Immediate Estimation of Yield Acceleration for Shallow and Deep Failures in Slope-Stability Analyses
This article has been corrected.
VIEW CORRECTIONPublication: International Journal of Geomechanics
Volume 17, Issue 7
Abstract
The accurate assessment of the stability of natural slopes and earth structures during earthquakes is a critical design aspect for seismically active areas. The Newmark-type displacement method, which is capable of estimating permanent earthquake-induced displacements, is extensively adopted to evaluate slope stability under seismic loading. However, this approach becomes unmanageable for regional assessment because hundreds or thousands of iterations are required to obtain the yield acceleration (), which is estimated by trial and error in conventional slope-stability analyses. To reduce computational effort, a simple procedure is developed for the noniterative evaluation of for both shallow and deep slope failures. The factor of safety (FS) of slopes under static conditions is first calculated based on developed stability charts. Thereafter, is determined through its established correlation with FS. The calculated using the proposed procedure corresponds well with that obtained using the trial-and-error approach (5% difference). Thus, the proposed procedure can be applied efficiently in a regional assessment with thousands of slopes.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was supported by the Taiwan National Science Council under Award NSC102-2625-M-005-004. The authors gratefully acknowledge this support.
References
Bray, J. D., and Travasarou, T. (2007). “Simplified procedure for estimating earthquake-induced deviatoric slope displacements.” J. Geotech. Geoenviron. Eng., 381–392.
Duncan, J. M., and Wright, S. G. (1980). “The accuracy of equilibrium methods of slope stability analysis.” Eng. Geol., 16(1–2), 5–17.
Hung, J. J. (2000). “Chi-Chi earthquake induced landslides in Taiwan.” Earthquake Eng. Eng. Seismolog., 2, 25–32.
Jiang, J. C., and Yamagami, T. (2006). “Charts for estimating strength parameters from slips in homogeneous slopes.” Comput. Geotech., 33(6–7), 294–304.
Jibson, R. W. (2007). “Regression models for estimating coseismic landslide displacement.” Eng. Geol., 91(2–4), 209–218.
Jibson, R. W. (2011). “Methods for assessing the stability of slopes during earthquakes—A retrospective.” Eng. Geol., 122(1–2), 43–50.
Keefer, D. K. (1984). “Landslides caused by earthquakes.” Geol. Soc. Am. Bull., 95(4), 406–421.
Keefer, D. K. (2000). “Statistical analysis of an earthquake-induced landslide distribution—The 1989 Loma Prieta, California event.” Eng. Geol., 58(3–4), 231–249.
Kim, J., and Sitar, N. (2004). “Direct estimation of yield acceleration in slop stability analyses.” J. Geotech. Geoenviron. Eng., 111–115.
Klar, A., Aharonov, E., Kalderon-Asael, B., and Katz, O. (2011). “Analytical and observational relations between landslide volume and surface area.” J. Geophys. Res., 116(F2), F02001.
Michalowski, R. L. (2002). “Stability charts for uniform slopes.” J. Geotech. Geoenviron. Eng., 351–355.
Newmark, N. M. (1965). “Effects of earthquakes on dams and embankments.” Géotechnique, 15(2), 139–159.
Saygili, G., and Rathje, E. M. (2008). “Empirical predictive models for earthquake-induced sliding displacements of slopes.” J. Geotech. Geoenviron. Eng., 790–803.
SLOPE/W 2012 [Computer software]. GEO-SLOPE International, Calgary, AB, Canada.
Steward, T., Sivakugan, N., Shukla, S. K., and Das, B. M. (2011). “Taylor’s slope stability charts revisited.” Int. J. Geomech., 384–352.
Sun, J., and Zhao, Z. (2013). “Stability charts for homogenous soil slopes.” J. Geotech. Geoenviron. Eng., 2212–2218.
Taylor, D. W. (1937). “Stability of earth slopes.” Boston Soc. Civ. Eng., 24(3), 197–247.
Tsai, C. C., and Chien, Y. C. (2016). “A general model for predicting the earthquake-induced displacements of shallow and deep slope failures.” Eng. Geol., 206, 50–59.
Yan, L., Matasovic, N., and Kavazanjian, E., Jr. (1996). “Seismic response of a block on an inclined plane to vertical and horizontal excitation acting simultaneously.” Proc., 11th Conf. on Engineering Mechanics, ASCE, Reston, VA, 1110–1113.
Information & Authors
Information
Published In
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Jun 18, 2015
Accepted: Nov 10, 2016
Published online: Jan 19, 2017
Discussion open until: Jun 19, 2017
Published in print: Jul 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.