Numerical Simulation of the Shear Behavior of Rock Joints Filled with Unsaturated Soil
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: International Journal of Geomechanics
Volume 18, Issue 9
Abstract
Weak infilled discontinuities commonly exist in rock masses, in which the infill degree of saturation largely influences the overall joint shear behavior and ground stability. However, so far, research on the shear of infilled joints at unsaturated conditions is rare, especially those performed in numerical simulation. To the authors’ knowledge, no attempts have been made to investigate the shear-induced variations in unsaturated soil parameters, which are vital for proposing the infilled-joint constitutive models. For the first time, a series of constant water content direct shear tests on the unsaturated infilled-joint soil were conducted using the numerical software Fast Lagrangian Analysis of Continua (FLAC)/Two-Phase Flow. Intrinsic soil-water retention and permeability models were updated in the FISH subroutine to consider porosity. Results highlight the disadvantage of the built-in models in FLAC. Initial infill saturation and other factors, including physical shear rate, joint roughness, infill thickness, and normal stress, all showed effects on the joint shear strength consistent with literature reports. Shear-induced variations in the mean values of Bishop effective stress and permeability of the infill layer were emphasized.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The financial support provided by the China Scholarship Council [Grant No. 201406420027] and University of Wollongong for the first author is greatly appreciated.
References
Alonso, E. E., M. T. Zandarín, and S. Olivella. 2013. “Joints in unsaturated rocks: Thermo-hydro-mechanical formulation and constitutive behaviour.” J. Rock Mech. Geotech. Eng. 5 (3): 200–213. https://doi.org/10.1016/j.jrmge.2013.05.004.
ASTM. 2016. Standard test method for performing laboratory direct shear strength tests of rock specimens under constant normal force. ASTM D5607-16. West Conshohocken, PA: ASTM.
Barton, N. 1974. A review of the shear strength of filled discontinuities in rock, 1–38. Oslo, Norway: Norwegian Geotechnical Institute.
Barton, N., and V. Choubey. 1977. “The shear strength of rock joints in theory and practice.” Rock Mech. 10 (1–2): 1–54. https://doi.org/10.1007/BF01261801.
Barton, N., R. Lien, and J. Lunde. 1974. “Engineering classification of rock masses for the design of tunnel support.” Rock Mech. 6 (4): 189–236. https://doi.org/10.1007/BF01239496.
Brady, B. H., and E. T. Brown. 2013. Rock mechanics: For underground mining. Dordrecht, Netherlands: Springer.
Carrier, W. D., and J. F. Beckman. 1984. “Correlations between index tests and the properties of remoulded clays.” Géotechnique 34 (2): 211–228. https://doi.org/10.1680/geot.1984.34.2.211.
Chen, X., J. Zhang, Y. Xiao, and J. Li. 2015. “Effect of roughness on shear behavior of red clay–concrete interface in large-scale direct shear tests.” Can. Geotech. J. 52 (8): 1122–1135. https://doi.org/10.1139/cgj-2014-0399.
Chiu, C. C., M. C. Weng, and T. H. Huang. 2016. “Modeling rock joint behavior using a rough-joint model.” Int. J. Rock Mech. Min. Sci. 89 (Nov): 14–25. https://doi.org/10.1016/j.ijrmms.2016.08.001.
Cho, S. E. 2016. “Stability analysis of unsaturated soil slopes considering water-air flow caused by rainfall infiltration.” Eng. Geol. 211 (Aug): 184–197. https://doi.org/10.1016/j.enggeo.2016.07.008.
Davies, O., M. Rouainia, S. Glendinning, M. Cash, and V. Trento. 2014. “Investigation of a pore pressure driven slope failure using a coupled hydro-mechanical model.” Eng. Geol. 178 (Aug): 70–81. https://doi.org/10.1016/j.enggeo.2014.05.012.
de Toledo, P. E., and M. H. de Freitas. 1993. “Laboratory testing and parameters controlling the shear strength of filled rock joints.” Géotechnique 43 (1): 1–19. https://doi.org/10.1680/geot.1993.43.1.1.
Duriez, J., F. Darve, and F. V. Donzé. 2011. “A discrete modeling-based constitutive relation for infilled rock joints.” Int. J. Rock. Mech. Min. Sci. 48 (3): 458–468. https://doi.org/10.1016/j.ijrmms.2010.09.008.
Gallipoli, D., A. W. Bruno, F. D’onza, and C. Mancuso. 2015. “A bounding surface hysteretic water retention model for deformable soils.” Géotechnique 65 (10): 793–804. https://doi.org/10.1680/jgeot.14.P.118.
Hashem, E., and S. Houston. 2016. “Volume change consideration in determining unsaturated soil properties for geotechnical applications.” Int. J. Geomech. 16 (6): D4015003. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000586.
Indraratna, B., N. I. Aziz, and A. Dey. 2001. “Behaviour of joints containing clay infill under constant normal stiffness, with and without bolting.” Proc. Inst. Div. Eng. Geotech. Eng. 149 (4): 259–267. https://doi.org/10.1680/geng.2001.149.4.259.
Indraratna, B., A. Haque, and N. Aziz. 1999. “Shear behaviour of idealized infilled joints under constant normal stiffness.” Géotechnique 49 (3): 331–355. https://doi.org/10.1680/geot.1999.49.3.331.
Indraratna, B., D. A. F. Oliveira, and E. T. Brown. 2010. “A shear-displacement criterion for soil-infilled rock discontinuities.” Géotechnique 60 (8): 623–633. https://doi.org/10.1680/geot.8.P.094.
Indraratna, B., W. Premadasa, E. T. Brown, A. Gens, and A. Heitor. 2014. “Shear strength of rock joints influenced by compacted infill.” Int. J. Rock Mech. Min. Sci. 70 (Sep): 296–307. https://doi.org/10.1016/j.ijrmms.2014.04.019.
ISRM (International Society for Rock Mechanics). 1981. “Suggested methods for the quantitative description of discontinuities in rock masses.” In Rock characterisation, testing and monitoring–ISRM suggested methods, edited by E. T. Brown, 319–368. Oxford, UK: Pergamon Press.
Itasca Consulting Group. 2011. “ FLAC, fast Lagrangian analysis of continua, version 7.0,” Minneapolis.
Kanji, M. A. 1974. “Unconventional laboratory tests for the determination of the shear strength of soil-rock contacts.” In Vol. 2 of Proc., 3rd Congress of Int. Society of Rock Mechanics, ISRM, Denver, 241–247.
Khosravi, A., A. D. Serej, S. M. Mousavi, and S. M. Haeri. 2016. “Effect of hydraulic hysteresis and degree of saturation of infill materials on the behavior of an infilled rock fracture.” Int. J. Rock Mech. Min. Sci. 88 (Oct): 105–114. https://doi.org/10.1016/j.ijrmms.2016.07.001.
Lu, Y., L. Wang, Z. Li, and H. Sun. 2017. “Experimental study on the shear behavior of regular sandstone joints filled with cement grout.” Rock Mech. Rock Eng. 50 (5): 1321–1336. https://doi.org/10.1007/s00603-016-1154-2.
Ma, S. Q., Z. Y. Zhao, W. Nie, J. Nemcik, Z. Y. Zhang, and X. Zhu. 2017. “Implementation of displacement-dependent Barton–Bandis rock joint model into discontinuous deformation analysis.” Comput. Geotech. 86 (Jun): 1–8. https://doi.org/10.1016/j.compgeo.2016.12.030.
Mašín, D. 2009. “Predicting the dependency of a degree of saturation on void ratio and suction using effective stress principle for unsaturated soils.” Int. J. Numer. Anal. Methods Geomech. 34 (1): 73–90.
Matray, J. M., S. Savoye, and J. Cabrera. 2007. “Desaturation and structure relationships around drifts excavated in the well-compacted Tournemire’s argillite (Aveyron, France).” Eng. Geol. 90 (1–2): 1–16. https://doi.org/10.1016/j.enggeo.2006.09.021.
Muralha, J., G. Grasselli, B. Tatone, M. Blümel, P. Chryssanthakis, and J. Yujing. 2013. “ISRM suggested method for laboratory determination of the shear strength of rock joints: Revised version.” In The ISRM Suggested Methods for Rock Characterization, Testing and Monitoring: 2007–2014, edited by R. Ulusay, 131–42. Cham, Switzerland: Springer.
Phien-Wej, N., U. B. Shrestha, and G. Rantucci. 1990. “Effect of infill thickness on shear behaviour of rock joints.” In Proc., Int. Symp. on Rock Joints, edited by N. Barton and O. Stephansson, 289–294. Rotterdam, Netherlands: AA Balkema.
Ribeiro Heitor, A. P. 2013. “Assessment of post-compaction characteristics of an unsaturated silty sand.” Doctoral thesis, Univ. of Wollongong.
Tarantino, A., and S. Tombolato. 2005. “Coupling of hydraulic and mechanical behaviour in unsaturated compacted clay.” Géotechnique 55 (4): 307–317. https://doi.org/10.1680/geot.2005.55.4.307.
Vanapalli, S. K., D. G. Fredlund, and D. E. Pufahl. 1996. “The relationship between the soil-water characteristic curve and the unsaturated shear strength of a compacted glacial till.” Geotech. Test. J. 19 (3): 259–268. https://doi.org/10.1520/GTJ10351J.
Wu, Q., Y. An, and Q. Q. Liu. 2015. “SPH-based simulations for slope failure considering soil-rock interaction.” Procedia Eng. 102: 1842–1849. https://doi.org/10.1016/j.proeng.2015.01.322.
Yu, Y., and R. Bathurst. 2017. “Influence of selection of soil and interface properties on numerical results of two soil–geosynthetic interaction problems.” Int. J. Geomech. 17 (6): 04016136. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000847.
Yu, Y., I. P. Damians, and R. J. Bathurst. 2015. “Influence of choice of FLAC and PLAXIS interface models on reinforced soil–structure interactions.” Comput. Geotech. 65 (Apr): 164–174. https://doi.org/10.1016/j.compgeo.2014.12.009.
Information & Authors
Information
Published In
International Journal of Geomechanics
Volume 18 • Issue 9 • September 2018
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Sep 29, 2017
Accepted: Apr 11, 2018
Published online: Jul 11, 2018
Published in print: Sep 1, 2018
Discussion open until: Dec 11, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.