylor & Francis, London, 1323–1333.
Lo, K. Y., and Kaniaru, K. (1990). “Hydraulic fracture in earth and rock fill dams.” Can. Geotech. J., 27(4), 496–506.
Massarsch, K. R. (1978). “New aspects of soil fracturing in clay.” J. Geotech. Engrg. Div., 104(8), 1109–1123.
Medeiros, C. H., and Moffat, A. I. B. (1996). “A hydraulic fracturing test based on radial seepage in the Rowe consolidation cell.” Proc., Int. Conf. on Advances in Site Investigation Practice, Thomas Telford, London, 828–839.
Mitchell, J. K., and Soga, K. (2005). Fundamentals of soil behavior, 3rd Ed., Wiley, London.
Mori, A., and Tamura, M. (1987). “Hydrofracturing pressure of cohesive soils.” Soils Found., 27(1), 14–22.
Ng, M. Y. A. (2008). “Modelling of hydraulic fracturing in cement bentonite geomaterials.” Ph.D. thesis, Cambridge Univ., Cambridge, U.K.
Overy, R. F., and Dean, A. R. (1986). “Hydraulic fracture testing of cohesive soil.” Proc., 18th Offshore Technology Conf. v3, Houston, 45–53.
Panah, A. K., and Yanagisawa, E. (1989). “Laboratory studies on hydraulic fracturing criteria in soil.” Soils Found., 29(4), 14–22.
Soga, K., Ng, M. Y. A., and Gafar, K. (2005). “Soil fractures in grouting.” Proc., 11th Int. Congress on Computer Methods and Advances in Geomechanics, Turin, Italy, 397–406.
Vaughan, P. R. (1971). The use of hydraulic fracturing tests to detect crack formation in embankment dam cores, Interim Rep., Dept. of Civil Engineering, Imperial College, London.
Vesic, A. S. (1972). “Expansion of cavities in infinite soil mass.” J. Soil Mech. and Found. Div., 98(3), 265–290.
Warner, J. (2004). Practical handbook of grouting – Soil, rock and structures, Wiley, Hoboken, NJ.
Yanagisawa, E., and Panah, A. K. (1994). “Two dimensional study of hydraulic fracturing criteria in cohesive soil.” Soils Found., 34(1), 1–9.
Zervos, A., Papanastasiou, P., and Vardoulakis, I. (2008). “Shear localisation in thick-walled cylinders under internal pressure based on gradient elastoplasticity.” J. Theor. Appl. Mech., 38(1–2), 81–100.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jun 13, 2012
Accepted: Aug 5, 2013
Published online: Aug 7, 2013
Published in print: Feb 1, 2014
Discussion open until: Apr 18, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.