Design Procedure and Considerations for Piers in Expansive Soils
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 138, Issue 8
Abstract
The design of pier foundations in expansive soils is an important and challenging aspect of geotechnical engineering. Established methods for pier analysis include rigid and elastic methods. These methods have certain limitations that restrict their applicability to evaluate certain complex aspects of pier heave, including variable soil profiles, complex wetting profiles, large length-to-diameter ratios, and complex pier configurations and materials. To address those limitations, a method of analysis was developed providing a versatile and robust tool to predict both pier heave and axial forces developed by expansive soils. This method utilizes a standard finite-element code to solve for pier heave and force in the pier for the given boundary conditions. This paper contains both a discussion of the general design procedure and the finite-element formulation. This design procedure, including the finite-element code, accurately determines pier heave and force in a pier compared with field-measured data. The design procedure and the finite-element code in particular, address the limitations of the established rigid and elastic pier analysis methods with the flexibility to evaluate complex design situations. A comparison with field-measured pier heave and tensile force in the pier demonstrates that the design procedure accurately models both the magnitude of pier heave and force in the pier. The results obtained using this design procedure have been compared with those obtained using the established pier analysis methods for simplified drilled pier examples. The comparison of the various methods of analysis demonstrates that the finite-element design procedure predicts pier heave values that are generally less than the existing elastic and rigid pier analysis methods. It is believed that the proposed design method is more realistic and provides a design tool with improved accuracy compared with existing methods.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abdel-Halim, M. A. H., and Al-Qasem, M. M. (1995). “Model studies on bored piles in stiff expansive clay.” Int. J. Struct.IJOSD8, 15(1), 35–59.
Abshire, M. S. (2002). “Differential moisture migration and heave beneath slabs over dipping expansive shale.” M.S. thesis, Colorado State Univ., Fort Collins, CO.
Al-Rawas, A. A., and Goosen, M. F. A. (2006). Expansive soils: Recent advances in characterization and treatment, Taylor & Francis, London.
Amir, J. M., and Sokolov, M. (1976). “Finite element analysis of piles in expansive media.” J. Geotech. Engrg. Div.AJGEB6, 102(7), 701–719.
Attwooll, B., Reins, J., and Lykosh, P. (2006). “Heave at manufacturing facility: Observations and response.” Proc., 4th Int. Conf. on Unsaturated Soils, ASCE, Reston, VA, 147(1), 323–346.
Ballouz, M. (2005). “Micropiling in karstic rock: New CMFF foundation solution applied at the Sanita factory.” Proc, 10th Multidisciplinary Conf. on Sinkholes and the Engineering and Environmental Impacts of Karst, ASCE, Reston, VA, 311–321.
Benvenga, M. M. (2005). “Pier-soil adhesion factor for drilled shaft piers in expansive soil.” Master’s thesis, Colorado State Univ., Fort Collins, CO.
Chao, K. C. (2007). “Design principles for foundations on expansive soils.” Ph.D. dissertation, Colorado State Univ., Fort Collins, CO.
Chapel, T. A. (1998). “Field investigation of helical and concrete piers in expansive soils.” M.S. thesis, Colorado State Univ., Fort Collins, CO.
Chen, F. H. (1965). “The use of piers to prevent the uplift of lightly loaded structures founded on expansive soils.” Proc., Int. Conf. on Expansive Soils, Texas A&M Press, College Station, TX.
Chen, F. H. (1988). Foundations on expansive soils, Elsevier, New York.
Colorado Association of Geotechnical Engineers (CAGE). (1999). “Commentary on geotechnical practices, drilled pier design criteria for lightly loaded structures in the Denver metropolitan area.” CAGE Professional Practice Committee, Glendale, CO.
Desai, C. S., Zaman, M. M., Lightner, J. G., and Siriwardane, H. J. (1984). “Thin-layer elements for interfaces and joints.” Int. J. Numer. Anal. Methods Geomech.IJNGDZ, 8, 19–43.
Durkee, D. B. (2000). “Active zone depth and edge moisture variation distance in expansive soils.” Ph.D. dissertation, Colorado State Univ., Fort Collins, CO.
Federal Highway Administration (FHWA). (2005). “Micropile design and construction.” Publication No. FHWA NHI-05-039, Federal Highway Administration, Washington, DC.
Feng, J., Zhou, D.-P., Jiang, N., and Yang, T. (2006). “A model for calculation of internal force of micropile system to reinforce bedding rock slope.” Chin. J. Rock Mech. Eng., 25(2), 284–288.
Fredlund, D. G., Hasan, J. U., and Filson, H. (1980). “The prediction of total heave.” Proc., 4th Int. Conf. on Expansive Soils, ASCE, Reston, VA, 1–11.
Fredlund, D. G., Morgenstern, N. R., and Widger, R. A. (1978). “The shear strength of unsaturated soils.” Can. Geotech. J.CGJOAH, 15(3), 313–321.
Fredlund, D. G., and Rahardjo, H. (1993). Soil mechanics for unsaturated soils, Wiley, New York.
Goode, J. C. (1982). “Heave prediction and moisture migration beneath slabs on expansive soils.” M.S. thesis, Colorado State Univ., Fort Collins, CO.
Hong, G. T. (2008). “Earth pressures and deformations in civil infrastructure in expansive soils.” Ph.D. dissertation, Texas A&M Univ., College Station, TX.
Justo, J. L., Saura, J., Rodrifuez, J. E., Delgado, A., and Jaramillo, A. (1984). “A finite element method to design and calculate pier foundations in expansive soils.” Proc., 5th Int. Conf. on Expansive Soils, Academic Press, Jerusalem, 119–123.
Katona, M. G. (1983). “A simple contact-friction interface element with applications to buried culverts.” Int. J. Numer. Anal. Methods Geomech.IJNGDZ, 7(3), 371–384.
Kaufmann, K. L., Nielsen, B. N., and Augustesen, A. H. (2010). “Finite element investigations on the interaction between a pile and swelling clay.” Tech. Rep. No. 104, Dept. of Civil Engineering, Aalborg Univ., Aalborg, Denmark.
Kim, M. H. (1996). “Effect of an expansive clay on the behavior of drilled shafts.” Ph.D. dissertation, Univ. of Houston, Houston.
Kim, M. H., and O’Neill, M. W. (1998). “Side shear induced in drilled shaft by suction change.” J. Geotech. Geoenviron. Eng., 124(8), 771–780.
Lambe, T. W., and Whitman, R. V. (1969). “Soil mechanics.” General aspects of drained stress-strain behavior, Wiley, New York, 300.
Lytton, R. L. (1977). “Foundations in expansive soils.” Numerical methods in geotechnical engineering, Desai, C. S. and Christian, J. T., eds., McGraw Hill, New York, 427–457.
McKeen, R. G. (1992). “A model for predicting expansive soil behavior.” Proc., 7th Int. Conf. on Expansive Soils, Texas University Press, Lubbock, TX, 1–6.
Miller, D. J., Durkee, D. B., Chao, K. C., and Nelson, J. D. (1995). “Simplified heave prediction for expansive soils.” Proc., Unsaturated Soils Conf., A.A. Balkema, Rotterdam, The Netherlands, 891–897.
Mohamedzein, Y. E. A., Mohamed, M. G., and Sharief, A. M. E. (1999). “Finite element analysis of short piles in expansive soils.” Comput. Geotech.CGEOEU, 24(3), 231–243.
Mohamedzein, Y. E. A., and Nour Eldayem, F. E. (2006). “The effect of interface on the performance of piles in expansive soils.” Proc., 10th Arab Struct. Eng. Conf., Kuwait Univ., Kuwait, 13–15.
Nelson, J. D., and Chao, K. C. (2010). “Depth of investigation for expansive soils.” Proc., 17th Southeast Asian Geotech. Conf., Taiwan Geotechnical Society, Taipei, Taiwan.
Nelson, J. D., Chao, K. C., and Overton, D. D. (2007). “Design of pier foundations on expansive soils.” Proc., 3rd Asian Conf. on Unsaturated Soils, Science Press, Beijing.
Nelson, J. D., Chao, K. C., and Overton, D. D. (2008). “Modeling vadose zone water migration based on downhole nuclear gauge data.” Proc., 3rd Int. Conf. on Site Characterization, Taiwan Geotechnical Society, Taipei, Taiwan.
Nelson, J. D., and Miller, D. J. (1992). Expansive soils. Problems and practice in foundation and pavement engineering, Wiley, New York.
Nelson, J. D., Reichler, D. K., and Cumbers, J. M. (2006). “Parameters for heave prediction by oedometer tests.” Proc,. 4th Int. Conf. on Unsaturated Soils, ASCE, Reston, VA, 951–961.
Noorzad, R., and Saghaee, G. R. (2009). “Seismic analysis of inclined micropiles using numerical methods.” Proc., Int. Foundation Congress and Equipment Expo on Contemporary Topics in Deep Foundations, ASCE, Reston, VA, 406–413.
O’Neill, M. W. (1988). “Adaptive model for drilled shafts in expansive clay.” Proc., Geotech. Eng. Div. National Convention, ASCE, New York, 1–22.
O’Neill, M. W., and Poormoayed, N. (1980). “Methodology for foundations on expansive clays.” J. Geotech. Engrg. Div.AJGEB6, 106(12), 1345–1367.
Osman, M., and Elsharief, A. M. (1999). “Field experiments on piles in the expansive soils of central Sudan.” Build. Road Res. J.BREIEA, 2, 17–26.
Overton, D. D., Chao, K. C., and Nelson, J. D. (2006). “Time rate of heave prediction for expansive soils.” Proc., GeoCongress: Geotechnical Engineering in the Information Technology Age, ASCE, Reston, VA.
Overton, D. D., Chao, K. C., and Nelson, J. D. (2007). “Heave distress of a manufacturing building.” Proc., Geo-Denver 2007: Contemporary Issues in Deep Foundations, ASCE, Reston, VA.
Overton, D. D., Chao, K. C., and Nelson, J. D. (2010). “Water content profiles for design of foundations on expansive soils.” Proc., 5th Int. Conf. on Unsaturated Soils, CRC Press, London.
Picornell, M., Ferregut, C., Gowdappa, H., and Behar, J. (1993). “Data base for the design of piers in expansive soil.” Unsaturated Soils: Proc., 1993 ASCE National Convention and Exposition, Houston, S. L. and Wray, W. K., eds., ASCE, New York, 211–222.
Porter, A. A. (1977). “The mechanics of swelling in expansive clays.” M.S. thesis, Colorado State Univ., Fort Collins, CO.
Poulos, H. G., and Davis, E. H. (1980). Pile foundation analysis and design, Wiley, New York.
Reichler, D. K. (1997). “Investigation of variation in swelling pressure values for an expansive soil.” M.S. thesis, Colorado State Univ., Fort Collins, CO.
Russo, G. (2004). “Full-scale load tests on instrumented micropiles.” Proc. Inst. Civ. Eng. Geotech. Eng.PICGEH, 157(3), 127–135.
Russo, G., and Viggiani, C. (2003). “Full scale load tests on instrumented micropiles: Technology and behavior.” Proc., BGA Int. Conf. on Foundations, Innovations, Observations, Design and Practice, Thomas Telford, London, 777–786.
Sadek, M., and Isam, S. (2004). “Three-dimensional finite element analysis of the seismic behavior of inclined micropiles.” Soil Dyn. Earthquake Eng.IJDEDD, 24(6), 473–485.
Sadek, M., and Shahrour, I. (2006). “Influence of the head and tip connection on the seismic performance of micropiles.” Soil Dyn. Earthquake Eng.IJDEDD, 26(5), 461–468.
Shahrour, I., and Juran, I. (2004). “Seismic behavior of micropile systems.” Ground Improv., 8(3), 109–120.
Shahrour, I., Sadek, M., and Ousta, R. (2001). “Seismic behavior of micropiles used as foundation support elements, three-dimensional finite element analysis.” Transportation Research Record 1772, Transportation Research Board, Washington, DC, 84–90.
Sivakumar Babu, G. L., Srinvasa, M. B., Murthy, B. S. N., and Nataraj, M. S. (2004). “Bearing capacity improvement using micropiles: A case study.” Proc., GeoSupport 2004: Drilled Shafts, Micropiling, Deep Mixing, Remedial Methods, and Specialty Foundation, ASCE, Reston, VA, 692–699.
Sorochan, E. A. (1991). Construction of buildings on expansive soils, A. A. Balkema, Brookfield, VT.
Thompson, E. G. (2005). An introduction to the finite element method: Theory, programming, and applications, Wiley, Hoboken, NJ.
U.S. Army Corps of Engineers. (1983). Technical manual TM 5-818-7, Foundations in Expansive Soils, Washington, DC.
Wang, H., Zhou, D., and Jiang, J. (2009a). “Stability of compression piles in micropile unit.” Proc., 2nd Int. Conf. on Transportation Eng., ASCE, Reston, VA, 997–1002.
Wang, Z., Mei, G., Cai, G., and Yu, X. (2009b). “Dynamic finite element analysis of micropile foundation in subgrade.” Proc., Recent Advances in Soil Behavior, In Situ Test Methods, Pile Foundations, and Tunneling, ASCE, Reston, VA, 139–144.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 138 • Issue 8 • August 2012
Pages: 945 - 956
Copyright
© 2012. American Society of Civil Engineers.
History
Received: Sep 21, 2010
Accepted: Oct 18, 2011
Published online: Oct 20, 2011
Published in print: Aug 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.