Simulation of the Effect of Novel Porous Channels and Their Optimizations on the Performance of Direct Ethanol Fuel Cells
Publication: Journal of Energy Engineering
Volume 148, Issue 4
Abstract
The design of a channel has significant effects on mass transfer and water and heat management inside fuel cells. In this study, novel three-dimensional porous channels and their optimizations (coupling design of the geometric structure and surface shape) by the computational fluid dynamics (CFD) method are proposed to improve the comprehensive performance of direct ethanol fuel cells (DEFCs). The overall electrical performance of tubular DEFCs is significantly better than that of parallel channels because of the better capacity for oxygen convection and water removal of three-dimensional (3D) porous channels. Among porous channels of different shapes, the square and triangular shapes were found to perform the best. Through optimization, the oxygen mass transfer capacity was enhanced remarkably owing to better convection, while the velocity distribution was disordered in some cases. The results also indicate that square porous channels and their optimizations have a power density growth rate of 15.99% and 40.86%, respectively, at 0.2 V, compared to parallel channels. Therefore, the square tapered design further improves the pressure drop inside the electrode layers, provides a more uniform distribution of oxygen, and allows liquid water to concentrate at the outlet, and has thus been proven to be the optimal choice.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors acknowledge support from the National Natural Science Fund of China (51876085), the Open Fund of the State Key Laboratory of Reliability for Internal Combustion Engines in China, and China Scholarship Council (CSC). We would like to thank Editage (www.editage.com) for English language editing.
References
Afshari, E. 2020. “Computational analysis of heat transfer in a PEM fuel cell with metal foam as a flow field.” J. Therm. Anal. Calorim. 139 (4): 2423–2434. https://doi.org/10.1007/s10973-019-08354-x.
Afshari, E., M. Mosharaf-Dehkordi, and H. Rajabian. 2017. “An investigation of the PEM fuel cells performance with partially restricted cathode flow channels and metal foam as a flow distributor.” Energy 118 (Jan): 705–715. https://doi.org/10.1016/j.energy.2016.10.101.
Alijanpour sheshpoli, M., S. S. Mousavi Ajarostaghi, and M. A. Delavar. 2018. “Waste heat recovery from a 1180 kW proton exchange membrane fuel cell (PEMFC) system by Recuperative organic Rankine cycle (RORC).” Energy 157 (Aug): 353–366. https://doi.org/10.1016/j.energy.2018.05.132.
Al-Okbi, Y., A. S. N. Al-murshedi, M. N. Nemah, and H. A. K. Saad. 2021. “Influence of design anode and cathode channel on (PEMFC) fuel cell performance.” Mater. Today: Proc. 42 (5): 2177–2184. https://doi.org/10.1016/j.matpr.2020.12.302.
Anyanwu, I. S., Y. Z. Hou, F. Q. Xi, X. Y. Wang, Y. Yin, Q. Du, and K. Jiao. 2019. “Comparative analysis of two-phase flow in sinusoidal channel of different geometric configurations with application to PEMFC.” Int. J. Hydrogen Energy 44 (26): 13807–13819. https://doi.org/10.1016/j.ijhydene.2019.03.213.
Azam, A. M. I. N., S. H. Lee, M. S. Masdar, A. M. Zainoodin, and S. K. Kamarudin. 2019. “Parametric study on direct ethanol fuel cell (DEFC) performance and fuel crossover.” Int. J. Hydrogen Energy 44 (16): 8566–8574. https://doi.org/10.1016/j.ijhydene.2018.08.121.
Behrou, R., A. Pizzolato, and A. Forner-Cuenca. 2019. “Topology optimization as a powerful tool to design advanced PEMFCs flow fields.” Int. J. Heat Mass Transfer 135 (Jun): 72–92. https://doi.org/10.1016/j.ijheatmasstransfer.2019.01.050.
Berning, T., D. M. Lu, and N. Djilali. 2002. “Three-dimensional computational analysis of transport phenomena in a PEM fuel cell.” J. Power Sources 106 (1–2): 284–294. https://doi.org/10.1016/S0378-7753(01)01057-6.
Cai, Y., D. Wu, J. Sun, and B. Chen. 2021. “The effect of cathode channel blockages on the enhanced mass transfer and performance of PEMFC.” Energy 222 (May): 119951. https://doi.org/10.1016/j.energy.2021.119951.
Chen, H., H. Guo, F. Ye, and C. F. Ma. 2021a. “Experimental investigations on cell performance of proton exchange membrane fuel cells with orientated-type flow channels.” J. Energy Eng. 146 (6): 04020062. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000717.
Chen, X., Z. Yu, X. Wang, W. Li, Y. Chen, C. Jin, G. Gong, and Z. Wan. 2020. “Influence of wave parallel flow field design on the performance of PEMFC.” J. Energy Eng. 147 (1): 04020080. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000735.
Chen, X., Z. Yu, C. Yang, Y. Chen, C. Jin, Y. Ding, W. Li, and Z. Wan. 2021b. “Performance investigation on a novel 3D wave flow channel design for PEMFC.” Int. J. Hydrogen Energy 46 (19): 11127–11139. https://doi.org/10.1016/j.ijhydene.2020.06.057.
Dang, D. K., and B. Zhou. 2021. “Liquid water transport in PEMFC cathode with symmetrical biomimetic flow field design based on Murray’s law.” Int. J. Hydrogen Energy 46 (40): 21059–21074. https://doi.org/10.1016/j.ijhydene.2021.03.161.
Das V., S. Padmanaban, K. Venkitusamy, R. Selvamuthukumaran, F. Blaabjerg, and P. Siano. 2017. “Recent advances and challenges of fuel cell based power system architectures and control: A review.” Renewable Sustainable Energy Rev. 73 (Jun): 10–18. https://doi.org/10.1016/j.rser.2017.01.148.
Ding, Q., H.-L. Zhao, Z.-M. Wan, Y.-R. Yang, C. Yang, and X.-D. Wang. 2020. “Performance of parallel, interdigitated, and serpentine flow field PEM fuel cells with straight or wavelike channels.” J. Energy Eng. 146 (5): 04020054. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000701.
Dong, K. S., G. K. Dong, H. Y. Jin, and S. K. Min. 2019. “Study on the performance improvement of polymer electrolyte membrane fuel cell with inclined channel shape.” Electrochim. Acta 320 (9): 134630. https://doi.org/10.1016/j.electacta.2019.134630.
Dong, P., G. Xie, and M. Ni. 2020. “The mass transfer characteristics and energy improvement with various partially blocked flow channels in a PEM fuel cell.” Energy 206 (Sep): 117977. https://doi.org/10.1016/j.energy.2020.117977.
Dong, P., G. Xie, and M. Ni. 2021. “Improved energy performance of a PEM fuel cell by introducing discontinuous S-shaped and crescent ribs into flowing channels.” Energy 222 (May): 119920. https://doi.org/10.1016/j.energy.2021.119920.
Guo, H., L. L. Wang, X. L. Yi, F. Ye, and C. F. Ma. 2019. “Simulation of mode-switching methods’ effect on mass transfer in a unitized regenerative fuel cell.” J. Energy Eng. 145 (1): 04018071. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000589.
Heidary, H., M. J. Kermani, A. K. Prasad, and S. G. Advani. 2021. “Experimental and numerical studies of enhanced interdigitated flow field for PEM fuel cells.” J. Energy Eng. 147 (4): 04021026. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000767.
Huang, H., H. Lei, M. Liu, T. Wang, L. Chao, X. Guo, Y. Chen, and M. Pan. 2020. “Effect of superior mesenteric artery branch structure-based flow field on PEMFC performance.” Energy Convers. Manage. 226 (Dec): 113546. https://doi.org/10.1016/j.enconman.2020.113546.
Kahraman, H., and M. F. Orhan. 2017. “Flow field bipolar plates in a proton exchange membrane fuel cell: Analysis & modeling.” Energy Convers. Manage. 133 (Feb): 363–384. https://doi.org/10.1016/j.enconman.2016.10.053.
Kang, H. C., K. M. Jum, and Y. J. Sohn. 2019. “Performance of unit PEM fuel cells with a leaf-vein simulating flow field-patterned bipolar plate.” Int. J. Hydrogen Energy 44 (43): 24036–24042. https://doi.org/10.1016/j.ijhydene.2019.07.120.
Kitahara, T., H. Nakajima, and K. Mori. 2012. “Hydrophilic and hydrophobic double microporous layer coated gas diffusion layer for enhancing performance of polymer electrolyte fuel cells under no-humidification at the cathode.” J. Power Sources 199 (Feb): 29–36. https://doi.org/10.1016/j.jpowsour.2011.10.002.
Kordi, M., A. J. Moghadam, and E. Afshari. 2019. “Effects of cooling passages and nanofluid coolant on thermal performance of PEM electrolyte membrane fuel cells.” J. Electrochem. Energy Convers. Storage 16 (3): 031001. https://doi.org/10.1115/1.4042254.
Koresawa, R., and Y. Utaka. 2015. “Water control by employing microgrooves inside gas channel for performance improvement in polymer electrolyte fuel cells.” Int. J. Hydrogen Energy 40 (25): 8172–8181. https://doi.org/10.1016/j.ijhydene.2015.04.113.
Liu, H., W. Yang, J. Tan, Y. An, and L. Cheng. 2018. “Numerical analysis of parallel flow fields improved by micro-distributor in proton exchange membrane fuel cells.” Energy Convers. Manage. 176 (Nov): 99–109. https://doi.org/10.1016/j.enconman.2018.09.024.
Liu, S., H. T. Xu, S. Y. Zhang, and Z. G. Qu. 2021. “Simulation study on the influence of porosity of diffusion layer on the performance of PEMFC.” Therm. Power Eng. 7 (12): 1–7. https://doi.org/10.16146/j.cnki.rndlgc.2021.07.020.
Mohammedi, A., Y. Sahli, and H. Ben Moussa. 2020. “3D investigation of the channel cross-section configuration effect on the power delivered by PEMFCs with straight channels.” Fuel 263 (Mar): 116713. https://doi.org/10.1016/j.fuel.2019.116713.
Oh, H., J. Park, K. Min, E. Lee, and J.-Y. Jyoung. 2015. “Effects of pore size gradient in the substrate of a gas diffusion layer on the performance of a proton exchange membrane fuel cell.” Appl. Energy 149 (Jul): 186–193. https://doi.org/10.1016/j.apenergy.2015.03.072.
Qiu, D., L. Peng, J. Tang, and X. Lai. 2020. “Numerical analysis of air-cooled proton exchange membrane fuel cells with various cathode flow channels.” Energy 198 (May): 117334. https://doi.org/10.1016/j.energy.2020.117334.
Qiu, D., L. Peng, P. Yi, X. Lai, and W. Lehnert. 2018. “Flow channel design for metallic bipolar plates in proton exchange membrane fuel cells: Experiments.” Energy Convers. Manage. 174 (Oct): 814–823. https://doi.org/10.1016/j.enconman.2018.08.070.
Rasaki, S. A., C. Liu, C. Lao, H. Zhang, and Z. Chen. 2021. “The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review.” Renewable Sustainable Energy Rev. 148 (Sep): 111369. https://doi.org/10.1016/j.rser.2021.111369.
Saeedan, M., M. Ziaei-Rad, and E. Afshari. 2020. “Numerical thermal analysis of nanofluid flow through the cooling channels of a polymer electrolyte membrane fuel cell filled with metal foam.” Int. J. Energy Res. 44 (7): 5730–5748. https://doi.org/10.1002/er.5332.
Tang, D., X. Wang, W. Zhao, S. Wang, and Z. Zhu. 2015. “Modeling and simulation of mass transfer process of tubular cathode in a direct ethanol fuel cell.” Electrochemistry 83 (11): 962–968. https://doi.org/10.5796/electrochemistry.83.962.
Vichard, L., N. Yousfi Steiner, N. Zerhouni, and D. Hissel. 2021. “Hybrid fuel cell system degradation modeling methods: A comprehensive review.” J. Power Sources 506 (Sep): 230071. https://doi.org/10.1016/j.jpowsour.2021.230071.
Vijayakrishnan, M. K., K. Palaniswamy, J. Ramasamy, T. Kumaresan, K. Manoharan, T. R. Rajagopal, T. Maiyalagan, V. R. Jothi, and S.-C. Yi. 2020. “Numerical and experimental investigation on and 100 cm2 PEMFC with novel sinuous flow field for effective water removal and enhanced performance.” Int. J. Hydrogen Energy 45 (13): 7848–7862. https://doi.org/10.1016/j.ijhydene.2019.05.205.
Viva, F. A., G. A. Olah, and G. K. Surya Prakash. 2017. “Characterization of Pt supported on commercial fluorinated carbon as cathode catalysts for polymer electrolyte membrane fuel cell.” Int. J. Hydrogen Energy 42 (22): 15054–15063. https://doi.org/10.1016/j.ijhydene.2017.04.255.
Xie, X., B. Ying, S. Xu, H. Jia, F. Dong, and X. Chen. 2020. “Effects of microstructure shape parameters on water removal in a PEMFC lotus-like flow channel.” Int. J. Hydrogen Energy 47 (5): 3473–3483. https://doi.org/10.1016/j.ijhydene.2020.10.239.
Xing, L., M. Mamlouk, and K. Scott. 2013. “A two dimensional agglomerate model for a proton exchange membrane fuel cell.” Energy 61 (Nov): 196–210. https://doi.org/10.1016/j.energy.2013.08.026.
Yasar, O., E. Ozbek, S. Ekici, E. Yalcin, A. Midilli, and T. H. Karakoc. 2021. “Assessment of fuel cell studies with particle image velocimetry applications: A key review.” Int. J. Hydrogen Energy 46 (57): 29568–29582. https://doi.org/10.1016/j.ijhydene.2021.05.027.
Yin, Y., X. Wang, J. Zhang, X. Shangguan, and Y. Qin. 2018. “Influence of sloping baffle plates on the mass transport and performance of PEMFC.” Int. J. Energy Res. 43 (7): 2643–2655. https://doi.org/10.1002/er.4306.
Yin, Y., S. Wu, Y. Qin, O. N. Otoo, and J. Zhang. 2020. “Quantitative analysis of trapezoid baffle block sloping angles on oxygen transport and performance of proton exchange membrane fuel cell.” Appl. Energy 271 (Aug): 115257. https://doi.org/10.1016/j.apenergy.2020.115257.
Zakaria, Z., and S. K. Kamarudin. 2021. “Effect of alkali doping on alkaline stability and cell performance of quaternization polyvinyl alcohol/graphene oxide membranes for passive DEFCs.” Mater. Lett. 292 (Jun): 129651. https://doi.org/10.1016/j.matlet.2021.129651.
Zakaria, Z., S. K. Kamarudin, and S. N. Timmiati. 2016. “Membranes for direct ethanol fuel cells: An overview.” Appl. Energy 163 (Feb): 334–342. https://doi.org/10.1016/j.apenergy.2015.10.124.
Zhan, Z., J. Xiao, D. Li, M. Pan, and R. Yuan. 2006. “Effects of porosity distribution variation on the liquid water flux through gas diffusion layers of PEM fuel cells.” J. Power Sources 160 (2): 1041–1048. https://doi.org/10.1016/j.jpowsour.2006.02.060.
Zhang, S.-Y., Z.-G. Qu, H.-T. Xu, F.-K. Talkhoncheh, S. Liu, and Q. Gao. 2021. “A numerical study on the performance of PEMFC with wedge-shaped fins in the cathode channel.” Int. J. Hydrogen Energy 46 (54): 27700–27708. https://doi.org/10.1016/j.ijhydene.2021.05.207.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Oct 16, 2021
Accepted: Feb 14, 2022
Published online: Apr 22, 2022
Published in print: Aug 1, 2022
Discussion open until: Sep 22, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Peijian Lin, Hongyu Wang, Guodong Wang, Jirui Li, Guogang Yang, Shian Li, Juncai Sun, Design of a Novel Multidimensional Forced-Convections Flow Channel with Both Blockages and Under-Rib Channels for PEMFC, Journal of Energy Engineering, 10.1061/JLEED9.EYENG-4914, 149, 5, (2023).
- Hao Pei, Shuai Liu, Zhong Wang, Libin Zhang, Xiaohang Yao, Effects of Microstructure on Water Removal in the U-Shaped Region of PEMFC Serpentine Flow Channel, Journal of Energy Engineering, 10.1061/JLEED9.EYENG-4875, 149, 5, (2023).
- A. R. Q. Panesi, R. P. Silva, E. I. Santiago, Numerical validation of direct ethanol fuel cell operating at high temperature, Ionics, 10.1007/s11581-022-04852-5, 29, 3, (1039-1052), (2022).