Bayesian Probabilistic Approach for the Correlations of Compression Index for Marine Clays
This article has been corrected.
VIEW CORRECTIONPublication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 135, Issue 12
Abstract
The compression index is an important soil property that is essential to many geotechnical designs. Over the decades, a number of empirical correlations have been proposed to relate the compressibility to other soil index properties, such as the liquid limit, plasticity index, in situ water content, void ratio, specific gravity, etc. The reliability and thus predictability of these correlations are always being questioned. Moreover, selection between simple and complicated models is a difficult task and often depends on subjective judgments. A more complicated model obviously provides “better fit” to the data but not necessarily offers an acceptable degree of robustness to measurement noise and modeling error. In the present study, the Bayesian probabilistic approach for model class selection is used to revisit the empirical multivariate linear regression formula of the compression index. The criterion in the formula structure selection is based on the plausibility of a class of formulas conditional on the measurement, instead of considering the likelihood only. The plausibility balances between the data fitting capability and sensitivity to measurement and modeling error, which is quantified by the Ockham factor. The Bayesian method is applied to analyze a data set of 795 records, including the compression index and other well-known geotechnical index properties of marine clay samples collected from various sites in South Korea. It turns out that the correlation formula linking the compression index to the initial void ratio and liquid limit possesses the highest plausibility among a total of 18 candidate classes of formulas. The physical significance of this most plausible correlation is addressed. It turns out to be consistent with previous studies and the Bayesian method provides the confirmation from another angle.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers would like to acknowledge the Fundo para o Desenvolvimento das Ciencias e da Tecnologia (FDCT), Macau SAR government (Grant No. UNSPECIFIED013/2006/A1), and the Ministry of Land, Transport, and Marine Affairs of South Korea (Grant No. UNSPECIFIEDPM-54100) for the financial assistances.
References
Al-Khafaji, A. W. N., and Andersland, O. B. (1992). “Equations for compression index approximation.” J. Geotech. Engrg., 118(1), 148–153.
Azzouz, A. S., Krizek, R. J., and Corotis, R. B. (1976). “Regression analysis of soil compressibility.” Soils Found., 16(2), 19–29.
Beck, J. L., and Katafygiotis, L. S. (1998). “Updating models and their uncertainties. I: Bayesian statistical framework.” J. Eng. Mech., 124(4), 455–461.
Beck, J. L., and Yuen, K. -V. (2004). “Model selection using response measurements: Bayesian probabilistic approach.” J. Eng. Mech., 130(2), 192–203.
Cox, R. T. (1961). The algebra of probable inference, Johns Hopkins Press, Baltimore.
Giasi, C. I., Cherubini, C., and Paccapelo, F. (2003). “Evaluation of compression index of remoulded clays by means of Atterberg limits.” Bull. Eng. Geol. Environ., 62, 333–340.
Gull, S. F. (1988). “Bayesian inductive inference and maximum entropy.” Maximum entropy and Bayesian methods, J. Skilling, ed., Kluwer Academic, Boston, 53–74.
Rendon-Herrero, O.(1983). “Universal compression index equation: Closure.” J. Geotech. Engrg., 109(5), 755–761.
Koppula, S. D. (1981). “Statistical estimation of compression index.” Geotech. Test. J., 4(2), 68–73.
Kulhawy, F. H., and Mayne, P. W. (1990). “Manual on estimating soil properties for foundation design.” Final Rep. Project No. 1493-6, EL-6800, Electric Power Research Institute, Palo Alto, Calif.
Lambe, T. W., and Whitman, R. V. (1969). Soil mechanics, Wiley, New York.
Lee, K., Choa, V., Lee, S. H., and Quek, S. H. (1993). “Constant rate of strain consolidation of Singapore marine clay.” Geotechnique, 43(3), 471–488.
Mayne, P. W. (1980). “Cam-clay predictions of undrained strength.” J. Geotech. Engrg. Div., 106(11), 1219–1242.
Nakase, A., Kamei, T., and Kusakabe, O. (1988). “Constitutive parameters estimated by plasticity index.” J. Geotech. Engrg. Div., 114(7), 844–858.
Nishida, Y. (1956). “A brief note on compression index of soil.” Journal of Soil Mechanics and Foundation Engineering, 82(3), 1–14.
Papadimitriou, C., Beck, J. L., and Katafygiotis, L. S. (1997). “Asymptotic expansions for reliability and moments of uncertain systems.” J. Eng. Mech., 123(12), 1219–1229.
Schofield, A. N., and Wroth, C. P. (1968). Critical state soil mechanics, McGraw-Hill, New York.
Sheahan, T. C., and Watters, P. J. (1996). “Using an automated Rowe cell for constant rate strain of consolidation testing.” Geotech. Test. J., 19(4), 354–363.
Skempton, A. W., and Jones, O. T. (1944). “Notes on the compressibility of clays.” Q. J. Geol. Soc. Lond., 100(2), 119–135.
Sridharan, A., and Nagaraj, H. B. (2000). “Compressibility behaviour of remoulded, fine-grained soils and correlation with index properties.” Can. Geotech. J., 37(3), 712–722.
Yin, J. H. (1999). “Properties and behaviour of Hong Kong marine deposits with different clay contents.” Can. Geotech. J., 36(6), 1085–1095.
Yoon, G. L., Kim, B. T., and Jeon, S. S. (2004). “Empirical correlations of compression index for marine clay from regression analysis.” Can. Geotech. J., 41(6), 1213–1221.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Dec 9, 2008
Accepted: May 11, 2009
Published online: Nov 13, 2009
Published in print: Dec 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.